SBC Type-S- R
■Contents・・・・・・・・・・・・・・・・・１
■Parts List・・・・・・・・・・・・・・・・２
■Safety Notice・・・・・・・・・・・・・３～４
■Before you install・・・・・・・・・・・・５
■Installation Method ・・・・・・・・・６～９
■Operation Method・・・・・・・・・１０～１５
■Before you think breakdown・・・・・・・１６
■Contact ・・・・・・・・・・・・・・・・１７
１
1
年間保証
□連絡先
株式会社ブリッツ サポートセンター
□住 所
東京都西東京市新町
4-7-6
□Ｔ Ｅ Ｌ
０４２２－６０－２２７７
保 証 規 定
カスタマー登録方法
Parts List
Controller Display
φ6 Hose １m
φ6 Crescent Clamp
カスタマー登録方法
ココから切り取ってお送りください。
保 証 規 定
年間保証
Warrenty Sheet
■ TYPE R Only
※ w/ Aluminum Plate
ＣＰＵ Unit
１１
φ4 Nylon Tube 2m
１
４５
Wire Tie
１１
Main Harness
T Pipe Joint
Splice
１１
Double Sided Tape
φ4 Hose Joint
１
２
Installation Manual
１
□連絡先
株式会社ブリッツ サポートセンター
□住 所
東京都西東京市新町
4-7-6
□Ｔ
０４２２－６０－２２７７
１
Solenoid Valve for Type R
■ TYPE S Only
Solenoid Valve for Type S
Conversion Harness
１
Solenoid Fixed Parts
１
Solenoid Fixed Parts
１１
１
２
－ Safety Notice －
In order to use the product safely, please read the " SEFETY NOTICE" thoroughly.
Explanation of warning symbols
Ignoring these indications may cause serious injuries or even death to the individual
警告
注意
□Please read carefully and understand the contents.
・This products is manufactured for vehicles used in circuits or closed courses.
・Notes on "How to use this product" and "Installation procedures" are explained in detail in
this manual.
・Blitz will NOT be responsible of any breakage and malfunctions caused in installing this product
with a vehicle installed with a third party's product and with a reconstructed vehicle.
・Blitz will NOT be responsible of any breakage malfunctions and liabilities caused by wrong
installation and usage.
・This product and its accessories may be changed without announcement for improvement.
警告
and (or) to a third party.
Ignoring these indications may cause serious injuries or injuries to the individual
and (or) to a third party.
Ignoring these indications may cause injuries or minor injuries to the indicidual and
(or) to a third party. It may also cause malfunctions and breakages to the product.
Ignoring these indications may cause serius injuries or even death to the individual
and (or) to a third party.
・Install this product at a well-ventilated area.
Ignoring this indication may cause a fire and an explosion.
・Install this product and its parts firmly at a secured place that would not be of any interference
while driving.
Ignoring this indication would cause an accident.
・This product is designed to work on 12V DC and the ground is designed to be the chassis of the car.
It would cause a fire by installing this product other than a vehicle powered by 12V DC.
・Disconnect the ground line from the battery while installing this product.
It would cause a fire by an electric short, breakage of electronic part and burn.
・Disconnect the harness's connectors from the connectors itself.
Do NOT pull from the harness.
It would cause a fire by an electric short, breakage of electronic part and burn.
Moreover, it would cause some malfunction to this product.
・Discontinue utilizing this product and contact our retailers or us, if you notice some irregular
noise and odor from this product.
By disregarding this symptom, it would cause a fire, electrocution and breakage of electronic part.
・Do NOT operate this product while driving.
It would cause an accident.
・Do NOT damage any wiring and piping from the engine room while installing this product.
It would cause a fire by an electric short, breakage to the engine, vehicle and to the electronic
part. Insulate the unnecessary wiring for the installation.
３
注意
警告
－ Safety Notice －
注意
・Ask for a professional or technician to perform the installation of this product.
The individual performing this installation must have technical skills and knowledge to perform
this installation.
・Do NOT drop or insert extreme force to the product while installing.
It would cause malfunctions.
・Do NOT heat the LCD screen over 60 degrees Celsius for a long period.
It would cause the LCD screen to go black.
・Do NOT misuse, abuse, alter, take apart and modify this product in any way.
It would cause an accident, fire, electrocution and breakage and burn the electronic parts. If any
of the above indications are executed, the warranty of the product will be voided.
・Do NOT install this product at a location where it could get wet and highly heated.
It would cause an electrocution, fire, breakage and burns to the electronic components.
・Do NOT install this product while the engine and its components are hot. Wait until they are fully
cooled
It would cause burn to you or to a third party if the engine, radiator and the exhaust system were
still hot.
・Please perform regular maintenance and be extra cautions.
This product's durability and components are thoroughly tested, however, depending on the vehicle's
driven condition and climate, the durability may decrease.
・Do NOT throw away the original detached components from the vehicle. Please keep the components
securely.
We are NOT liable from any damages caused to the components while installing it.
・Use the right tools to tighten the nuts and bolts.
It will damage the threads if you over tighten it or by using the wrong tools.
・This product has been designed and tested on vehicles with manufacturer's original components.
It would cause malfunctions to the product or vehicle if you have already installed not genuine products.
・About the LCD screen.
The LCD screen may seem dark or distorted if seen through polarized sunglasses.
Ignoring these indications may cause injuries or minor injuries to the individual and
to a third party. It may cause malfunctions and breakages to the product.
Ignoring these indications may cause serious injuries or injuries to the individual
警告
・Be careful when selecting the type turbo exhaust gas bypass.
There are actuator types and waste gate types. If the select has mistaken, it may lead to breakage of
the turbo, engine and the vehicle itself.
・Do NOT over boost.
Blitz Co., Ltd. will not be responsible of any breakages to the turbo caused by over boosting.
・Do NOT operate the boost setups while driving on a public road.
The distraction from the operation may cause an accident.
・Ask for a professional or a technician if there's any strange sound, vibration and smell while driving.
and to a third party.
４
－ Before you install －
■Controller Display
■CPU Unit
Do not apply strong force
or bending and pulling on
nylon hose from the base
position.
It may cause damage.
Select Switch
UP/DOWN Switch
Connect into Controller Display
Connect into Main Harness
Peel off the double sided tape from alminum plate and put to the CPU Unit.
USB Port
Connect Into Wireless Remote Switch
５
Loading...