BLITZ R-VIT DS User Manual
ＩＮＳＴＡＬＬＡＴＩＯＮ ＭＡＮＵＡＬ
ＶＯＬ.１
“ＢＬＩＴＺ”－the abiility to innovate the motor vehicle boundaries.
Ｅstablished in １９８０，“ＢＬＩＴＺ”has revolutionized the automotive industry
－ Index －
● Index ０１
● Parts List ０２
● Safety Notice ０３－０４
● Important Notice ０５－０６
● Installation Method ０７
● ＭＯＤＥ Explanation ０８－０９
● ＭＯＤＥ Diagram １０
● Switch Operation １１－１２
● Initial Setting １３－１５
● Trouble Shooting １６
● ＭＥＭＯ １７－１９
１
－ Parts List －
※ 137 X 98 X 28 mm
※ Length of harness:150 cm
Main Unit
※ Length of Harness: 150 cm ※ Length of Harness: 150 cm
Cigarette Plug
Zip Tie
１
１
１
Remote Controller
RCA Cable
Installation Manual
※ Length of Harness: 30 cm ※ Length of Harness: 14 cm
１
１
１
Main Harness
Battery (CR2025)
Application List
１
１
１
Sensor Harness
Double Sided Tape
１
１
１
２
－ Safety Notice －
DANGER
CAUTION
ATTENTION
ATTENTION
DANGER
■ In order to use the product safely , please read the “SAFETY NOTICE” thoroughly .
＊Notes on“How to use this product”and“Installation procedures”are explained in detail in
this manual. Please read it thoroughly and use it correctly.
＊Blitz Co. Ltd will not be responsible of any breakage and manfunctions caused in installing this
product with a vehicle with a third party’s product(s) and (or) with a reconstructd vehicle.
＊Blitz Co., Ltd will not be responsible of any breakage, malfunctions and liabilities caused by
wrong installation and usage.
＊This product and its accessories may be changed without announcement for improvements.
Explanation of displayed terms.
DANGER
CAUTION
ATTENTION
ATTENTION
DANGER
（Install this product at a well-ventilated area)
Ignoring this indication may cause a fire and (or) an explosion.
（Install this product and its parts firmly at a secured location where it would not be of any
interference while driving）
Ignoring this indication may cause an accident.
（Discontinue utilizing this product immediately and contact a specialist to inspect and perform
maintenance if you notice some irregular vibration, noise and (or) odor from this product）
It is very dangerous if you perform any repairs yourself. Please ask a professional with knowledge in
performing any repairs.
（Ask a professional for an inspection or repair if you in a case the performance of the vehicle or
product feels faulty）
There is a possibility that could lead to an unexpected trouble or an accident if driven without
any action.
（Do not operate this product while driving）
Ignoring this indication may cause an accident.
（Do not misuse, alter, take apart and (or) modify this product in any way)
Please be forewarned that Blitz Co., Ltd will not be liable in any circumstance(s) since it would
not just cause an accident that results in vehicle damage(s); but can also cause death.
（Do not install this product while the engine andits components are hot; wait unitl they are
fully cooler)
It would cause burn(s) to you or to a third party if the engine, radiator and the ehxaust system were
still hot.
An immediate possibility of a serious injury and (or) even death can be assumed to the individual and
(or) to the third party if this indication is ignored and wrongful usage and (or) operation is performed.
A potential possibility of a serious injury and (or) even death can be assumed to the individual and
(or) to the third party if this indication is ignored and wrongful usage and (or) operation is performed.
A potential possibility of a serious injury and (or) injury can be assumed to the individual and (or)
to the third party if this indication is ignored and wrongful usage and (or) operation is performed.
A potential possibility of a malfunction and (or) breakages can be assumed to the product and (or)
to the vehicle if this indication is ignored and wrongful usage and (or) operation is performed.
An immediate possibility of a serious injury and (or) even death can be assumed to the individual and
(or) to the third party if this indication is ignored and wrongful usage and (or) operation is performed.
３
ATTENTION
ATTENTION
－ Safety Notice －
CAUTION
A potential possibility of a serious injury and (or) even death can be assumed to the individual and
CAUTION
（This product is designed to work on a 12V DC and the ground is designed to be the chassis of the vehicle）
It would causea fire by installing this product on other than a vehicle powered by a a 12V DC.
（Disconnect the ground line from the battery while installing this product）
It would cause a fire by an electronic short, breakeage of electronic part(s) and (or) burn(s).
（Do not install this product at a location where it could get wet and (or) highly heated）
It would cause and electrocution, fire, breakage and (or) burn(s) to the electronic components.
（Do not damage any wiring(s) and (or) piping(s) from the engine compartment while installing this product.
It woule cause a fire by an electric short, breakage to the engine, vehicle and (or) to the electronic
part(s). Insulate the unnecessary wiring(s) from the installation.
（Disconnect the harness from the connectors. DO NOT pull from the harness）
It would cause a fire by an electric short, breakage of electronic part(s) and (or) burn(s). Moreover,
it would also cause malfunction(s) to this product.
（Be extra careful when operating the active control）
There is a possibility in damaging the engine if the active control is operated based on feeling.
Moreover, do not continuously operate the active control. Do not operate unless you have professional
knowledge. Blitz will not be liable of any damage(s) csued from the misused of this function.
(or) to the third party if this indication is ignored and wrongful usage and (or) operation is performed.
A potential possibility of a serious injury and (or) injury can be assumed to the individual and (or)
ATTENTION
（Make sure to ask for a professional to perform the installation of this product）
Professional knowledge and technique is needed for the installation. Wrong usage and installation might
cause vehicle and (or) engine malfunction.
（This product is a precision machine. Do not apply excess force and (or) drop before the installation）
Operational malfunction will occur which might cause breakage to the vehicle.
（Regarding wireless apparatus）
Refrain the installation of wireless apparatus such as remote controller, radar detectors, etc that are
not approved by us. It might cause malfunctions influenced by the radio waves.
ATTENTION
（Make sure to ask for a professional to perform the installation of this product）
Professional knowledge and technique is needed for the installation. Wrong usage and installation might
cause vehicle and (or) engine malfunction.
（This product is a precision machine. Do not apply excess force and (or) drop before the installation）
Operational malfunction will occur which might cause breakage to the vehicle.
（Regarding wireless apparatus）
Refrain the installation of wireless apparatus such as remote controller, radar detectors, etc that are
not approved by us. It might cause malfunctions influenced by the radio waves.
to the third party if this indication is ignored and wrongful usage and (or) operation is performed.
A potential possibility of a malfunction and (or) breakages can be assumed to the product and (or)
to the vehicle if this indication is ignored and wrongful usage and (or) operation is performed.
４
－ Important Notice －
In order to operate this product properly and safely, please read this intallation manual/application chart and also
vehicle’s monitor operation instruction, before installation/operation.
Also, for this products and other oprtional equipments, please read each individual instruction manuals.
■About This Product
This product is monitoring system designed for vihicles : 2003 or later CAN-BUS system equipped Toyota cars, and
vehicles with 1996 or later ISO14230 equivelant diagnostic connector.
Monitored ECU information is displayed on vehicle moniter through supplied video/audio cables.
Note
To view the information while driving, please set the monitor so that video/audio input is displayed/played
while driving. TV JUMPER which enable the function is available, however, TV JUMPER is not available for
all vehicle types.For application, please check our website. (http://www.blitz.co.jp )
Option: Code17551 ＴＶ ＪＵＭＰＥＲ ＤＶ
Vehicle specific harnesses are sold separately.
①Easy, simple Installation
Plugs direcltly into vehicle diagnostic connector.
Video/Audio signals are connected to vehicle monitor using enclosed Video/Audio cable.
Code17552 ＴＶ-ＮＡＶＩ ＪＵＭＰＥＲ ＤＶ
Note
In case that the vehicle monitor is not equipped with external video/audio input, additional input harness is
required to connect to the monitor. (Sold separately)
We cannot confirm the compatibility of the monitor even if R-VIT DS is applicable to the vehicle,
②Flash Memory
By employing the flash memory, R-VIT DS is ready for the future software update.
③External equipment ready
Update such as additional BLITZ boost controller is possible using EXT connection.
④Up to 6 informatuion can be displayed out of more than 30 kinds of information available
This depends on vehicle type. Please refer to application chart.
⑤Can display fuel milage status
This depends on vehicle type. Please refer to application chart.
⑥Card type remote control
Easy to operate with included remote controller.
Please refer to “Switch Operation”. (Page.11-12)
Mode LED
（Front）
IR receiving port
PEAK CLEAR ＢＡＣＫ
ＲＩＧＨＴ
IR sending port
ＵＰ
ＬＥＦＴ
ＥＮＴＥＲ
LED display pattern
①Connection established: ON
②Connection is NOT established: FLASH
Note: Connection with ECU,
not external equipments
Audio R S VideoAudio L
Video
（Back）
External equipments connector
（Side）
５
ＤＯＷＮ
ＲＥＣ
ＰＬＡＹ
ＭＡＰ
ＥＳＣ１
（Remote Controller）
ＳＴＯＰ
ＥＳＣ２
－ Important Notice－
■Display/Control Item List
Ｎｏ
０１
０２
０３
０４
０５
０６
０７
０８
０９
１０
１１
１２
１３
１４
１５
１６
１７
１８
１９
２０
２１
２２
２３
２４
２５
２６
２７
２８
２９
３０
３１
３２
３３
Item Title
SPEED
TACHO
WATER TEMP
IGNIT
INJCT
AIR FLOW
INT-T
OUT-T
INMANI PRESS
BOOST
O2F
O2R
A/F1
A/F2
AIR
BATT
THROT
ATF-T
GEAR
4WD
FUEL PRESS
EXT V
EXT A/F
EXT PRESS
EXT TEMP
MILEAGE
AVRG Average Fuel Milage
DIAG
LOCK UP
FUELPRESS CONT
FUELINJCT CONT
FAN CONT
BLANK
Vehicle Speed
Engine Speed
Engine Coolant Water Temp
Ignition Timing
Injector Open Time
Air Flow Sensor Voltage
Intake Air Temperature
Outside Air Temperature
Intake Manifold Temperature
Boost Pressure
Oxygen Sensor Voltage (Front)
Oxygen Sensor Voltage (Rear)
Air Flow Sensor 1
Air Flow Sensor 2
Air Intake Volume
Battery Voltage
Throttle Opening
Automatic Transmissinon Fluid Temperature
Automatic Transmission Gear Position
4WD Distribution Ratio
Fuel Pressure Sensor Voltage (High)
External Input Voltage (Volt)
External Input Voltage (A/F Box)
External Input Voltage (Press Sensor)
External Input Temperature (Temp Sensor)
Instantaneous Fuel Milage
Number of DIAG reported
Automatic Transmission Lock-up
Fuel Pressure Active Control
Fuel Injection Active Control
Electric Cooling Fan Active Control
Do Not Display Any Item
Item Content
Unit
ＳＩ
km/h
rpm
℃
deg
ms,%
V,%
℃
℃
hkPa
hkPa
V
V
－
－
g/s
V
V,%
℃
－
%
hkPa
V
－
hkPa
℃
km/l
km/l
－
－
%
%
℃
－
ＵＳＡ
MPH
rpm
°
Ｆ
deg
ms,%
V,%
°
Ｆ
°
Ｆ
PSI
PSI
V
V
－
－
g/s
V
V,%
°
Ｆ
－
%
PSI
V
－
PSI
°
Ｆ
m/USG
m/USG
－
－
%
%
°
Ｆ
－
Meter
Main
○○○○○
○○○○○
○○○○○
○○○○○
○○○○○
○○○○○
○○○○○
○○○○○
○○○○○
○－
○○○○○
○○○○○
○○○○○
○○○○○
○○○○○
○
○○○○○
○○○○○
○○○○○
○○○○○
○○○○○
○○○
○
○
○○○○○
○
○○○○○
－
－
－
－
－
－
3 fold
Main
Sub
－－－
○○ ○ ○
－－－－
－－－－
○○ ○ ○
○○ ○ ○
○○ ○ ○
－－－－
－－－－
－－－－
○○ ○ ○
6
fold
Main
Sub
○○
FUEL
○
○
○
○
○
○
○
○
○
－
○
○
○
○
○
○
○
○
○
○
○
○
－
－
○
○
○
○
○
－
－
－
－
Graph
A/F
－
－
－
－
－
－
－
－
－
－
－
－
○
○
－
－
－
－
－
－
－
－
○
－
－
－
－
－
－
－
－
－
－
Control
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
○
○
○
－
Rec
Play
○
○
○
○
○
○
○
○
○
－
○
○
○
○
○
○
○
○
○
○
○
○
－
－
○
○
○
○
○
－
－
－
－
WARN
○
○
○
○
○
○
○
○
○
－
○
○
○
○
○
○
○
○
○
○
○
○
－
－
○
○
－
○
○
－
－
－
－
* Above displayed data is directly captured from ECU control signals.
Therefore, the displayed value may vary from the factory original meters.
* R-VIT DS converts analog input to digital value and displays the data .
Thus, fluctuation and/or frequent change in value is normal.
* Items which can be displayed/controlled varies depending on vehicle types. Please refer to vehicle application chart.
* AVRG (Average Fuel Milage) is the avarage from Ignition ON. data is cleared when the ignition is turned off.
Also, Fuel Milage is calculated only when it is displayed.
Note
A/F BOX or Press Senor (Both sold separately) can be connected to EXT voltage input port.
Temp Sensor EXT (Sold Separately) can be connected to EXT temp input port.
Optional Parts: Code 19210 Temp Sensor Set
Code 19211 Press Sensor Set
Code 15063 A/F Box
６
Loading...