BLITZ Power Meter i-D User Manual

Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes Online Manual Not For Resale Purposes

INSTALLATION AND OPERATING INSTRUCTIONS

FUNCTION MENU:

- POWER DIGITAL DISPLAY

- SPEED DIGITAL DISPLAY

- POWER/SPEED DIGITAL DISPLAY

- GRAPHICAL POWER DISPLAY

- GRAPHICAL SPEED DISPLAY

- CHASSIS DYNAMO

- DASH MODE

- LAST RECORD

- WARNING

INSTALLATION INSTRUCTIONS:

Connect the RED wire to an ignition 12v supply and find a suitable ground for the BLACK wire. The ORANGE wire needs to be connected to the ECU speed output. To locate the correct ECU pin, refer to ECU booklet. Using your vehicles chassis and engine code to locate the correct ECU map, attach the orange wire using the provided wire tap to the ECU speed output wire.

IMPORTANT - When installing, ensure that the orange wire is connected to the ECU speed output before the speed de-limiter or speed converter (if fitted). If it is connected after this, it may cause incorrect operation of the unit.

CALIBRATION:

* When the Power Meter is turn on for the first time, you will be in the WEIGHT. PW LOSS mode. This mode calibrates the Power Meter. NOTE: Weight of the vehicle will be in kg, to set weight in lbs, press MENU button and scroll down to SPD UNIT, press ENTER and scroll up to MPH and press ENTER to set. Next go back to MENU and scroll down to POW UNIT and set power in HP, PS, and kW.

SET UP AND CALIBRATION press ENTER. Once in this mode you can set the weight of the vehicle, if it is 2WD/4WD, and set the power loss. To set, press ENTER button and use the up/down button to set weight, 2WD/4WD, and power loss. Weight of the vehicle can be found in the vehicle owner manual, make sure you take into consideration your own weight, any passengers you may have and fuel in the tank. NOTE: weight effects the accuracy of Power Meter. Set if car is 2WD/4WD and also set the Power Loss, see back of manual to see Power Loss of each type of vehicle.

SPEED CALIBRATION to drive with the Power Meter in calibration mode at a steady 25mph and press ENTER.

- After the speed and power unit has been set, scroll back to WEIGHT. PW LOSS &

- Scroll to SPEED CALIB and press ENTER. To calibrate the Power Meter, you will need

Page 1

o powe w t pea eco d. o c a ge t e powe sca e, p ess N o ce a d t e powe u t sy bo o t e g t

OPERATION INSTRUCTIONS:

BASIC OPERATIONS:

* All functions can be accessed from the main menu. Use the up/down buttons to select the function you require, then press ENTER button to access that display. * All functions can also be accessed by scrolling up/down while in the function already. * To reset PEAK HOLD of speed and power, press the up/down button together while in CHASSIS Dynamo mode. * To set Power and Speed scale, go the menu and scroll down to GRAPH SCALE and press ENTER. Set a suitable scale of the vehicle's power and speed.

FUNCTIONS:

POWER DIGITAL DISPLAY

Shows the amount of power the engine is producing in HP, PS, or kW. Features a digital and numerical display

ower with peak record. To change the power scale, press ENTER once and the power unit symbol on the right

of hand side of the screen will become highlighted. Use the up/down keys to adjust the scale to suite and press ENTER once to confirm. Or refer to basic operations to set appropriate power graph.

SPEED DIGITAL DISPLAY

Screen appears as above with the same features but will show the vehicles speed in mph or km/h instead. To change the speed scale, press ENTER once and the speed unit symbol on the right hand side of the screen will become highlighted. Use the up/down keys to adjust the scale to suite and press ENTER once to confirm. Or refer to basic operations to set appropriate speed graph.

POWER/SPEED DIGITAL DISPLAY

Shows the speed and power of the vehicle in numerical form and allows you to select between a digital display of power or speed. To select between the two digital displays available, press ENTER once, then use the up/down keys to select which quantity and scale you wish to use. When selected, press ENTER to confirm. Or refer basic operations to set appropriate speed and power graph. NOTE: SPEED is only available in km/h in this function.

Page 2

+ 3 hidden pages

BLITZ Power Meter i-D User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual