Blizzard Lightcaster W-DMX IP Datasheet

IP65 Wireless W-DMX
Transceiver

The LightCaster™ IP W-DMX is an outdoor rated W-DMX transceiver featuring
Wireless Solution’s W-DMX Nano G5 PCB + antenna to allow powerful wireless
DMX/RDM1 capabilities. This device can be quickly and easily changed
between transmitter and receiver with 1-button operation.

The housing is made of a tough, weather resistant aluminum die-cast material
with accurate and legible corrosion-resistant laser engraved markings. The
rear side of the unit is also fitted with IP65 rated power input and 3-pin XLR
input/output data connections.

This unit may be mounted in any safe position provided there is enough room
for ventilation. It can be installed as a fixed installation on a wall or other
surface using screws, or mounted with a standard clamp using the M10 screw
holes found on each foot of the unit.

2.4Ghz

Wireless DMX®

Transceiver

Main Features

• 2.4Ghz W-DMX® wireless system

• 1- button operation

• Transmitter/Receiver

• Weatherproof, IP65 rated

• Up to 500 meter range

• Ultra-stable FHSS technology

Radio Parameters

Operating band: 2.402

- 2.480GHz, ISM

Up to 500 meter range

Latency: < 5mS

Receiver sensitivity:

-94dBm

Transmitter power:

100mW

Weight +

Dimensions

6.1 x 2.8 x 3.8in (155
x70x95mm)

Antenna length: 205mm

Weight: 2.2 lbs (1 kg)

blizzardlighting.com

Control

1- button operation

Protocol: DMX/RDM1

IP65 Seetronic 3-pin

DMX input

IP65 Seetronic 3-pin

DMX output

[e-mail] 1.866.493.6025

Power +

Current

2-year limited warranty

Voltage: 110V/60Hz

Power: 6W

Power in: IP65 Seetronic

TRU1

1.866.493.5025

Warranty