Page 1
Installation Instructions
BRK2504
4" BRAKE CLAW
Serial No.
Parts List
Ref. No. Qty. Part No. Description
1 1 62-3747 ............................................................CLAW, 4" SUB ASSEMBLY PATRIOT
2 1 290-0329 ....................................................................................CLAM SHELL, WIDE
3 1 292-1216 ....................................... CLAM SHELL BORDER/BACKGROUND SHEET
4 1 292-1772 .................................................... LABEL, 1X3 CLAM SHELL (BAR CODE)
5 1 405-0136 ......................................................................................... INSTR, BRK2504
Open the "Claw" and place it on the brake pedal. Note: The easiest way is to place the bottom of the claw
under the pedal rst, then slide the top of the claw over the top of the pedal.
®
This claw is designed to be used with the Patriot
claw does not t around the support holding the brake pedal.
primarily when it is installed in where the top section of the
© 2010 Blue Ox Division, Automatic Equipment Mfg. Co. • One Mill Road, Industrial Park
Pender, Nebraska 68047 • Phone 402-385-3051 • Fax 402-385-3360 • www.blueox.com
Page 1 of 1 405-0136 Rev. A 8/17/10
Loading...