In Car Video
IVMR-9002 7 607 003 586
IVMR-1042 7 607 003 587
Operating and installation instructions
http://www.blaupunkt.com
DEVICE OVERVIEW
5
1 2 3 4 1
6
>
?
@
=
<
16
8:
9; 7
A
DEVICE OVERVIEW
Ceiling-mounted monitor
1 Lights on the main unit
2 Light switch ON
3 Monitor latch
4 Vehicle interior lighting switch
5 Loudspeaker
6 Infrared receiver for IR remote
control IVRC-06
Infrared transmitter for IR head-
phones IVHS-01 (accessory)
7 Control button
Increase the monitor volume /
navigate in the OSD menu
8 Control button
Decrease the monitor volume /
navigate in the OSD menu
9 On/off button for the monitor
: Control button MENU
See Instructions / OSD menu.
; Control button CH
Channel selection if the monitor is
connected to a signal controller
IVSC-3302 or IVSC-5502.
< LCD screen
= Signal cable (13 pin)
> System cable (13 pin)
? Adapter cable RCA/jack (13 pin)
@ Cable for the interior lighting
(3 pin)
Red = Electrical power supply
(+12V)
White = To the door switch
(Door open = Earth)
Black = Earth
A
AUX
sockets
Red RCA = Audio IN (R)
White RCA = Audio IN (L)
Yellow RCA = Video IN
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
17
PORTUGUÊS
DANSK
DEVICE OVERVIEW
D
E
F G
H
I
J
IR remote control
D POWER
On/off button for the monitor.
E TV/VIDEO
Input selector: switch between
AV1 and AUX.
F VOL • arrow button
Increase the volume for the selected monitor.
VOL • arrow button
Decrease the volume for the selected monitor.
G MUTE
Mute the volume of the loudspeaker inside the monitor.
H CH • arrow button
Channel selection if the monitor is
connected to a signal controller
IVSC-3302 or IVSC-5502.
Caution:
The way the CH / buttons
function depends on the monitor
selection, which is made using
the signal controller’s remote control.
I MENU
See Instructions / OSD menu.
J Battery compartment
/
18
Device overview ..................... 16
Ceiling-mounted monitor................ 17
IR remote control ........................... 18
Contents................................. 19
Notes for the user .................. 20
Precautionary measures ................ 20
Safety notices ........................ 21
Supplied parts ........................ 21
Installing the monitor ............. 22
Installing the monitor (mechanical) . 22
Cables .......................................... 23
Operation ............................... 24
Controlling the interior lighting
(monitor) ....................................... 24
Opening the monitor ...................... 24
Adjusting the position of the
monitor .......................................... 25
Closing the monitor ....................... 25
Switching on the monitor ............... 25
OSD menu .................................... 26
IR headphones IVHS-01
(accessory) ................................... 26
Changing the light bulb ................. 27
Changing the battery in the
remote control ............................... 27
Specifcations ......................... 28
IVMR-9002.................................... 28
IVMR-1042.................................... 29
CONTENTS
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
19
PORTUGUÊS
DANSK
NOTES FOR THE USER
Thank you for choosing a Blaupunkt
product. We hope you enjoy using this
new piece of equipment.
Please read these operating instructions before using the equipment for
the first time.
The Blaupunkt editors are constantly
working on making the operating instructions clearer and easier to understand. However, if you still have any
questions on how to operate the device,
please contact your dealer or the telephone hotline for your country . You will
find the telephone number printed at the
back of this booklet.
We provide a manufacturer guarantee
for our products bought within the European Union. You can view the guarantee conditions at www.blaupunkt.de
or ask for them directly at:
Blaupunkt GmbH
Hotline
Robert-Bosch-Str. 200
31139 Hildesheim
Germany
We should like to point out that the right
to make a claim under the guarantee
could be forfeited if the device is
changed or modified in any way without the express authorization of the
manufacturer.
Long-term operation or storage outside
the specific temperature range can lead
to a shortening of the useful life of the
LC display .
Precautionary measures
Please observe all the warning notices,
precautionary measures and maintenance tips contained in these operating instructions so as to extend the life
of your monitor.
● If you are the driver you must never
use the monitor during the journey
in order to avoid causing a road accident.
● Do not place the monitor in the fol-
lowing positions:
1. Positions in which it could
restrict the driver’s view.
2. Positions in which it could
become a danger to safety
(e.g. handbrake, steering wheel,
gearshift lever and airbag).
● Only operate the device with the
recommended voltage supply of
12 V direct current.
● Do not attempt to open or disman-
tle the monitor, since you could suffer an electric shock as a result.
● If the monitor’s housing is dam-
aged or broken, take it to your local
specialist dealer or send it in to our
customer service centre.
● Avoid using the monitor in environ-
ments where it is subjected to dust,
dirt or moisture.
● Do not install the monitor in places
where it is subjected to direct sunlight or extreme temperatures.
20
NOTES FOR THE USER
SUPPLIED PARTS
Note
We recommend that you allow a specialist workshop to carry out the installation.
Safety notices
Please observe the following safety
notices during installation and whilst
making the connections.
- Disconnect the negative and positive terminals of the battery.
- When doing so, please observe the
safety notices provided by the vehicle manufacturer.
- Before drilling the holes necessary
for mounting the equipment and for
laying cables, please make sure
that concealed cables, the fuel tank
and fuel lines cannot be damaged
in the process!
Supplied parts
The monitor is supplied with all the parts
listed below. Please check that the
range of parts supplied with your device is complete. If one of the listed parts
is missing, please contact your dealer
immediately.
● Monitor (including mounting fixture
and screws)
● Remote control IVRC-06 with
battery
● 5 m long 13-pin system cable
(for signal controller IVSC-3302 or
IVSC-5502)
● Connection adapter (13-pin RCA/
jack)
● Operating instructions
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
21
ESPAÑOL
PORTUGUÊS
DANSK
INSTALLING THE MONITOR
Installing the monitor (mechanical)
Select a suitable position for secure
installation of the monitor:
● The device must not distract the
driver or restrict the driver’s view.
● The ability to enter and get out of
the vehicle must not be impeded.
● The device must not be installed in
such a way that could prevent the
other vehicle components from
functioning properly (e.g. sliding
sunroof).
● Make sure that the device is in-
stalled in a safe and secure position and that it cannot become detached in the event of an emergency stop.
● Do not attach the device merely to
the roof liner.
● If you need to drill additional holes,
make sure you do not drill through
the sheet metal of the vehicle’s
roof.
● Avoid using the monitor over a
longer period of time whilst the engine is off in order to prevent the
battery from becoming discharged.
Screws for securing the
mounting plate
Screws for securing the
ceiling-mounted monitor
22
INSTALLING THE MONITOR
Cables
>
System cable
(13 pin)
Signal cable
(monitor housing) (13 pin)
=
?
Adapter cable
Cable for the
interior lighting
(3 pin)
@
Interior lighting connection (3 pin)
Red = Operating voltage (+12 V)
White = To the door switch
(Door open = Earth)
Black = Earth
To avoid discharging the battery, we
recommend you use a switched operating voltage (ignition).
Warning notice: The operating voltage
cable must be protected with at least a
1.5 A fuse.
Monitor connection (13 pin)
Connect the system cable (13 pin) >
to a signal controller (IVSC-3302 or
IVSC-5502). (The voltage supply is provided by these devices. Operating instructions are supplied with the devices).
Or
Use the plug-in adapter cable ? to
connect to the 12 V supply voltage and
an external video/DVD device:
Red = +12 V direct current
Black = Earth
Red RCA = Audio IN (R)
White RCA = Audio IN (L)
Yellow RCA = Video IN
Jack plug
(blue) = Do not use!
(Only for special
devices)
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
23
DANSK
OPERATION
Controlling the interior lighting (monitor)
There are two switches for the lights:
ON 2 and interior lighting 4.
ON :
This button is used to switch the lights
on/off.
Interior lighting :
If activated, the lights only come on
when the vehicle’s doors are opened.
2 4
Opening the monitor
➮ Pull back the monitor release latch
3 to flip down the LCD display.
➮ To watch television, lower the mon-
itor until it is at an angle of approx.
90° to the monitor’s base unit.
3
24
Adjusting the position of the monitor
The monitor can be rotated by up to
approx. 30° to the right and left from its
central viewing position.
D
OPERATION
8:
9; 7
E
F G
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
Closing the monitor
➮ Turn the monitor back to its central
viewing position and push it into its
base unit so that it clips back into
the releasing/locking mechanism.
Switching on the monitor
Press the power-on button 9 on the
main unit or the button D on the remote control to switch the monitor on/
off.
Note:
The button 9 lights up blue before the
monitor is switched on. This means that
the monitor is connected to the 12 V
voltage supply .
H
I
J
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
DANSK
25
OPERATION
OSD menu
Operation
➮ Press the MENU button : on the
display or the MENU button I on
the remote control to open the
OSD menu.
●
Use the arrow buttons 7 / 8 or
I / to select the options. After
you press the MENU button : or
I you can use the arrow buttons
to change the settings.
➮ Select the “EXIT” option to close
the OSD menu again.
SPEAKER ON
ZOOM
BRIGHTNESS
CONTRAST
COLOR
TINT
REVOLVE LEFT-RIGHT
RESET PICTURE
EXIT
●
SPEAKER ON
Switch the internal loudspeaker on/
off (same function as the MUTE
button G on the remote control).
The sound then continues to be
outputted over the IR headphones
IVHS-01 (accessory).
UP-DOWN
●
ZOOM (picture size)
only IVMR-9002:
Change the picture height/width
- FULL
- NORMAL
- WIDE
●
BRIGHTNESS:
To adjust the brightness
●
CONTRAST:
To adjust the contrast
●
COLOR:
To adjust the colour
●
TINT:
To adjust the picture shade (only
for NTSC)
●
REVOLVE:
To revolve the screen display
- LEFT - RIGHT:
Mirror horizontally
- UP - DOWN:
Mirror vertically
●
RESET PICTURE:
To reset the configured parameters
to the factory default settings.
●
EXIT:
To close the OSD menu
IR headphones IVHS-01 (accessory)
The IR transmitter window 6 must not
be covered up when using the IR headphones IVHS-01 (accessory).
26
OPERATION
Changing the light bulb
➮ Detach the monitor from the ceiling
plate (4 screws).
Screws for securing the
ceiling-mounted monitor
➮ Remove the 3 screws of the metal
cover (see picture below).
➮ Take out the old bulb.
➮ Fit a new bulb (12 V, 3 W).
➮ Refit the monitor.
Light bulb specifications
Diameter: 8 mm
Length: 28 mm
Voltage: 12 V, 3 W
Changing the battery in the remote control
➮ Push the button on the battery
compartment J to the right (see A
below).
➮ Pull the battery compartment J
out of the remote control (see B
below).
➮ Change the 3 V battery (CR 2025).
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
Metal cover
Bulb
ESPAÑOL
A
J
B
PORTUGUÊS
DANSK
27
SPECIFICATIONS
IVMR-9002
Screen size: 9" Monitor
Screen resolution: 1440 (H) x 234 (V)
Active area: 198.0 (H) x 1 11.74 (V)
Signal system: Dual system NTSC/P AL
Brightness: 300 cd/m
Contrast ratio: 100
Viewing angle: Left/right: 65/65 degrees
Up/down: 50/65 degrees
Video input level: 1.0 Vpp ± 10 %
Audio input level: 0.3 Vrms
AUX input level: 1.0 Vpp ± 10 %
Carrier frequency for IR sensor: L-CH: 2.3 MHz
R-CH: 2.8 MHz
Operating voltage (direct current): 10-16V
Current consumption: 1 A (at +12V)
Quiescent current consumption: 35 mA (at +12 V)
Operating temperature: 0 - 60 °C
Storage temperature: - 30°C to +80°C
Dimensions: 286 x 258 x 57.4 mm
Weight: ≤ 2150 g
2
28
Subject to changes!
SPECIFICATIONS
IVMR-1042
Screen size: 10.4" Monitor
Screen resolution: 1920 (H) x 480 (V)
Active area: 211.2 (H) x 158.4 (V)
Signal system: Dual system NTSC/PAL
Brightness: 290 cd/m
Contrast ratio: 100
Viewing angle: Left/right: 60/60 degrees
Up/down: 40/50 degrees
Video input level: 1.0 Vpp ± 10 %
Audio input level: 0.3 Vrms
AUX input level: 1.0 Vpp ± 10 %
Carrier frequency for IR sensor: L-CH: 2.3 MHz
R-CH: 2.8 MHz
Operating voltage (direct current): 10-16V
Current consumption: 1.1 A (at +12 V)
Quiescent current consumption: 70 mA (at +12 V)
Operating temperature: 0 - 60 °C
Storage temperature: - 30°C to +80°C
Dimensions: 322 x 305 x 63.5 mm
Weight: ≤ 2450 g
2
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
Subject to changes!
PORTUGUÊS
DANSK
29
Service-Nummern / Service numbers / Numéros du service aprèsvente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Números de
serviço / Servicenumre
Country: Phone: Fax: WWW:
Germany (D) 0180-5000225 05121-49 4002 http://www.blaupunkt.com
Austria (A) 01-610 390 01-610 393 91
Belgium (B) 02-525 5454 02-525 5263
Denmark (DK) 44 898 360 44-898 644
Finland (FIN) 09-435 991 09-435 99236
France (F) 01-4010 7007 01-4010 7320
Great Britain (GB) 01-89583 8880 01-89583 8394
Greece (GR) 210 57 85 350 210 57 69 473
Ireland (IRL) 01-4149400 01-4598830
Italy (I) 02-369 6331 02-369 6464
Luxembourg (L) 40 4078 40 2085
Netherlands (NL) 023-565 6348 023-565 6331
Norway (N) 66-817 000 66-817 157
Portugal (P) 01-2185 00144 01-2185 11111
Spain (E) 902-120234 916-467952
Sweden (S) 08-7501500 08-7501810
Switzerland (CH) 01-8471644 01-8471650
Czech. Rep. (CZ) 02-6130 0441 02-6130 0514
Hungary (H) 01-333 9575 01-324 8756
Poland (PL) 0800-118922 022-8771260
Turkey (TR) 0212-3350677 0212-3460040
USA (USA) 800-2662528 708-6817188
Brasil
(Mercosur) (BR) +55-19 3745 2769 +55-19 3745 2773
Malaysia
(Asia Pacific) (MAL) +604-6382 474 +604-6413 640
Blaupunkt GmbH
01/04 CM/PSS2 - 8 622 403 936
Loading...