Blizzard LightCaster AnyFi Datasheet

COOLER

BY DESIGN

W-DMX™ + Skywire™ 2.4GHz Wireless
DMX Transceiver

LightCaster AnyFi™ is a USB rechargeable, battery powered
wireless DMX transceiver that is capable of transmitting or
receiving either ultra-stable, Wireless Solutions AB™ W-DMX 2.4
GHz ISM (AFHSS) wireless DMX signals, or Blizzard Lighting’s own
Skywire™ 2.4 GHz band frequencies. It will sync up perfectly to
any Blizzard wiCICLE™ or Skywire™ (7CH) enabled products, plus
there is an additional Skywire™ 6-channel mode that will sync up
awlessly with other AnyFi™ enabled products using this mode.
Skywire™ (6CH) mode is found exclusively in Blizzard Lighting
AnyFi™ brand products.

Its user-friendly operation simplies all the complex
communication protocols, and it features an easy-to-use
4-button TFT display menu interface, making setup a breeze.
And no matter which protocol is used, you can expect to achieve
reliable wireless communication for over 1000 feet (line-of­sight.)

Blizzard Lighting, LLC

Phone: [phone]

Fax: [phone]

Email: [e-mail]

Website: http://www.blizzardlighting.com

When using W-DMX®, you can leave any worries behind
concerning loss of signal due to its built-in FHSS technology
(Frequency Hopping Spread Spectrum). FHSS are frequency
hopping techniques, in which the transmitter jumps from sub­channel to another at a very rapid pace. An unlimited number of
receivers can be controlled by each transceiver, each one able to
control 512 channels of DMX (1 universe).

With Skywire™ 6/7-channel wireless DMX you can pair your
other AnyFi™, wiCICLE™, or Skywire™ transmitting and receiving
units together simply by matching the color coded frequency
groups that illuminate on each of the LED status indicators. With
each frequency group, there are 512 auto-assigning frequencies
that allow each system to run simultaneously in the same space,
completely free of interference!

Main Features

• Built-in Wireless Solutions AB™ W-DMX Transceiver

• Built-in Skywire™ 6/7-Channel Transceiver

• Built-in lithium battery

• TFT display and friendly menu interface

• Adaptive Frequency Hopping Spread Spectrum (AFHSS)

• 32-bit ARM Processor, DMA transfer without delay

• Standard 3-pin XLR In/Out

• 4-button status menu and LED frequency/status indicator

• Plug-and-play operation, pairing mode, supports more transmit­ter universes

Power

• Power Input: DC 5V, ±5%

• Power Consumption: 350 mA@5V DC max.

DMX Signal Interface

• 3-pin XLR Input

• 3-pin XLR Output

Thermal

• Max. Operating Temp.: 104 degrees F (40 degrees C)
ambient

Radio Parameters

• Range: 1,000 FT (line-of-sight)

• Frequency: 2.402-2.480GHz, ISM, 79 channels

• Spread Spectrum: FHSS, 1100 hops / sec

• Modulation: GFSK

• Maximum Transmit Power: 23dBm

• Receiver Sensitivity: -94dBm

Weight & Dimensions

• Width: 3.5 inches (88 mm)

• Lenth: 4 inches (103 mm)

• Height: 1.6 inches (40 mm)

• Weight: 8.8 oz (250 g)

Warranty

• 2-year limited warranty