Block HF1P1, 01-230 Catalog Page

Harmonic filter

HF1P 1,01-230

Advantages

Sinusoidal current consumption from the main in devices with uncontrolled
B2U diode rectifiers

Compliance with EN 61000-3-2, EN 61000-3-12

Support in the compliance with IEEE 519, D-A-CH-CZ

Power factor >0,95 at rated current

Operation at 50 - 60 Hz possible

Use of the HF1P as a central sum filter for multiple converters possible

Applications

Harmonic filter module to ensure sinusoidal main currents, reduction of main
harmonic currents, increase in system service life and system reliability and
compliance with power quality standards such as IEEE 519, TEC 61000-3-2,
IEC 61000-3-12.

Picture shows HF1P 0,59-230

Standards ß Z

Harmonic filter in accordance with
EN 61558 Part 1, EN 61558 Part 20, UL 508 17th Ed., CSA 22.2 No. 14-10

Approvals Z

Harmonic filter

30 1. 0

10 9. 0

13 8. 0

57 .0

27 3. 0

+

-

30

HF1P 1,01-230

Type HF1P 1,01-230

Operating data

Rated voltage
Voltage range
Rated current
THD-I
Rated load power*

Description of the load

Overrating Capacity
Efficiency
Power loss
Capacitive idle power

Input

Rated frequency

Environment

Ambient temperature

Type of cooling

MTBF @ 50 °C/500 V (Mil-HB-217F)

Safety and protection

Type
Insulation class
Protection index
Safety class

Notes

*

Order numbers

Order Number

230 Vac
207-253 Vac

4.44 A
10 % at 50 Hz, 18 % at 60 Hz (nominal load)

1.01 kW
Symmetrical loading by converters with B2U

input rectifiers
150 % for 60 sec. every 10 min.

95.0 %

55.0 W

0.7 kVAr

50 - 60 Hz

-10 °C to +40 °C,
without condensation

AN
>500.000 h

@ 40°C/400Vac

Metal enclosure
H
IP 20
I

IE2 efficiencies of the motors and an efficiency
>96 % assumed

HF1P 1,01-230

Type HF1P 1,01-230

Terminal and mounting

Terminals phase
Terminals PE
Fixing method

Measures and weights

Weight

Screw clamp, 16 mm²
Bolt, M6
Mounting lugs

5.6 kg