Read this manual prior to initial operation of the product!
Dear Customer,
We hope that your product, which has been manufactured in modern facilities and passed through
a strict quality control procedure, will give you very good results.
We advise you to read through this manual carefully before using your product and keep it for
future reference.
This User Manual will
• Help you use your machine in a fast and safe way.
• Read the User Manual before installing and starting your product.
• In particular, follow the instructions related to safety.
• Keep this User Manual within easy reach for future reference.
• Please read all additional documents supplied with your product.
Remember that this User Manual is also applicable for several other models.
Explanation of symbols
Throughout this User Manual the following symbols are used:
A Important safety information. Warning for hazardous situations with regard to life and
property.
B Caution; Warning for supply voltage.
Caution; Warning for fire hazard.
Caution; Warning for hot surfaces.
Read the instructions.
C Useful information. Important information or useful hints about usage.
This appliance’s packaging material is recyclable. Help recycle it and protect the environment
by dropping it off in the municipal receptacles provided for this purpose. Your appliance
also contains a great amount of recyclable material. It is marked with this label to indicate
the used appliances that should not be mixed with other waste. This way, the appliance
recycling organised by your manufacturer will be done under the best possible conditions,
in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment. Contact your town hall or your retailer for the used appliance collection points
closest to your home. We thank you doing your part to protect the environment.
2960310255_EN/130110.1440
1 Important safety information
This section includes safety information that will
help protection from risks of personal injuries
or materialistic damages. Failure to follow
these instructions shall cause any warranty and
reliability commitment to become void.
General safety
• Never place the machine on a carpet-
covered floor, otherwise, lack of airflow
beneath the machine may cause electrical
parts to overheat. This will cause problems
with your machine.
• If the power cable or mains plug is
damaged, you must call Authorised Service
Agent for repair.
• The product should not be plugged in
during installation, maintenance and repair
works. Such works should always be made
by the technical service. Manufacturer
shall not be held responsible for damages
arising from processes carried out by
unauthorised persons.
• Connect the product to a grounded outlet
protected by a fuse of suitable capacity as
stated in the technical specifications table.
• Operate your product at temperatures
between +5°C and +35°C.
• Do not use electrical devices in the
product.
• Do not connect the air exit of the product
to the chimney holes which are used for
the exhaust fumes of the devices operating
with gas or other types of fuel.
• You must provide enough ventilation in
order to prevent gases exiting from devices
operating with other types of fuels including
the naked flame from accumulating in the
room due to the back fire effect.
• Always clean the lint filter before or after
each loading.
• Never operate your dryer without the lint
filter installed.
• Do not allow fibre, dust and dirt
accumulation around the exhaust exit and
at adjacent areas.
• Power cable plug must be within easy
reach after installation.
• Do not use extension cords, multi-plugs
or adaptors to connect the dryer to power
supply in order to decrease the risk of
electric shock.
• Do not make any changes on the plug
supplied with the product. If it is not
compatible with the socket, have a
qualified electrician change the socket with
a suitable one.
• Items cleaned or washed with gasoil/
fuel oil, dry-laundry solvents and other
combustible or explosive materials as
well as the items that are contaminated
or spotted with such materials should not
be dried in the product since they emit
flammable or explosive vapor.
• Do not dry items cleaned with industrial
chemicals in the dryer.
• Do not dry unwashed items in the dryer.
• Items soiled with cooking oils, acetone,
alcohol, fuel oil, kerosene, stain remover,
turpentine, paraffin and paraffin removers
must be washed in hot water with plenty of
detergent before being dried in the dryer.
• Garments or pillows bolstered with rubber
foam (latex foam), shower bonnets, water
resistant textiles, materials with rubber
reinforcement and rubber foam pads
should not be dried in the dryer.
• Do not use fabric softeners and anti-static
products unless they are recommended by
the manufacturers of the fabric softener or
the product.
• This product must be grounded.
Grounding installation decreases the risk of
electric shock by opening a path with low
resistance for the electricity flow in case of
a malfunction or failure. Power cable of this
product is equipped with a conductor and
a grounding plug that allows for grounding
the product. This plug must be installed
appropriately and inserted into a socket
which is grounded in accordance with the
local laws and regulations.
• Do not install the product behind a door
with a lock, sliding door or a door that has
a hinge against the hinge of the dryer.
• Do not install or leave this product in
places where it will be exposed to outdoor
conditions.
• Do not tamper with the controls.
• Do not perform any repair or part replacing
procedures on the product even if you
know or have the ability to perform unless
it is clearly suggested in the operating
instructions or the published service
manual.
• Inside and exhaust duct of the product
must be cleaned by the qualified service
personnel periodically.
• Wrong connection of grounding conductor
of the product can cause electric shock. If
you have any suspect about the grounding
connection, have it checked by a qualified
electrician, service representative or service
personnel.
3 - EN
• Do not reach into the machine when the
drum is spinning.
• Unplug the machine when it is not in use.
• Never wash down the appliance with
water! There is the risk of electric shock!
Always disconnect by unplugging from the
mains before cleaning.
• Never touch the plug with wet hands.
Never unplug by pulling on the cable,
always pull out by grabbing the plug only.
Do not operate the machine if the power
cable or plug is damaged!
• Never attempt to repair the machine
yourself, otherwise, you will be putting your
life and others’ lives in danger.
• For malfunctions that cannot be solved by
following the information given in the safety
instructions:
Turn off the machine, turn off and contact
an authorised service agent.
• Do not stop the dryer before the drying
cycle comes to an end unless you will
remove all laundry from the dryer fast in
order to lay them and dissipate the heat.
• Remove the door of the drying
compartment before decommissioning or
disposing of the product.
• The final step of the drying cycle (cool-
down cycle) occurs without applying
heat to ensure that the items are left at a
temperature that will not damage them.
• Fabric softeners or similar products should
be used as specified by the fabric softener
instructions.
• Underwear that contains metal
reinforcements should not be placed in
a dryer. Damage to the dryer can result if
metal reinforcements come loose during
drying.
• Check all garments for forgotten lighters,
coins, metal pieces, needles, etc. before
loading.
• At times when your dryer is not in use or
after the laundry is taken out following the
completion of drying process, turn off by
using the On/Off button. In cases when
the On/Off button is on (while the dryer
is energized), keep the door of the dryer
closed.
Intended use
• This product has been designed for
domestic use. It should not be used for
other purposes.
• Use the product only for drying laundry
that are marked accordingly.
• Dry only those articles in your product that
are stated in this manual.
• This product is not intended to be used by
persons with physical, sensory or mental
disorders or unlearned or inexperienced
people (including children) unless they
are attended by a person who will be
responsible for their safety or who will
instruct them accordingly for use of the
product.
Children’s safety
• Electrical appliances are dangerous for
the children. Keep children away from the
machine when it is operating. Do not let
them tamper with the machine.
• Packaging materials are dangerous to
children. Keep the packaging materials out
of reach of children or dispose them by
classifying according to waste directives.
Drying systemHeat Pump, , Condenser, electronic, humidity control
Dimensions
Height / Height for fixed
installation
Widthcm59,5
Depth / Depth for under counter
installation
Depth with door openedcm106.5
Adjusting height of the feetcm1,5
Weight without packagekg61
Ambient temperature(+ 5°C) , (+ 35°C)
Main Model CodeB917H22
Electrical connection
Voltage230 V 50 Hz
Power1200 W
Fuse
Directly delivering the
condensed water to outdoors
Hose diametercm1
Hose lengthmax.cm140
Highest point of the hosemax.cm80
Consumption values
Wardrobe dryness for cottons71400%501.80
Wardrobe dryness for cottons*71000%602.25
Iron dry for cottons71000%601.70
Wardrobe dryness for synthetics3.5800%400.85
Woolens1.5600%501.70
* : Energy Label standard programme (EN 61121:2005)
All values given in the table have been fixed according to EN 61121:2005 Standard. Consumption values may deviate according
to the laundry type, spin speed, environmental conditions and voltage fluctuations.
max.kg7
max. 2
shirts
max. 6
shirts
cm85,0 / 82,0
cm60 / 58
(C-type
time
delaying)
Amount of
laundry (kg)
(Dry Laundry Weight Placed in the Dryer)
0.5
1.5
10 A
Spin Speed
(rpm)
Remaining
humidity
(%)
Power
(kwh)
Time
(minutes)
120
140
110
55
150
5 - EN
2 Installation
Refer to the nearest Authorised Service Agent
for installation of your product.
C Preparation of location and electrical
installation for the product is under
customer’s responsibility.
B Installation and electrical connections must
be carried out by a qualified personnel.
A Prior to installation, visually check if the
product has any defects on it. If so, do not
have it installed. Damaged products will
cause risks for your safety.
Appropriate installation location
• Install the product in an environment which
has no risk of freezing and is in a stable
and level position.
• Operate your product in a well ventilated,
dust-free environment.
• Do not block the air ducts in front of and
under the product with materials such as
long pile rugs and wooden bands.
• Do not place your product on a long pile
rug or on similar surfaces.
• Do not install the product behind a door
with a lock, sliding door or a hinged door
which can strike the product.
• Once the product is installed, it should stay
at the same place where its connections
have been made. When installing the
product, make sure that the rear wall of it
does not touch anywhere (tap, socket, etc.)
and also pay attention to install the product
at a place where it will stay permanently.
BDo not place the product on top of the
power cable.
• Keep at least 1.5 cm distance to walls of
other furniture.
Under counter installation
• A special part (Part no: 295 970 0100)
replacing the top trim must be provided
and installed by the Authorised Service
Agent in order to use the machine under a
counter or in a cupboard. It should never
be operated without the top trim.
• Leave at least 3 cm of space between
the side and rear walls of the product and
the walls of the counter/cupboard when
installing your product under a counter or in
a cupboard.
Mounting over a washing machine
• A fitting device should be used between
the two machines when installing above a
washing machine. The bracket (Part no.
296 280 0100 white/296 280 0200 grey)
must be installed by the Authorised Service
Agent.
• Place the product on a firm floor. If it will be
placed on top of a washing machine, the
approximate weight of both machines may
reach 180 kg when they are full. Therefore,
the floor must be capable of carrying the
load on it!
Connection to water drain
(Products with a condenser);
In products equipped with condenser unit,
water accumulated during the drying cycle
accumulates in the water tank. You should
drain accumulated water after each drying
cycle.
You can directly drain accumulated water
through the water drain hose supplied with
the product instead of periodically draining the
water collected in the water tank.
Connecting the water drain hose:
1. Pull the hose out by its end to remove it
from the product. Do not use any tools to
remove the hose. Attach the drain hose
adaptor to the end of this hose.
2. Connect the special drain hose supplied
with the product to the hose adaptor fitting.
3. Connect the other end of the drain hose
directly to the wastewater drain or to the
washbasin. The fitting must always be
secured in every type of connection. Your
house may flood if the hose comes out of
its housing during water discharge.
C When you direct the water drain to outside,
“Water Tank” warning light will turn on at
the end of each programme.
Important:
• The hose should be attached to a height of
maximum 80 cm.
• Make sure that the hose is not pinched or
bend.
• The end of the hose should not be bent,
it should not be stepped on and it must
not be folded between the drain and the
product.
6 - EN
Adjusting feet
In order to ensure that your product operates
In order to ensure that your machine operates
more silently and vibration-free, it must stand
level and balanced on its feet. Balance the
machine by adjusting the feet.
Rotate the feet to adjust until the machine
stands level and firmly.
C Never unscrew the adjustable feet from
their housings.
Electrical connection
Connect the machine to a grounded outlet
protected by a fuse of suitable capacity as
stated in the technical specifications table. Our
company shall not be liable for any damages
that will arise when the machine is used on a
circuit without grounding.
• Connection must comply with national
regulations.
• If the current value of the fuse or breaker
in the house is less than 10 Amps, have a
qualified electrician install a 10 Amp fuse.
• Power cable plug must be within easy
reach after installation.
• The voltage and allowed fuse or breaker
protection are specified in the “Technical
Specifications” section.
• The specified voltage must be equal to
your mains voltage.
• Do not make connections via extension
cables or multi-plugs.
• The main fuse and switches must have a
contact distance of minimum 3 mm.
B Damaged power cable must only be
replaced by a qualified electrician.
B If the product is faulty, it must not be
operated unless it is repaired! There is the
risk of electric shock!
First use
• To have the product ready for operation
before calling the authorised service agent,
make sure that its location and power
supply installations are appropriate. If they
are not, call a qualified electrician to have
any necessary arrangements carried out.
• Make sure that the power connections of
the product are in accordance with the
instructions given in relevant chapters of
this manual.
Disposing of packaging material
Packaging materials are dangerous to children.
Keep packaging materials in a safe place out
of reach of children. Packaging materials of
your product are manufactured from recyclable
materials. Sort and dispose of them in
accordance with recycled waste instructions.
Do not dispose of them with normal domestic
waste.
Transportation of the machine
1. Unplug the machine from the mains.
2. Remove the water drain (if any) and
chimney connections.
3. Drain water remained in the machine
completely before transportation.
Disposing of the old machine
Dispose of your old machine in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how to
dispose of your machine.
Before disposing of your old machine, cut off
the power cable plug and make the loading
door lock unusable to avoid dangerous
conditions to children.
7 - EN
3 Initial preparations for drying
Things to be done for energy
saving:
• Make sure that you operate the product
at its full capacity but pay attention to not
exceeding it.
• Spin your laundry at the highest speed
possible when washing them. Thus,
the drying time is shortened and energy
consumption is decreased.
• Pay attention to dry same types of laundry
together.
• Follow the instructions in the user manual
for programme selection.
• Make sure that sufficient clearance is
provided at the front and rear side of the
dryer for air circulation. Do not block the
grill at the front side of the product.
• Do not open the door of the machine
during drying unless necessary. If you must
certainly open the door, pay attention not
to keep it open for a long time.
• Do not add new (wet) laundry during
drying.
• Lint and fibres released from the laundry to
the air during the drying cycle are collected
in the “Lint Filter”. Make sure that you clean
the filters before or after each drying.
• In models with condenser, make sure that
you clean the condenser regularly at least
once every month or after every 15 drying
cycles.
• In vented models, follow the chimney
connection rules in the user manual and
pay attention to the chimney cleaning.
• Ventilate the room, where the dryer is
located, well during drying.
• For power saving in models with lamps, at
times when your dryer is not in use, keep
the door closed if the On/Off button is
pressed (if the dryer is energized).
Laundry suitable for drying in the
machine
C Always follow the suggestions on the
laundry labels. Dry only the laundry having
a label stating that they are suitable for
drying in a dryer and make sure that you
select the appropriate programme.
ABC
Low
D
lmn
opq
Laundry unsuitable for drying in
the machine
• Laundry items with metal attachments
such as belt buckles and metal buttons
can damage your dryer.
• Do not dry items such as nylon
stockings,delicate embroidered
fabrics,laundry with metal accessories and
items such sleeping bags in the dryer
• Laundry made of delicate and valuable
fabrics as well as lace curtains can be
creased. Do not dry them in the dryer!
• Do not dry items made of hermetic fibres
such as pillows and quilts in the dryer.
• Laundry made of foam or rubber will be
deformed.
• Do not dry laundry containing rubber in the
dryer.
• Do not dry laundry exposed to petroleum,
oil, combustible or explosive agents in the
dryer even if they are washed beforehand.
• Overly wet laundry or laundry with dripping
water must not be put into the dryer.
• Items cleaned or washed with gasoil/
fuel oil, dry-laundry solvents and other
combustible or explosive materials as
well as the items that are contaminated
or spotted with such materials should not
be dried in the product since they emit
flammable or explosive vapor.
must be washed in hot water with plenty of
detergent before being dried in the dryer.
• Garments or pillows bolstered with rubber
foam (latex foam), shower bonnets, water
resistant textiles, materials with rubber
reinforcement and rubber foam pads
should not be dried in the dryer.
• Do not use fabric softeners and anti-static
products unless they are recommended by
the manufacturers of the fabric softener or
the product.
• Do not dry the underwear reinforced with
metal parts in the dryer. If these metal
reinforcements loosen and break during
drying, they will damage your dryer.
Preparing laundry for drying
• Check all laundry items before loading
them into the product to make sure that
there are no lighters, coins, metal items,
needles and etc. in their pockets or on any
part of them.
• Fabric softeners and similar products
must be used in accordance with the
instructions of the manufacturer of the
relevant products.
• All laundry must be spun at the highest
spin speed that your washing machine
allows for the laundry type.
• Laundry may be tangled after washing.
Separate your laundry before placing them
into your dryer.
• Sort your laundry according to their types
and thicknesses. Dry the same type of
laundry together. E.g.: fine kitchen towels
and table cloths dry faster than the thick
bath towels.
Correct load capacity
C Adding laundry to the machine more
than the level shown in the figure is not
recommended. Drying performance will
degrade when the machine is overloaded.
Furthermore, your dryer and your laundry
can be damaged.
C Place your laundry into the drum loosely so
that they will not get tangled.
CLarge pieces (E.g.: bed sheets, quilt covers,
large tablecloths) may bunch-up. Stop the
dryer 1-2 times during drying process to
separate bunched-up laundry.
Following weights are given as examples.
Home articles
Cotton quit covers (double)1500
Cotton quit covers (single)1000
Bed sheets (double)500
Bed sheets (single)350
Large tablecloths700
Small tablecloths250
Tea napkins100
Bath towels700
the programme in accordance with the
maximum load capacity.
Loading
• Open the loading door.
• Place laundry items loosely into the dryer.
• Push the loading door to close. Ensure that
no items are caught in the door.
9 - EN
4 Selecting a Programme and Operating Your Machine
Control panel
1
96
23
78
1. Washing machine spin speed*/ Timer pro-
gramme selection
Spin speed used to spin the laundry in the
washing machine / Indicates the time for
timer programs.
2. Display
Indicates the status of the machine.
3. Start/Pause/Cancel button
Used to start, pause or cancel the
programme.
4. Programme selection knob
Used to select a programme.
4
5
5. On/Off button
Used to turn on and off the machine.
6. Anti-creasing
Prevents the laundry from creasing after the
machine completes its programme.
7. Dryness level
Used to adjust the required dryness level.
8. Cancel audio warning
Used to cancel the audio warning given at
the end of the programme.
9. Time delaying buttons
Used to set the time delay.
Spin speed / Timer programs
Operation icon
Pause icon
Water tank full warning icon
Filter cleaning warning icon
Condenser cleaning warning icon
Remaining time indicator
Spin speed is used to show the remaining time more accurately.
It does not affect the performance of your machine.
10 - EN
Child-proof lock warning icon
Time delaying mode
Door open warning icon
Anti-creasing mode
Audio warning level / Cancel audio warning
Drying degree
Anti-creasing is activated
Preparing the machine
1. Plug in your machine.
2. Place the laundry in the machine.
3. Press the “On/Off” button.
C Pressing the “On/Off” button does not
necessarily mean that the programme has
started. Press “Start/Pause/Cancel” button
of the machine to start the programme.
Programme selection
Decide the appropriate programme from the
table below which includes drying temperatures
in degrees. Select the desired programme with
the programme selection knob.
Drying at high temperature
only for cotton laundry.
Extra dry
Wardrobe dry
Iron dry
Thick and multi layered
laundry (E.g.: towels,
linens, jeans) are dried in
a way that they do not
require ironing before
placing in the wardrobe.
Normal laundry (E.g.:
tablecloths, underwear)
are dried in a way that
they do not require ironing
before placing in the
wardrobe.
Normal laundry (E.g.,
Shirts, dresses) are dried
ready to be ironed.
C For further programme details, see,
"Programme Selection Table"
Main programmes
Depending on the type of laundry, the following
main programmes are available:
•Cottons
You can dry your durable laundry with this
programme. Dries at high temperature. It is
recommended to use for your cotton items
(such as bed sheets, quilt cover, underclothing,
etc.).
•Synthetics
You can dry your less durable laundry with this
programme. It dries at a lower temperature
compared to the cottons programme. It is
recommended for your synthetic laundry (such
as shirts, blouses, synthetic/cotton blended
laundry, etc.).
C Do not dry curtains and lace in your
machine.
Special programmes
For special cases, there are also extra
programmes available:
C Additional programmes may differ
according to the model of your machine.
•Shirt 30’
You can use this programme to dry your cotton
laundry that you have spun at high speeds in
your washing machine. This programme dries
0.5 kg cotton laundry (2 Shirts) in 30 minutes.
C To obtain better results from your
dryer, your laundry must be washed at
suitable programmes and spun at the
recommended spin speeds in the washing
machine.
•Shirts
This programme dries the shirts more sensitively
and creases them less and thus, helps to iron
them more easily.
C There may be a little humidity on your
shirts at the end of the programme. We
recommend you not to leave the shirts in
the dryer.
•Jeans
You can use this programme to dry your jeans
that you have spun at high speeds in your
washing machine.
C Review the relevant section in the
programme table.
•Mixed
Used to dry synthetic and cotton laundry that
do not release colour. Used for laundry that is
suitable for drying.
•Sport
Used to dry the laundry that are made of
synthetic, cotton or mixed fabrics and have a
tag indicating that they are suitable for drying.
• Silk
You can dry very delicate silk items at lower
temperatures.
CIt is recommended to use a cloth bag to
avoid certain delicate garments and laundry
from getting creased or damaged. Take
your garments immediately out of the dryer
and hang them after the program ends in
order to prevent them being creased.
• Woolens
You can dry woolen clothes and woven articles
with this program.
•Lingerie
Suitable to dry the 100% synthetic or syntheticmixture satin type underwear (night gown,
garments for upper body, pajamas) with the
word dryable in the washing instructions.
Products with a high accessory content such as
lace, veil, stone, beads and wires and products
with a high content of silk should not be dried.
The silk laundry with cotton content or satin
look may remain wet when dried with this
program.
The level of dryness may depend on the
mixture of the cloth, type of knitting and the
humidity content.
11 - EN
•Viscose
You can dry your Viscose laundry that marked
as it can dry in tumble dryer(dresses, shirts,
underwear, etc…). Viscose/polymer, viscose/
cotton mixed laundry is also suitable for this
program.
C It is not recommended to dry laundry
that has accessory of pile textile, lace,
small stones etc… Drying level can be
changeable according to the type and
mixture of laundry.
•Ventilation
Only ventilation is performed for 10 minutes
without blowing hot air. You can air your clothes
that have been kept at closed environments for
a long time and deodourise unpleasant odours
thanks to this programme.
•Timer programs
You can select one of the 10 min., 20 min., 30
min., 40 min., 50 min., 60 min., 80 min., 100
min., 120 min., 140 min. and 160 min. timer
programmes to achieve the desired final drying
level at low temperatures. Programme dries
at the selected time regardless of the drying
temperature.
Time display
The display shows the time remaining for the
programme to complete while a programme is
running. Time is displayed in hours and minutes
as “02:30”. The exemplary display image shows
the dryer when it is running and child-proof lock
is active.
C Programme duration may differ from the
values in the consumption table subject
to the changes in the water hardness and
temperature, ambient temperature, type
and amount of laundry, auxiliary functions
selected, and changes in the supply
voltage..
12 - EN
Programme selection and consumption table
Programme table
SymbolProgrammeLaundry type Capacity
Cottons
Extra dry
A
Synthetics
B
Special programmes
B
Timer Programmes
B
Iron dry
Wardrobe dry
Iron dry
Shirt 30’For your cotton and synthetic shirts (Max. 2 shirts)0.5
Silk For your silk clothes0.5
WoolensFor cotton laundry that has a dry cleaning label1.5
ShirtsFor your cotton shirts (Max. 6 shirts)1.5
MixedFor your cotton and synthetic laundry4
Sport
Lingerie
JeansFor your jeans4
ViscoseFor viscon and modal mixed laundry that bear a dryer label1.5