Blaupunkt CHICAGO IVDM-7002 EU, CHICAGO IVDM-7002 User Manual

In Car Video In-Dash Monitor/DVD/CD/MP3/Receiver

Chicago IVDM-7002

Operating instructions

www.blaupunkt.com

Remote control – general functions

31

2

1 2

29

27

25

23

6

8

10 11

12 13

15

18

Remote control – general functions

1 MUTE key

Key to mute the loudspeakers

2 OPEN/CLOSE key

Extend/retract the monitor

6 DISP / WALLPAPER key

Monitor retracted: Switches between displaying the time and the active audio source Monitor extended: Changes the screen background (wallpaper)

8 VOL

Increase/ decrease the volume

: NAVI key

Activate navigation mode

;

Keys for browsing through the on-screen menu

< ENTER key

Confirm the chosen menu item

= SETUP key

Open and close the setup menu

? DOWNMIX key

Switch the audio downmix on/off

B REAR key

Display the image from an optional reversing camera

G TILT

Adjust the monitor’s tilt

/ key

/ and / keys

-

/ + key

I LCD key

Adjust the colour of the display

K SRC key

Select a different signal source In the setup menu: Open the sub-menu

M SOUND / DSP key

Display the settings of the audio functions

O

/ POWER key

Key for switching the device on and off

3

Remote control – DVD mode

30

28

4

3 4

5

7

9

11

24

21

14 16 17

19

Remote control – DVD mode

3 TA / AUDIO key

Select the audio track

4 AF / SUBTITLE key

Select the subtitle on DVDs that offer multilingual subtitles

5 Numeric keys 0 - 9

Press the numeric keys to enter title or chapter numbers

7

9

;

>

@ PTY / ZOOM keys

A WIDE key

C GOTO key

E REPEAT key

H RDS / MENU key

/ PLAY/PAUSE key

Key to interrupt and resume playback

/ RETURN key

Stop key to stop playback

/ and / keys

Keys for browsing through the main menu

/ keys

Hold these keys down for fast forward or reverse

Zoom (+) or zoom (-)

Swap formats 16:9 / 4:3

Selection menu for directly selecting a chapter

Repeat a chapter or title

Display a DVD’s main menu

/ keys

L

Skip to the previous or following chapter

N REG / ANGLE key

Select the camera perspective on DVDs offering the multiangle function

5

Remote control – radio

30

28

26

24

14 16

6

3 TA / AUDIO key

Switch the TA function on or off

3 4

4 AF / SUBTITLE key

Switch the AF function on or off

5 Numeric keys 1 - 6

5

Tune into stations that have been stored automatically or manually. Press a key and hold it down for 1 second or longer to store the station that is currently tuned.

>

/ keys

Manually search for stations upwards/downwards

@ PTY / ZOOM key

Open the PTY menu

H RDS / MENU key

Open the radio menu

J BAND key

Change the waveband Press the key and hold it down for 1 second or longer to search for stations and save them automatically

/ key

L

Search upwards/downwards automatically

N REG / ANGLE key

Switch the REG function on or off

Remote control – CD/CD changer/MP3 mode

7 / PLAY/PAUSE key

;

< ENTER key

28

22 21

11 12

14

20

21

7

>

D SCAN key

E REPEAT key

F MIX key

L

Key to interrupt and resume playback

/ key

Choose the track or file in MP3 mode

/ key Select the following or previous disc/file in CD changer and MP3 mode

Confirm the selection of the track or file

/ keys

Hold these keys down for fast forward or reverse

Play a 10-second sample of each of the files or tracks

Play a disc, track or file again

Play tracks or files in random order

/ keys Skip to the following or previous track or file

7

Controls – Chicago IVDM-7002

32 33 35 3634 37

4548 40 39 3847 46 43 4242 44 41

8

Controls – Chicago IVDM-7002

P SRC key

Choose the signal source you want.

Q NAVI key

Switch to navigation mode (assuming an optional navigation system is installed).

R LCD display S DIS / FLIP multi-function key

Monitor retracted Short press: Switch between displaying the time and audio source. Long press: Change the background colour of the display. Monitor extended Fold the monitor up/down

T

U Retractable TFT monitor V key

W TUNE

X BND / BSM key

Y Reset key

key

Retract/extend the monitor

Key to unlatch the front cover.

/ key This key can be used in radio/CD/DVD mode to change to the previous or the following station, title/track or programme.

Short press: Change between the three FM memory banks and the AM waveband Long press: Start the Travelstore function.

Z Key 1 / -DISC: Change to the previous CD or previous di-

rectory in CD changer/MP3 mode. Key 2 / DISC+: Change to the next CD or next directory in

CD changer/MP3 mode. Key 3 / ZOOM: This key activates the zoom function in

DVD mode. Key 4 / RPT: In CD/CD changer /MP3 mode this key is

used to repeat individual tracks or the whole CD. Key 5 / MIX: In CD/CD changer/MP3 mode this key is

used to start playing individual tracks in random order. Key 6 / SCAN: You can listen to short samples from the

current CD by pressing this key in CD/CD changer/MP3 mode.

[

\ CD/DVD compartment ] key

a

b VOL

c Infrared receiver for the remote control

key

Switch the device on or off and mute the loudspeakers.

Key for playing and pausing in CD/DVD mode

key

Eject the inserted CD/DVD.

-

/ + key

Increase or decrease the volume.

9

Safety comments

CD/DVD

• For reasons of safety, a CD/DVD must only be inserted or removed when the vehicle is stationary.

•A DVD can only be played when the vehicle is stationary.

Operating while driving

You can cause serious accidents if you do not pay attention to the traffic. Observe the following points to avoid being distracted by the Chicago IVDM-7002:

• Familiarise yourself with the controls before setting off on your journey.

• Stop somewhere suitable if you want to reprogram the Chicago IVDM-7002.

• Only operate the controls of the Chicago IVDM-7002 when driving if traffic conditions permit.

10

Contents

Controls – Remote control ............................................ 2

Controls – Chicago IVDM-7002 ..................................... 8

Safety comments ......................................................... 10

User instructions.......................................................... 13

Precautions............................................................................. 13

Caring for CD-ROMs/DVDs .................................................... 14

Usable CD types..................................................................... 14

Regional code ....................................................................................... 15

Licence.................................................................................................. 15

Notes on these instructions........................................16

Detachable control panel ............................................ 17

Theft protection...................................................................... 17

Detaching the control panel.................................................. 17

Attaching the control panel................................................... 17

Introduction .................................................................. 18

Operation ................................................................................ 18

Switching the device on ........................................................................ 18

Switching off.......................................................................................... 18

Inserting CDs/DVDs .............................................................................. 19

Ejecting CDs/DVDs ............................................................................... 19

Adjusting the volume............................................................................. 20

Activate muting ..................................................................................... 20

Cancel muting ....................................................................................... 20

Monitor tilt ............................................................................................. 21

Picture format........................................................................................ 21

Select signal source .............................................................................. 21

Audio functions ..................................................................................... 22

Downmix ............................................................................................... 22

Adjust the display colour ....................................................................... 23

Reversing camera ................................................................................. 23

Screensaver .......................................................................................... 23

Play – Radio..................................................................24

Switching to radio mode........................................................................ 24

Selecting the waveband / memory bank ............................................... 24

Convenient RDS functions (AF, REG) .................................................. 25

Switching AF on and off ........................................................................ 25

Switching REG on/off ............................................................................ 25

Tuning into stations manually................................................................ 26

Automatic station seek tuning ............................................................... 26

Storing stations ..................................................................................... 26

Storing stations automatically (Travelstore) .......................................... 26

Programme type (PTY) ......................................................................... 26

Selecting the programme type .............................................................. 27

Manually start the PTY search .............................................................. 27

Traffic radio station................................................................................ 27

Traffic announcement standby.............................................................. 28

Adjust the announcement volume for radio mode ................................ 28

Adjust the announcement volume for DVD/CD/MP3/AUX mode .......... 29

Play – DVD .................................................................... 30

DVD .......................................................................................... 30

Open DVD menu................................................................................... 30

Play/pause ............................................................................................ 30

Search for a title or chapter (skip) ......................................................... 30

Search for a title or chapter (direct selection) ....................................... 31

Fast forward / reverse ........................................................................... 31

Select the playback language ............................................................... 32

Select subtitles ...................................................................................... 32

Repeat .................................................................................................. 32

Zoom ..................................................................................................... 33

Camera angle ....................................................................................... 33

Play – CD....................................................................... 34

Audio CD mode ...................................................................... 34

Audio CD menu..................................................................................... 34

Opening the audio CD menu ................................................................ 34

Play/pause ............................................................................................ 34

11

Contents

12

Track search (skip)................................................................................ 34

Fast forward / reverse ........................................................................... 35

Repeat .................................................................................................. 35

Random play ......................................................................................... 36

Scan ...................................................................................................... 36

Play – CD changer........................................................ 37

CD changer ............................................................................. 37

Open CD changer menu ....................................................................... 37

Play/pause ............................................................................................ 37

Select CD .............................................................................................. 38

Fast search ........................................................................................... 38

Select track (skip) ................................................................................. 39

Restart track.......................................................................................... 39

Repeat .................................................................................................. 39

Random play ......................................................................................... 40

Scan ...................................................................................................... 40

Play – MP3 .................................................................... 41

MP3.......................................................................................... 41

Open MP3 menu ................................................................................... 41

Play/pause ............................................................................................ 41

Select directory ..................................................................................... 41

Select MP3 file (skip) ............................................................................ 42

Restart MP3 file .................................................................................... 42

Fast search ........................................................................................... 42

Repeat .................................................................................................. 42

Random play ......................................................................................... 43

Scan ...................................................................................................... 43

Play – AUX/Navigation ................................................. 44

Additional devices (AUX)....................................................... 44

Navigation............................................................................... 44

Setting the speech output for navigation mode..................................... 45

Setup Menu...................................................................46

Select the setup menu .......................................................................... 46

General settings ..................................................................... 46

Select menu .......................................................................................... 46

DVD Setup............................................................................... 47

Language .............................................................................................. 47

Display .................................................................................................. 47

Parental Control .................................................................................... 48

Audio setup ............................................................................ 49

Input sensitivity ..................................................................................... 49

Adjusting the ProLogic2 audio effect..................................................... 49

Adjusting the sound effects audio effect ............................................... 50

Adjusting the downmix audio effect (for two-zone operation) ............... 51

7-Band equalizer ................................................................................... 51

Loudspeakers ....................................................................................... 52

Delay ..................................................................................................... 53

Volume level.......................................................................................... 54

Dynamic range ...................................................................................... 54

Test tone ............................................................................................... 55

Monitor setup ......................................................................... 55

Monitor tilt ............................................................................................. 55

Screen settings ..................................................................................... 56

User setup............................................................................... 56

Change password ................................................................................. 57

Image management .............................................................................. 57

Select background image ..................................................................... 58

Automatic change ................................................................................. 58

Delete images ....................................................................................... 59

Load background image ....................................................................... 59

Set the date and time ............................................................................ 61

Select external signal source ................................................................ 61

Factory settings..................................................................................... 62

Restarting the device software.............................................................. 63

Glossary........................................................................64

Specifications...............................................................65

DVD Language Code Table .......................................... 66

User instructions

Thank you for choosing a Blaupunkt product. We hope you enjoy using this new piece of equipment.

Please read these operating instructions before using the equipment for the first time.

The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the device, please contact your dealer or the telephone hotline for your country. You will find the telephone number printed at the back of this booklet.

We provide a manufacturer guarantee for our products bought within the European Union. You can view the guarantee conditions at www.blaupunkt.de or ask for them directly at:

Blaupunkt GmbH Hotline Robert-Bosch-Str. 200

31139 Hildesheim Germany

We wish to point out that the right to claim against warranty is invalidated by any changes or modifications to the device that have not been explicitly approved by the manufacturer.

Precautions

Observe all the warnings, precautions and notes on servicing provided in this user manual in order to extend your monitor’s service life.

●

As the driver, do not use the monitor when driving to avoid traffic accidents.

●

Only run the device from the recommended 12 V DC power supply.

●

Do not attempt to open the monitor or to dismantle it, as this can result in an electric shock.

●

If your monitor develops a fault, take it to a dealer near you or send it to our customer service department.

●

Avoid using the monitor in an environment where it will be exposed to dust, dirt or moisture.

●

Make sure that you do not keep the Equipment Passport, included with these instructions, in the vehicle.

Risk of severe damage to the CD drive! CD singles with a diameter of 8 cm and non-circular contoured CDs (shape CDs) must not be used. We accept no responsibility for any damage to the CD drive that may occur as a result of using unsuitable CDs.

To avoid damage to the CD drive, please ensure that you do not stick any labels on the surface of the CD and that you do not use a CD protective film or stabiliser (available in shops as CD accessories).

13

User instructions

14

The internal CD drive is a Class 1 laser product generating a visible or invisible laser beam of a potentially hazardous type. The CD drive must only be operated in accordance with the specified instructions. Never open the housing, and do not attempt to perform repairs yourself. Any servicing should be carried out by trained personnel.

Caring for CD-ROMs/DVDs

If a CD-ROM/DVD becomes dirty, never clean it with circular movements, but use a soft, lint-free cloth to clean it from the inside to the outside. In cases of heavy soiling we recommend washing the CD/DVD using normal washing up liquid. Here again do not clean the CD/DVD with circular movements, but always from the inside to the outside before leaving it to dry.

We also recommend that you handle the CD/DVD very carefully on both the upper and lower sides, because the structure of the CD/DVD places the information layer immediately under the printed side (the label).

Whenever possible, only hold the CD/DVD by the edge.

Comments on readability:

Any soiling or damage to a CD/DVD can make it difficult to read. The seriousness of the read error depends on the dirt and on the seriousness of the mechanical damage. Deep scratches cause read errors (data errors), and these can make the CD/DVD jump or get stuck. Always therefore handle your CD/DVDs carefully, and always keep them in a protective sleeve.

Usable CD types

CD-Rs/CD-RWs (CDs that you have burned yourself) can usually be played. However, because CD quality varies, Blaupunkt cannot guarantee that the device will function correctly.

To ensure that audio CDs function properly, only use CDs marked with the compact disc logo. Problems might be experienced when trying to play copy-protected CDs. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!

User instructions

Regional code

Code Region

1 North America, including the USA and Canada 2 Japan, Europe (not Eastern Europe), the Near East,

South Africa 3 Korea and South-East Asia 4 Oceania, including Australia, New Zealand, Central

and South America 5 India, Eastern Europe, Africa, Russia 6 China

All All regions

The Chicago IVDM-7002 and the DVDs are labelled with the regional code that identifies them for the relevant countries.

The device is set permanently to the regional code that applies to the country where it was sold.

It is not possible to play a DVD that has a different regional code. This player supports the following disc formats: DVD / DVD-R / DVD-RW / VCD / SVCD / CD / CD-R / CD-RW /

MP3

Licence

Manufactured under licence from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. The product contains components and uses techniques protected by specific US patents. The intellectual property is owned by the Macrovision Corporation and other patent holders. The use of this protected technology must be approved by the Macrovision Corporation. It is licensed only for private use, or for showing under other limited circumstances, unless approval for other uses has first been granted by the Macrovision Corporation.

15

Notes on these instructions

These instructions describe the functions of your Chicago IVDM7002, and will familiarise you with its operation. Read these instructions carefully before you operate your device for the first time, and follow the instructions displayed on the monitor.

Note: The display that appears on the LCD when the monitor is retracted is shown beneath the illustration of the TFT display when necessary.

The following symbols are used to identify individual steps, so that you can quickly locate information in these instructions:

1. Identifies actions that you must take in order to achieve the desired result.

✔ Reactions from the device that should follow an action are

identified in this way.

Note: Depending on the type of DVD being played, it is possible that some functions cannot be used, or cannot be used in the way in which they are described in these instructions.

16

Detachable control panel

S R

C

D I S

N A

V I

V O

L

-D IS

C

D I

S C

+

Z O

O

M

R P

T

M

IX

S

C

A

N

T U

N E

B S

M

C

H

I

C

A

G

O

I

V

D

M

-

7

0

2

4

5

6

1

2

3

B N

D

Theft protection

Your device is equipped with a detachable control panel (release panel) as a theft protection measure. The device is worthless to a thief without this control panel.

Protect your device against theft by taking the control panel with you whenever you leave your vehicle. Do not leave the control panel inside your vehicle – not even in a hiding place.

The control panel is designed to be easy to detach and re-attach.

Detaching the control panel

1. Press the key.

✔ The control panel latch mechanism opens.

2. First, pull the control panel straight off the device and then out towards the right.

S

R C

N A

V I

D IS

V O

L

C

H

IC

1

A

G

-DISC

O

IV

D

M

2

-7 0

D

0

IS

2

C +

3

Z O

O

M

4

R P

T

5

M

I X

6

S

C

A

N

B S

M

T

B

U

N

D

E

✔ The device switches off about 30 seconds after the control

panel is detached. All the current settings are saved. Any CD/DVD already inserted in the device remains there.

Attaching the control panel

1. Slide the control panel from right to left into the device’s

guide.

2. Press the right hand edge of the control panel into the device until it clicks into place.

Note: The device does not switch itself on again automatically even if it had been switched on when the control panel was last removed.

Never drop the control panel. Never expose the control panel to direct sunlight or other heat sources. Store the control panel in the supplied case.

17

Introduction

STATION

REG

18

Operation

The most important general functions are described in this section.

All the menus shown on the monitor and the device display remain visible for 3 seconds.

Switching the device on

1. Press the key on the device or the key on the re-

mote control to switch on your Chicago IVDM-7002.

✔ The device will start playing in the most recent operating

mode.

Note: If the monitor was retracted when the device was switched off, it will remain in that position after being switched on.

STATION

Radio 21

None

AFAFTATAREG

105.8

TP

MHz

R.D.S

FM 1

1. Radio 21

2. NDR 2

3. Antenne

4. FFN

5. 148.1 MHz

6. 150.9 MHz

RADIO

A1 534

1

ch

Radio display with monitor closed

The Welcome screen is displayed after the system has started up.

Note: The device automatically starts up in whatever operating mode was set last.

Switching off

1. To switch off, hold the key on the device pressed for

more than two seconds, or press the

key on the remote

control.

✔ The monitor, if extended, will be retracted, and the device

will switch off.

Note: Any actions required to control the device that could distract you from the road traffic should only be carried out when the vehicle is stationary. Videos cannot be played while driving. Only sound reproduction is possible when driving. The warning shown above will be displayed on the monitor. Watching videos while driving can distract you from the traffic and lead to accidents.

01:05

LOADING

EJECT

Introduction

Inserting CDs/DVDs

1. Insert the CD/DVD with the printed side upwards.

LOADING

Loading display with monitor closed

✔ Replay starts automatically.

Ejecting CDs/DVDs

1. Press the key to eject the disc.

EJECT

Eject display with monitor closed

✔ The DVD/CD is ejected.

EJECT

19

Introduction

STATION

REG

STATION

UTE

20

Adjusting the volume

STATION

Radio 21

R.D.S

AFAFTATAREG

FM 1

VOL

None

105.8

11

TP

MHz

A

1. 105.8 MHz

2. 138.5 MHz

3. 140.5 MHz

4. 145.1 MHz

5. 148.1 MHz

6. 150.9 MHz

RADIO

VOL 5

Volume display with monitor closed

The volume is adjusted with the VOL - / + keys and is displayed on the monitor A.

1. On the device: Press the VOL + key to increase the vol- ume. Press the VOL

-

key to decrease the volume.

On the remote control: Press the VOL key to increase the volume. Press the VOL key to decrease the volume.

Activate muting

RADIO

1. 105.8 MHz

2. 138.5 MHz

3. 140.5 MHz

4. 145.1 MHz

5. 148.1 MHz

6. 150.9 MHz

MP3

Mute display with monitor closed

STATION

Radio 21

R.D.S

FM 1

t01-02 48

-

AF TA REG TP

1. On the device: Press the key briefly. On the remote control: Press the MUTE key.

✔ Audio output is silenced.

Cancel muting

1. Press the key again to cancel the muting.

✔ The muting is deactivated.

None

105.8

m

UTE

m

UTE

MHz

STATION

MONITOR TILT

-2

+2

+1

REG

Introduction

Monitor tilt

STATION

Radio 21

None

AFAFTATAREG

-2

105.8

MONITOR TILT

-1-1+1+1O +1

01:05

TP

MHz

+2

R.D.S

FM 1

1. 105.8 MHz

2. 138.5 MHz

3. 140.5 MHz

4. 145.1 MHz

5. 148.1 MHz

6. 150.9 MHz

RADIO

1. On the remote control: Press the TILT + or TILT - keys to adjust the tilt of the monitor.

Note: Press the DIS / FLIP key to tilt the monitor to a flat position without closing it. Press the key again to return the monitor to its original position.

Picture format

1. On the device: The picture format can only be adjusted

through the Setup menu. On the remote control: Press the WIDE key to switch be-

tween the wide and normal picture formats.

Note: Picture formats: WIDE (16:9) –> NORMAL (4:3)

Select signal source

1. On the device and on the remote control: Press the SRC

key repeatedly until the desired signal source is found. Available signal sources: RADIO > CD/DVD > (CD-C) > AUX1 > AUX2 > AUX3 > (IVSC)

Note: The IVSC signal source is only available to you if an IVSC is connected. The content displayed depends then on the source selected by the IVSC.

Note: CD-C can only be selected if a CD changer is connected. The AUX sources can only be selected if they are activated in the Setup menu.

21

SFC

TI

TRACK

Introduction

22

Audio functions

A

1. TRACK 1

2. TRACK 2

3. TRACK 3

4. TRACK 4

5. TRACK 5

6. TRACK 6

SFC Control

Audio-CD

Flip Item

TRACK

01

Change value

TI

m

E

SFC

00:21'35

NORMAL

OFF

Select and adjust the audio function:

1. On the remote control: Press the SOUND / DSP key. ✔ The current audio function is displayed on the status line

at the bottom of the monitor A.

2. Press the / keys to select a different audio function.

3. Press the / keys to make adjustments to the current

audio function.

Note: The current setting or option is displayed at the bottom right of the monitor. You will find more information in the “Audio Setup” section of the “Setup Menu” chapter.

You can make the following settings:

Sound effects

OFF > Studio > Hall > Church > Stadium > Movie > Club

Dolby PL II

OFF > Pro Logic > Music > Movie > Matrix

7-Band equalizer

Flat > Classic > Jazz > Rock > Pop > Ballad > Dance > User

Balance

< Left, Right >

Fader

< Rear, Front >

4. Press the SOUND / DSP key to return to the main menu.

Downmix

The multi-channel surround signal is converted to a stereo signal and played through the loudspeakers.

On the remote control: Press the DOWNMIX key to switch

1.

the downmix function on.

2. Press the key again to cancel the downmix function.

Introduction

Adjust the display colour

Adjusting the colour of the display:

1.

On the device: Hold the DIS / FLIP key down until the colour changes. Repeat this procedure until you have the colour you want.

On the remote control: Press the LCD the key repeatedly

until you have the colour you want. The LCD display can adopt the following colours: Light blue > red > pink > yellow > white > blue > green >

Reversing camera

The Chicago IVDM-7002 can be fitted with a reversing camera (as an accessory). It is switched on automatically when reverse gear is engaged. Please read the section “Select an External Signal Source” in the chapter on the “Setup Menu” to activate this function.

Note: Press the REAR key on the remote control to switch on the reversing camera manually. Press the key again to switch the reversing camera off.

Screensaver

The screensaver becomes active if the disc is not played for five minutes or more in DVD, CD or MP3 mode.

The screensaver is also activated if a key is not pressed for about two hours when playing music (radio, audio CD, CD changer or MP3 CD).

The screensaver cannot be switched off.

23

Play – Radio

STATION

REG

STATION

24

This device is equipped with an RDS radio receiver. Many FM stations broadcast a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears on the monitor on the display as soon as the tuner receives it.

STATION

Radio 21

MHz

A B C

None

AFAFTATAREG

105.8

01:05

TP

R.D.S

FM 1

D

1. Radio 21

2. NDR 2

3. Antenne

4. FFN

5. 148.1 MHz

6. 150.9 MHz

RADIO

A Station name B Status indication C Display: memory bank and frequency D Station memory

Switching to radio mode

1. On the device or on the remote control: Press the SRC

key to select the radio.

✔ The waveband is displayed as text, stereo mode via a

symbol on the display.

ST

F1 1058

FM Radio display with monitor closed

.

1

ch

Selecting the waveband / memory bank

This radio receives stations both in the VHF (FM) waveband and MW (AM) stations. Three memory banks are available for the FM waveband, and one for MW. Six stations can be stored in each memory bank.

On the device or on the remote control: Press the BND /

1.

BSM or BAND key.

2. Press the BND / BSM or BAND key repeatedly until the

waveband that you want is displayed (FM1 > FM2 > FM3 > AM1).

STATION

Radio 21

AF TA REG TP

R.D.S

FM 1

None

105.8

MHz

1. Radio 21

2. NDR 2

3. Antenne

4. FFN

5. 148.1 MHz

6. 150.9 MHz

RADIO

01:05

Play – Radio

ST

F1 1058

ST

F2 1058

ST

F3 1058

A1 534

Selecting the waveband/memory bank (FM1 > FM2 > FM3 > AM)

Convenient RDS functions (AF, REG)

The convenient RDS functions AF (Alternative Frequency) and REG (Regional) extend the range of your radio’s functions.

●

AF: If you activate this RDS function, the radio automatically tunes into the best receivable frequency for the station that is currently set.

●

REG: At certain times, some radio stations divide their programme into regional programmes providing different content. The REG function prevents the radio from switching to alternative frequencies that have different programme content.

.

1

ch

.

1

ch

.

1

ch

1

ch

Switching AF on and off

1. Press the RDS / MENU key on the remote control.

✔ “RDS Set” appears on the bottom line of the monitor.

2. Select “AF Set” with the / keys.

3. Press the / keys to switch the AF function on or off.

Note: Alternatively you can switch the function on or off by pressing the AF / SUBTITLE key.

Switching REG on/off

1. Press the RDS / MENU key on the remote control.

✔ “RDS Set” appears on the bottom line of the monitor.

2. Select “REG Set” with the / keys.

3. Press the / keys to switch the REG function on or off.

Note: Alternatively you can switch the function on or off by pressing the REG / ANGLE key.

25

Play – Radio

STATION

26

Tuning into stations manually

You can also tune into stations manually.

1.

On the device or on the remote control: Press the /

keys to do this.

Automatic station seek tuning

1. On the device: Press the / key and hold it down.

2.

On the remote control: Press the / key and hold it

down.

Note: The radio will search through the waveband until it finds a strong signal that will provide good reception.

Storing stations

Preset stations are available at the push of a button. Tune to the station you want.

1. Press one of the station keys 1 - 6 on the device and hold

it down. When the station has been saved its frequency or the name of

the station will be displayed next to the number of the station button on the left-hand side of the monitor.

Note: You can save a maximum of 18 FM stations (six each under FM1, FM2 and FM3) and 6 MW stations.

If the Chicago IVDM-7002 is disconnected from the supply voltage, all the station settings will be lost, and will have to be stored again.

STATION

Radio 21

AF TA REG TP

R.D.S

FM 1

None

105.8

01:05

MHz

1. Radio 21

2. NDR 2

3. Antenne

4. FFN

5. 148.1 MHz

6. 150.9 MHz

RADIO

Storing stations automatically (Travelstore)

You can automatically save the six strongest FM stations in the region under station keys 1 - 6.

1. Press the BND / BSM key on the device and hold it down.

Note: Automatic saving will replace any preset stations that were previously assigned to the station keys.

Programme type (PTY)

Besides transmitting the station name, some FM stations also provide information on the type of programme. The device can receive and display this information.

Examples of programme types include: NEWS SPORT POP MUSIC ROCK MUSIC DRAMA CULTURE FOLK MUSIC You can use the PTY function to select stations of a particular

programme type.

Play – Radio

STATION

REG

STATION

Selecting the programme type

1. Press the PTY / ZOOM key on the remote control.

✔ The available programme types will be displayed on the

monitor.

2. Use the

/ keys to select the programme type you

want, and then press the ENTER key.

✔ The search will begin and the next station with the select-

ed programme type is tuned in.

RADIO

PTY Search

All

News

Current Affairs

Information

Sport

Note: The PTY function is switched off if ALL is se-

STATION

Radio 21

None

AFAFTATAREG

105.8

01:05

TP

MHz

R.D.S

FM 1

lected as the programme type.

Manually start the PTY search

1. Press the

/ keys on the remote control.

✔ The search will begin and the next station with the select-

ed programme type is tuned in.

Note: If no station is found offering the chosen programme type the PTY function is switched off and the station that was being received most recently is restored.

Traffic radio station

“TP” A (Traffic Programme) appears on the monitor when you are listening to a station that broadcasts traffic announcements on the FM waveband.

STATION

Radio 21

AF TA REG TP

R.D.S

FM 1

None

105.8

MHz

A

1. Radio 21

2. NDR 2

3. Antenne

4. FFN

5. 148.1 MHz

6. 150.9 MHz

RADIO

01:05

27

Play – Radio

STATION

REG

STATION

28

Traffic announcement standby

1. Press the RDS / MENU key on the remote control.

✔ “RDS Set” appears on the bottom line of the monitor.

2. Select “TA Set” with the

RADIO

1. Radio 21

2. NDR 2

3. Antenne

4. FFN

5. 148.1 MHz

6. 150.9 MHz

TA S e t

TA Set

Flip Item

STATION

/ keys.

Radio 21

R.D.S

Change value

AFAFTATAREG

FM 1

None

105.8

on

TP

MHz

3. Press the / keys to switch traffic announcement standby on or off A. (When standby is activated the device will play traffic announcements).

Note: Alternatively you can switch the function on or off by pressing the TA / AUDIO key.

A

Adjust the announcement volume for radio mode

1. Press the RDS / MENU key on the remote control.

✔ “RDS Set” appears on the bottom line of the monitor.

2. Select “TA Radio” with the / keys.

Flip Item

STATION

Radio 21

Change value

AF TA REG TP

R.D.S

FM 1

None

105.8

10

MHz

B

1. Radio 21

2. NDR 2

3. Antenne

4. FFN

5. 148.1 MHz

6. 150.9 MHz

TA Radio

RADIO

3. Press the / key to adjust the volume of announce- ments. The level is displayed on the monitor B.

Note: The level chosen is added to the selected radio volume when an announcement is made.

Play – Radio

Adjust the announcement volume for DVD/CD/MP3/AUX mode

1. Press the RDS / MENU key on the remote control.

✔ “RDS Set” appears on the bottom line of the monitor.

2. Select “TA Volume” with the

3. Press the / key to adjust the volume of announce-

ments.

Note: When an announcement is made the audio source (DVD/CD/MP3/AUX) is muted, and the announcement is made with the volume set here. Addition, as in the case of radio, does not take place.

/ keys.

29

Play – DVD

TI

CHAP

TITLE

30

DVD

A BC

TITLE

DVD

OFF

A Display/input of current title B Display/input of current chapter C Elapsed playing time D Subtitle language E Playback language F Clock time

00

O unknown

DEF

Open DVD menu

1.

On the device or on the remote control: Press the SRC key repeatedly until DVD is shown as the signal source.

TI

m

000

E

00:00'52

CHAP

Note: The system changes to DVD mode automatically when a DVD is inserted. DVD playback is continued for passengers in the back seats if a different signal source (radio, AUX, CDC) is selected on the device.

1418

-

t01 C004

01:05

D

The time, Dolby Digital etc. are shown on the display.

D

Press the DIS / FLIP key to display more information.

Play/pause

DVDs are automatically read and played when they are inserted. Playback can be interrupted and restarted using the / PLAY/

PAUSE key on the device.

Search for a title or chapter (skip)

Press the / key on the device or on the remote control to skip to the beginning of the next or previous chapter.

TI

CHAP

TITLE

Play – DVD

Search for a title or chapter (direct selection)

1.

On the remote control: Press the GOTO button.

✔ The DVD menu appears.

2. Press the GOTO until the cursor flashes behind the title or chapter A.

3. Enter the number of the title or chapter that you want with the numeric keys 0 - 9 on the remote control, and press the ENTER key.

✔ Play continues from the chosen title/chapter.

A

TI

m

E

00:00'52

_

00:00'52

_

01:05

DVD

OFF

00

O unknown

CHAP

TITLE

Fast forward / reverse

To move forwards or backwards at high speed during playback

1. Press the

/ key on the remote control.

✔ Fast forward/reverse B begins.

2. By pressing the / keys repeatedly you can change the forward or reverse speed (by factors of 1.5, 2, 4, 6 or 8).

Note: Sound is not played and subtitles are not shown during fast forwarding or reversing.

3. Press the

/ PLAY/PAUSE key to play the DVD at nor-

mal speed again.

X1.5

B

31

TI

CHAP

TITLE

Play – DVD

32

Select the playback language

1.

On the remote control: Press the TA / AUDIO key repeatedly to select the language you want from the available options B.

Select subtitles

On the remote control: Press the AF / SUBTITLE key re-

1.

peatedly to select the language you want from the available subtitles B.

TI

m

000

E

00:00'52

01:05

DVD

german

00

german

CHAP

TITLE

AB

Repeat

Two repeat functions are available when playing DVDs: Chapter (C) and Title (T).

1. Press the REPEAT key on the remote control or the 4 / RPT key on the device.

The various options for the repeat function can be chosen by pressing the key repeatedly, and are displayed on the monitor C.

C

REPEAT

(repeat chapter) >

REPEAT

T

(repeat title) > (repeat off)

C

REPEAT

C

Play – DVD

Zoom

Various zoom factors for magnifying or reducing the screen display are available during play.

1. Press the PTY / ZOOM key on the remote control or the 3 / ZOOM key on the device to change the zoom factor.

The zoom factor changes as follows each time the PTY / ZOOM key is pressed: Normal > x1.5 > x2 > x3

Camera angle

You can select the camera perspective when playing DVDs that provide the multi-angle function.

1. On the remote control: Press the REG / ANGLE key.

✔ The camera angle is changed.

2. Press the REG / ANGLE key repeatedly to select from the available perspectives.

33

Play – CD

TEXT

TI

TRACK

34

Audio CD mode

Audio CD menu

A

TRACK

01

J

H

G

1. TRACK 1

2. TRACK 2

3. TRACK 3

4. TRACK 4

6. TRACK 6

TEXT

No Title

Audio-CD

A Track currently being played B Elapsed playing time C Play mode (normal, repeat, scan, mix) D Display of the play function (play, pause etc.) E Graphic equalizer display F Clock time G CD text information H Track list I Name of the CD, if CD text is available

TI

m

E

00:21'35

NORMAL

01:05

B C D

E F

Opening the audio CD menu

1. On the device or on the remote control: Press the SRC

key repeatedly until the audio CD menu is displayed.

Note: The system changes to CD mode automatically when an audio CD is inserted.

t01-02 48

Display with monitor retracted: Track, playing time, etc.

-

Play/pause

Audio CDs are automatically read and played when they are inserted.

1. On the device or on the remote control: Play can be interrupted and started again with the / PLAY/PAUSE key.

Track search (skip)

1. On the device or on the remote control: Press the /

key to skip to the beginning of the following or previous track.

TEXT

TI

TRACK

TEXT

TI

TRACK

Play – CD

Fast forward / reverse

1.

On the remote control: Press the / keys for fast forward or reverse.

2. By pressing the

/ keys repeatedly you can change the forward or reverse speed (by factors of 1.5, 2, 3 or 4). The chosen speed is displayed on the monitor A.

1. TRACK 1

2. TRACK 2

3. TRACK 3

4. TRACK 4

6. TRACK 6

TEXT

No Title

Audio-CD

TRACK

01

TI

m

E

00:21'35

NORMAL

01:05

x 2

A

3. Press the / PLAY/PAUSE key to play the audio CD again at normal speed.

Repeat

1. Press the REPEAT key on the remote control or the 4 / RPT key on the device.

✔ The repeat function is switched on, and displayed on the

monitor B.

TRACK

01

1. TRACK 1

2. TRACK 2

3. TRACK 3

4. TRACK 4

6. TRACK 6

TEXT

No Title

Audio-CD

t01-02 48

Repeat display with monitor retracted.

-

TI

m

E

00:21'35

REPEAT

01:05

B

RPT

2. Press the REPEAT key on the remote control or the 4 / RPT key on the device once more to switch the func-

tion off again.

✔ Display at the monitor:

NORMAL

.

35

TEXT

TI

TRACK

Play – CD

TI

TRACK

36

Random play

1. Press the MIX key on the remote control or the 5 / MIX key

on the device.

✔ The random play function is switched on, and displayed on

the monitor C.

TRACK

01

1. TRACK 1

2. TRACK 2

3. TRACK 3

4. TRACK 4

6. TRACK 6

TEXT

No Title

Audio-CD

t01-02 48

Random display with monitor retracted.

-

TI

m

E

00:21'35

MIX

01:05

C

RDM

2. Press the MIX key on the remote control or the 5 / MIX key on the device to switch the function off again.

✔ Display at the monitor:

NORMAL

.

Scan

This function plays a sample of about 15 seconds of each of the tracks on the CD in sequence.

1. Press the SCAN key on the remote control repeatedly or the 6 / SCAN key on the device.

✔ The scan function is started and displayed on the

monitor D.

1. TRACK 1

2. TRACK 2

3. TRACK 3

4. TRACK 4

5. TRACK 5

6. TRACK 6

CD-C

TRACK

01

CD 1

TI

m

E

00:00'35

SCAN

01:05

D

2. Press the SCAN key on the remote control or the 6 / SCAN key on the device once more to switch the func-

tion off again.

✔ Display at the monitor:

NORMAL

.

Play – CD changer

TI

TRACK

CD changer

A

TRACK

01

G

1. TRACK 1

2. TRACK 2

3. TRACK 3

4. TRACK 4

5. TRACK 5

6. TRACK 6

CD-C

A Track currently being played B Elapsed playing time C Play mode (normal, repeat, scan, mix) D Display the CD being played and the play mode E Graphic equalizer display F Clock time G Track list

CD 1

TI

m

E

00:00'35

NORMAL

01:05

B C D

E F

Open CD changer menu

1. On the device or on the remote control: Press the SRC

key repeatedly until the CD-C menu is displayed.

t01-02 48

Display with monitor retracted: Track, playing time, disk no. etc.

-

DISC

10

Play/pause

Play starts automatically as soon as the source is selected.

1. Press the / PLAY/PAUSE key on the device or on the remote control to stop play or to continue it.

37

TI

TRACK

TI

TRACK

Play – CD changer

38

Select CD

To select a CD,

1.

on the device: Press the 1 / -DISC or 2 / DISC+ key, or on the remote control: Press the / key.

1. TRACK 1

2. TRACK 2

3. TRACK 3

4. TRACK 4

5. TRACK 5

6. TRACK 6

CD-C

TRACK

01

CD 1

TI

m

E

00:00'35

NORMAL

01:05

Fast search

If you want to skip straight to a particular passage while playing a track, you can do this with the fast search function.

1. Press the / key on the remote control.

✔ The track is played forwards or backwards audibly A.

1. TRACK 1

2. TRACK 2

3. TRACK 3

4. TRACK 4

5. TRACK 5

6. TRACK 6

CD-C

TRACK

01

CD 1

TI

m

E

00:00'35

NORMAL

01:05

A

2. Press the / PLAY/PAUSE key to play the audio CD again at normal speed.

TI

TRACK

Play – CD changer

Select track (skip)

To skip to the next track

1. Press the

key on the device or on the remote control.

✔ If the last track has already been reached, pressing the

key again will select the CD’s first track.

Restart track

To repeat the current track or select a previous track

1. Press the key on the device or on the remote control. ✔ If the first track has already been reached, pressing the

key again will select the CD’s last track.

Repeat

Activate the repeat function to play a track or a CD repeatedly. The various options offered by the repeat function are displayed

on the monitor A.

REPEAT

(repeat track)

REPEAT

(repeat disc)

NORMAL

(repeat off).

1. Press the REPEAT key on the remote control or the 4 / RPT key on the device as often as necessary to acti-

vate the repeat function that you want or to switch it off.

TRACK

01

1. TRACK 1

2. TRACK 2

3. TRACK 3

4. TRACK 4

5. TRACK 5

6. TRACK 6

CD-C

t01-02 48

Repeat display with monitor retracted.

-

CD 1

TI

m

E

10

00:00'35

DISC

REPEAT

01:05

A

RPT

39

TI

TRACK

TI

TRACK

Play – CD changer

40

Random play

You can play the tracks from one CD or from all the CDs in the changer in a random order.

The various options offered by the random function are displayed on the monitor B.

MIX

Disc random (random play of the current disc)

MIX

Changer random (random play of all the discs)

NORMAL

Random off.

1. Press the MIX key on the remote control or the 5 / MIX key on the device as often as necessary to activate the mix function that you want or to switch it off.

1. TRACK 1

2. TRACK 2

3. TRACK 3

4. TRACK 4

5. TRACK 5

6. TRACK 6

CD-C

TRACK

01

CD 1

TI

m

E

00:00'35

MIX

01:05

B

Scan

You can listen to a sample of 15 seconds of all the tracks on a CD or of all the CDs in the changer.

The various options for the scan are displayed on the monitor C.

SCAN

Scan disc

SCAN

Scan magazine

NORMAL

Scan off.

1. Press the SCAN key on the remote control or the 6 / SCAN key on the device as often as necessary to acti-

vate the scan function that you want or to switch it off.

1. TRACK 1

2. TRACK 2

3. TRACK 3

4. TRACK 4

5. TRACK 5

6. TRACK 6

CD-C

TRACK

01

CD 1

TI

m

E

00:00'35

SCAN

01:05

C

t01-02 48

-

Random display with monitor retracted.

10

DISC

RDM

Play – MP3

ID3

TI

FILE

MP3

A

FILE

001

J

H

G

m

P3

m

P3

Kuschelrock

1. Abba - I have a

2. America _ The L

3. Art Garfunkel _

4. Austria 3 - Weu

5. B.O.N - Take my

ID3

I have a dream

CD-MP3

A Track currently being played B Elapsed playing time C Play mode (normal, repeat, scan, mix) D Display of the play function (play, pause etc.) E Graphic equalizer display F Clock time G ID3 tag Information H Track list with display of the file names I Name of the folder currently being played

TI

m

E

00:02'44

NORMAL

01:05

B C D

E F

Open MP3 menu

1.

On the device or on the remote control: Press the SRC key repeatedly until CD-MP3 is shown as the signal source.

Note: The system changes to CD-MP3 mode automatically when an MP3 disc is inserted.

The ID3 tag (interpret etc.) is only displayed at the bottom of the monitor.

MP3

Display with monitor retracted: Track, playing time, etc.

t01-02 48

-

1

Play/pause

Play starts automatically as soon as the source is selected.

1. On the device or on the remote control: Press the / PLAY/PAUSE key to stop or continue play.

Select directory

To change the directory

1. on the device: Press the 1 / -DISC or 2 / DISC+ key, or on the remote control: Press the / key.

41

ID3

TI

FILE

Play – MP3

42

Select MP3 file (skip)

To skip to the next file

1. Press the

key on the device or on the remote control.

✔ If the last track has already been reached, pressing the

key again will select the first MP3 file on the CD.

Note: Special characters in the names of files or folders will not be displayed correctly.

Restart MP3 file

To repeat the current MP3 file, or to select a previous file

1. Press the key on the device or on the remote control. ✔ If the first track has already been reached, pressing the

key again will select the CD’s last file.

Fast search

If you want to skip straight to a particular passage while playing a track, you can do this with the fast search function.

1. Press the / key on the remote control. ✔ The track is played forwards or backwards audibly. By pressing the keys repeatedly you can change the forward or

reverse speed (by factors of 2, 4, 6 or 8).

2. Press the

/ PLAY/PAUSE key to play the MP3 CD

again at normal speed.

Repeat

Activate the repeat function to play a track or a CD repeatedly. The various options offered by the repeat function are displayed

on the monitor A.

REPEAT

(repeat file)

REPEAT

(repeat folder)

NORMAL

(repeat off).

1. Press the REPEAT key on the remote control or the 4 / RPT key on the device as often as necessary to acti-

vate the repeat function that you want or to switch it off.

FILE

001

t01-02 48

MP3

m

P3

m

P3

Kuschelrock

1. Abba - I have a

2. America _ The L

3. Art Garfunkel _

4. Austria 3 - Weu

5. B.O.N - Take my

ID3

I have a dream

CD-MP3

Repeat display with monitor retracted.

-

TI

m

E

1

00:02'44

REPEAT

01:05

A

RPT

ID3

TI

FILE

ID3

TI

FILE

Play – MP3

Random play

You can play the MP3 files from one directory or from all the directories on the CD in a random order.

The various options offered by the random function are displayed on the monitor B.

MIX

(Random play from the current folder)

MIX

(Random play from all folders)

NORMAL

(Random play off)

1. Press the MIX key on the remote control or the 5 / MIX key on the device as often as necessary to activate the mix function that you want or to switch it off.

m

1. Abba - I have a

2. America _ The L

3. Art Garfunkel _

4. Austria 3 - Weu

5. B.O.N - Take my

ID3

I have a dream

P3

Kuschelrock

CD-MP3

FILE

001

TI

m

E

00:02'44

NORMAL

MIX

01:05

B

Scan

You can also listen to a sample of 15 seconds from each of the MP3 files in sequence.

The various options for the scan are displayed on the monitor C.

SCAN

(Sample the tracks in the folder)

SCAN

(Sample the disc)

NORMAL

(Normal playback).

1. Press the SCAN key on the remote control or the 6 / SCAN key on the device as often as necessary to acti-

vate the scan function that you want or to switch it off.

m

P3

m

P3

Kuschelrock

1. Abba - I have a

2. America _ The L

3. Art Garfunkel _

4. Austria 3 - Weu

5. B.O.N - Take my

ID3

I have a dream

CD-MP3

FILE

001

TI

m

E

00:02'44

SCAN

01:05

C

MP3

t01-02 48

-

Random display with monitor retracted.

1

RDM

43

Play – AUX/Navigation

44

Additional devices (AUX)

Three additional devices (such as the reversing camera) can be connected to the Chicago IVDM-7002, as well as the IVSC-3302 or IVSC-5502 converters. The AUX sources are activated in the setup menu. Please read the section “Select an External Signal Source” in the chapter on the “Setup Menu” to activate this function.

On the device or on the remote control: Press the SRC

1.

key as often as is needed for the source you want to be shown on the monitor.

✔ The chosen AUX source appears briefly on the monitor’s

top line.

AUX 1

Brief AUX display with retracted monitor, followed by display of the time.

Note: If an IVSC is connected it will be available as an additional signal source. All the connecting sources can then be displayed on the Chicago through the IVSC.

Navigation

A TravelPilot (e.g. the DX-V) can also be connected to the Chicago IVDM-7002 in addition to the AUX sources.

1. On the device or on the remote control: Press the NAVI key.

✔ The screen enters navigation mode.

2. Press the key again to return to the previous operating mode.

Note: The on-screen menu (OSD) is not available if the navigation system is connected via the RGB input.

Play – AUX/Navigation

Setting the speech output for navigation mode

The speech output signal from the TravelPilot enters the device through the AUX 3 audio input. The AUX 3 input is activated automatically when a spoken announcement is made.

Note: The AUX 3 input must be activated in the setup menu. Please read the section “Select an External Signal Source” in the chapter on the “Setup Menu”.

Proceed as follows to adjust the volume:

1. Press the SRC key to change to the AUX 3 input.

2. Set the volume that you want using the VOL - / + keys on

the Chicago IVDM-7002.

Note: If the range of adjustment is not enough you can also increase the volume of the TravelPilot itself. Read the TravelPilot’s operating instructions.

3. Leave the AUX 3 source by pressing the SRC key.

45

Setup Menu

SUB-TITLE

AUDIO

ENG

FRE

SPA

OTHERS

ENG

FRE

SPA

OTHERS

MENU

ENG

GER

FRE

ITA

SPA

46

Select the setup menu

1. Press the SETUP key on the remote control.

✔ The DVD setup menu appears.

Note: The DVD setup menu is always the first menu displayed when the setup menu is opened.

General settings

Language

E

D

A Selected sub-menu B Options C Help menu D Select sub-menu E Setup Menu

DVD

SUB-TITLE

ENTER SRC

AUDIO

MENU

ENG

FRE

SPA

OTHERS

ENG

FRE

SPA

OTHERS

RETURN

ITA

:BACK

SPA

:END: MENUE CHANGE

SETUP

ENG

GER

FRE

:SET

A

B

C

Select menu

Note: All the settings in the setup menu are made via the remote control.

1. You can make your way through the following setup men-

us by repeatedly pressing the SRC key: DVD > AUDIO > SCREEN > USER.

2. You select the sub-menu using the

/ keys.

3. Press the / RETURN key to return to the previous menu.

4. Press the SETUP key to leave the setup menu.

You will find more detailed information in the descriptions of the individual menus.

Setup Menu

SUB-TITLE

MENU

AUDIO

ENG

FRE

SPA

OTHERS

ENG

FRE

SPA

OTHERS

ENG

GER

FRE

ITA

SPA

DVD Setup

1. Press the SETUP key.

✔ The DVD setup menu appears.

Language

DVD

SUB-TITLE

ENTER SRC

1. Use the / keys to select the Language sub-menu, and press the ENTER key.

✔ The Language sub-menu appears.

2. By pressing the / keys you can select the “AUDIO”,

3. Set the option you want with the / keys.

“SUB-TITLE” or “MENU” (language of the menu texts) options.

4. Press the ENTER key to confirm the setting.

AUDIO

MENU

ENG

FRE

SPA

OTHERS

ENG

FRE

SPA

OTHERS

ENG

GER

FRE

:SET

RETURN

ITA

:BACK

SPA

SETUP

:END: MENUE CHANGE

Note: With the “OTHERS” option you can select one of the other languages that are listed in the DVD Language Code Table (see page 66). Enter the four-figure number for the desired language. This will only work if the language is supported by the DVD.

Display

DVD

VIDEO STD

ENTER SRC

WIDE 16:9WIDE 16:9 NARROW

ASPECT

PAN & SCAN LETTER BOX

TYPE

NTSCNTSC AUTOPAL

:SET

RETURN

:BACK

SETUP

:END: MENUE CHANGE

1. Use the / keys to select the Display sub-menu, and press the ENTER key.

✔ The Display sub-menu appears.

2. By pressing the / keys you can choose the “ASPECT” (screen proportions), “TYPE” (of display) or “VIDEO STD” (TV system) options.

47

Setup Menu

LEVEL

8.unrated

48

3. Set the option you want with the / keys.

4. Press the ENTER key to confirm the setting.

5. Repeat steps 1- 4 to make further settings.

Parental Control

DVD

LEVEL

:SET

ENTER SRC

8.unrated

RETURN

:BACK

SETUP

:END: MENUE CHANGE

1. Use the / keys to select the Parental Control submenu, and press the ENTER key.

✔ The Parental Control sub-menu appears.

2. By pressing the / keys you can adjust the level of pa- rental control to what you want.

The following protection levels are available:

●

General (G) – suitable for all ages (G)

●

Most audiences

●

Mature young audience (PG) – with parental supervision

●

Teenage audience (PG-13) – children under 13 with parental supervision

●

Mature teenage audience

●

Mature audience (R) – for children under 17 only with parental supervision

●

Adult audience (NC-17) – forbidden for children under 17

●

Unrated – no protection defined

Note: You need a password (see “Change password”) to modify the parental control level.

3. Confirm your selection with the ENTER key.

Note: Parental control is not supported by all DVDs.

Setup Menu

2V

1. Press the SETUP key, and then choose the AUDIO setup menu by repeatedly pressing the SRC key.

✔ The Input Level sub-menu appears.

Input sensitivity

Input Level

AUDIO

2. Use the / keys to set the input voltage.

3. Press the ENTER key to confirm the setting.

4. Repeat steps 1-3 to make further settings.

5. Press the / RETURN key to close the menu.

AUX1

AUX2

AUX3 2V2V4V

:SET

ENTER SRC

2V

4V

2V

:BACK

SETUP

:END: MENUE CHANGE

RETURN

Adjusting the ProLogic2 audio effect

Audio Effect Control

audio Effect Control

AUDIO

DownMIX Lt/Rt Stereo

ENTER SRC

OFF

Studio Hall Church

OFF

SFC

:SET

RETURN

:BACK

VSS

SETUP

:END: MENUE CHANGE

You are in the AUDIO setup menu.

1. Use the / keys to select the Audio Effect Control sub-menu, and press the ENTER key.

49

Setup Menu

Lt/Rt

Stereo

VSS

SFC

Studio

Hall

Church

OFF

ProLogic2

Music

OFF

✔ The “ProLogic2” option is highlighted.

Audio Effect Control

audio Effect Control

AUDIO

SFC

DownMIX

:SET

ENTER SRC

OFF

Lt/Rt

ProLogic2

Studio

Stereo

RETURN

Hall

:BACK

Music

VSS

Church

SETUP

:END: MENUE CHANGE

You can choose the following settings: OFF > Pro Logic > Music > Movie > Matrix.

2. Choose the setting you want with the / keys.

3. Confirm your selection with the ENTER key.

4. Press the / RETURN key to close the menu.

Adjusting the sound effects audio effect

You are in the AUDIO setup menu.

1. Use the / keys to select the Audio Effect Control sub-menu, and press the ENTER key.

✔ The “ProLogic2” option is highlighted.

2. Use the / keys to select the “SFC” (sound effects) option.

Audio Effect Control

audio Effect Control

AUDIO

DownMIX Lt/Rt Stereo

ENTER SRC

OFF

Studio Hall Church

OFF

SFC

:SET

RETURN

:BACK

VSS

SETUP

:END: MENUE CHANGE

You can choose the following settings: OFF > Studio > Hall > Church > Stadium > Movie > Club

3. Choose the setting you want with the / keys.

4. Confirm your selection with the ENTER key.

5. Press the / RETURN key to close the menu.

Setup Menu

Lt/Rt

Stereo

VSS

SFC

Studio

Hall

Church

OFF

ProLogic2

Music

OFF

Music is only played through the front loudspeakers when downmix is active.

You can switch the downmix mode on or off using the DOWNMIX key on the remote control.

You are in the AUDIO setup menu.

1. Use the / keys to select the Audio Effect Control sub-menu, and press the ENTER key.

✔ The “ProLogic2” option is highlighted.

2. Use the / keys to select the “DownMIX” option.

Audio Effect Control

audio Effect Control

AUDIO

SFC

DownMIX

:SET

ENTER SRC

OFF

Lt/Rt

ProLogic2

Studio

Stereo

RETURN

Hall

:BACK

Music

VSS

Church

SETUP

:END: MENUE CHANGE

You can make the following settings: Lt/Rt: Mix the surround-sound for the rear loudspeakers into

the signal for the front loudspeakers Stereo: Convert the surround-sound into a stereo signal VSS: Virtual surround-sound

3. Choose the setting you want with the

/ keys.

4. Confirm your selection with the ENTER key.

5. Press the / RETURN key to close the menu.

7-Band equalizer

7Band Equalizer

7Band equalizer

AUDIO

:SET

ENTER SRC

FLAT

RETURN

:BACK

SETUP

:END: MENUE CHANGE

51

Setup Menu

4001K1K

2.4K

12.5K

+6

-6

7EQ ITEM

52

You are in the AUDIO setup menu.

1. Use the

/ keys to select the 7-band equalizer sub-

menu, and press the ENTER key.

✔ The option menu for sound settings appears.

7Band Equalizer

7Band equalizer

AUDIO

7EQ ITEM

:SET

ENTER SRC

BALLAD

+6

O

-6

7575150

400

RETURN

:BACK

6K6K2.4K

12.5K

:END: MENUE CHANGE

SETUP

7 sound adjustments are available. Six are preset and one is a user-definable:

Flat > Classic > Jazz > Rock > Pop > Ballad > Dance > User

2. Press the / keys in order to select the sound adjust- ment you want, and press the ENTER key.

3. Now choose the frequency band you want with the / keys.

4. It is now possible to use the / keys to adjust to the level for the selected frequency (+6 /-6).

5. Press the ENTER key to complete the setting.

6. It is now possible to make further adjustments, or to leave the menu using the / RETURN key.

Loudspeakers

Here you can configure where loudspeakers are installed in the vehicle as well as set their size.

Speaker Setup

AUDIO

REAR

CENTER LARGE SMALL NONE

SUB WOOFER YES NO

:SET

ENTER SRC

LARGE SMALL

LARGE SMALL NONE

RETURN

:BACK

SETUP

:END: MENUE CHANGE

You are in the AUDIO setup menu.

1. Use the / keys to select the Speaker Setup submenu, and press the ENTER key.

✔ The “FRONT” option is highlighted.

2. Use the / keys to select from “FRONT”, “REAR”, “CENTER” or “SUBWOOFER”, and press the ENTER key.

Setup Menu

ting.

Note: The “NONE” option is missing from the settings available for the front loudspeakers, because front loudspeakers are fitted in all vehicles.

Note: The remaining audio signals are automatically set inactive (NONE or NO).

Delay

You can set the propagation time delay here for the centre and rear loudspeakers in milliseconds.

Speaker Delay

AUDIO

REAR

:SET

ENTER SRC

RETURN

:BACK

SETUP

+Oms

:END: MENUE CHANGE

You are in the AUDIO setup menu.

1. Use the / keys to select the Speaker Delay submenu, and press the ENTER key.

✔ The “CENTER” option is highlighted.

2. Use the / keys to select the “CENTER” or “REAR” option, and press the ENTER key.

3. Now set the desired delay with the / keys and press the ENTER key to confirm the setting.

53

Setup Menu

Volume level

You can adjust the output levels of the individual loudspeakers here.

Speaker Gain

AUDIO

FRONT R

REAR L

REAR R

:SET

ENTER SRC

RETURN

:BACK

SETUP

+0

You are in the AUDIO setup menu.

1. Use the / keys to select the Speaker Gain submenu, and press the ENTER key.

✔ The “FRONT L” (front left) option is highlighted.

2. Use the / keys to select from “FRONT L/R”, “REAR L/R”, “CENTER” or “SUBWOOFER”, and press the

ENTER key.

3. Use the

/ keys to raise or lower the loudspeaker level for the chosen loudspeaker, and press the ENTER key to confirm the settings.

Dynamic range

Note: The dynamic range can be raised or lowered in the following steps: OFF, 1/8, 2/8, 3/8, 4/8, 5/8, 6/8, 7/8, FULL.

Dynamic Range

AUDIO

:SET

ENTER SRC

RETURN

:BACK

SETUP

OFF

:END: MENUE CHANGE

You are in the AUDIO setup menu.

1. Use the / keys to select the Dynamic Range submenu, and press the ENTER key.

✔ The “D.RANGE” option is highlighted.

2. Use the / keys to raise (+) or lower (-) the range, and press the ENTER key to confirm the settings.

Setup Menu

POSITION

BACKWARD

FORWARD

OPEN/CLOSE

Automatic

Manual

TILT-2-2-1-1

+2

Test tone

You can send a test tone here to the connected loudspeakers in order to check that they are operating properly.

Test T one

AUDIO

CENTER

REAR L REAR R

SUB WOOFER

:SET

ENTER SRC

RETURN

:BACK

SETUP

:END: MENUE CHANGE

You are in the AUDIO setup menu.

1. Use the / keys to select the Test Tone sub-menu, and press the ENTER key.

✔ The “FRONT L” (front left) option is highlighted.

2. Use the / keys to select the desired loudspeaker, and press the ENTER key.

✔ A test tone will now be output for about 3 seconds through

3. Repeat these steps for the other loudspeakers.

the chosen loudspeaker.

Monitor setup

1. Press the SETUP key, and then choose the SCREEN set- up menu by repeatedly pressing the SRC key.

✔ The SCREEN setup menu appears.

Tilt

SCREEN

Monitor tilt

Here you can adjust the tilt that you want as well as the distance of the monitor and whether the monitor should be retracted (automatic) or not (manual) when the ignition is turned off.

You are in the SCREEN setup menu.

1. Use the / keys to select the Tilt sub-menu, and press the ENTER key.

✔ The “TILT” option is highlighted.

2. Use the / keys to select the “TILT” (monitor tilt), “POSITION” or “OPEN/CLOSE” option that you want and then press the ENTER key.

TILT

POSITION

OPEN/CLOSE

:SET

ENTER SRC

BACKWARD

Automatic

0 +1+1+2

+1+1+2

FORWARD

Manual

RETURN

:BACK

SETUP

:END: MENUE CHANGE

55

Setup Menu

Dimmer

AUTO

Tint

Contrast

Color

Brightness

56

3. Choose the setting you want with the / keys.

4. Press the ENTER key to confirm the setting.

Note: A TILT of -2 cannot be selected if the device is in the “BACKWARD” position.

Screen settings

In this menu you can adjust the monitor’s display to what you find most pleasing.

Control

SCREEN

You are in the SCREEN setup menu.

1. Use the press the ENTER key.

Brightness

Color

Contrast

Tint

Dimmer

:SET

ENTER SRC

AUTO

1 2 3 4AUTO

RETURN

:BACK

SETUP

+0--

:END: MENUE CHANGE

/ keys to select the Control sub-menu, and

✔ The “Brightness” option is highlighted.

2. Use the

/ keys to choose the option you want from “Brightness”, “Color”, “Contrast”, “Tint” or “Dimmer”, and press the ENTER key.

3. Make the adjustments using the / keys, and confirm by pressing the ENTER key.

User setup

1. Press the SETUP key, and then choose the USER setup menu

by repeatedly pressing the SRC key.

✔ The USER setup menu appears.

ID Code

USER

OLD CODE

NEW CODE

RE-CODE

:SET

ENTER SRC

RETURN

:BACK

SETUP

:END: MENUE CHANGE

Setup Menu

Change password

This is where you can change the password (the factory default setting is 0000). The device asks you to enter the password if, for instance, you want to play DVDs that have been protected by the Parental Control function.

ID Code

USER

OLD CODE

NEW CODE

RE-CODE

:SET

ENTER SRC

RETURN

:BACK

SETUP

:END: MENUE CHANGE

1. Use the / keys to select the ID Code sub-menu, and press the ENTER key.

✔ The “OLD CODE” option for the old password is highlight-

ed.

2. To change the password, you must first enter the old password into the “OLD CODE” field.

3. You then enter the new password into the “NEW CODE” field, and repeat it in the “RE-CODE” field.

Image management

The Chicago IVDM-7002 allows you to display different background images. You can also load your own pictures into the device from a CD ROM and choose these for the background. You can also choose to have the same image displayed always, or for the stored images to be displayed in an automatic cycle.

Image Manager

USER

PREVIEW IMG2 IMG3 IMG4

IMG SWING

ENTER SRC

IMG1IMG1

ON OFF

:SET

RETURN

:BACK

SETUP

:END: MENUE CHANGE

57

Setup Menu

IMAGE1

RETURN

WALLPAPER

CLEAR

58

Select background image

Background images can be for play from the radio, MP3, audio CD and CD changer.

1. Use the / keys to select the Image Manager submenu, and press the ENTER key.

✔ The “PREVIEW” option is highlighted.

2. Press the ENTER button again.

✔ Preview mode is activated.

WALLPAPER

IMAGE1

RETURN

CLEAR

3. Choose the background image you want with the / keys.

Note: The “IMG SWING” option should be switched off during this procedure.

4. Use the / keys to highlight the “WALLPAPER” option and press the ENTER key.

✔ The chosen image is displayed as the background.

It is also possible to change the background image for the active audio source directly.

1. Press the DISP / WALLPAPER key as often as necessary to bring the desired image into view.

Automatic change

If automatic change is switched on, the background image changes with each track that is played from the audio or MP3 CD. The background changes every 5 minutes when the radio is playing.

Image Manager

USER

PREVIEW IMG2 IMG3 IMG4

IMG SWING

ENTER SRC

IMG1IMG1

ON OFF

:SET

RETURN

:BACK

SETUP

:END: MENUE CHANGE

1. Use the / keys to select the “IMG SWING” (image cycle) option.

2. Use the

/ keys to highlight “ON” or “OFF” to switch

the automatic image cycle on or off.

3. Press the ENTER key to close the menu.

Setup Menu

IMAGE1

RETURN

WALLPAPER

CLEAR

Delete images

WALLPAPER

IMAGE1

RETURN

CLEAR

To delete stored images

1. Select the “CLEAR” option in preview mode, and press the ENTER key.

✔ A dialog box opens, asking you for confirmation.

2. Use the / keys to highlight “YES” or “NO” in order to delete or retain the selected image.

Note: After confirming the deletion the image is removed, and the monitor displays a black window. Images that have been removed are not shown in the image cycle.

Load background image

You can also load your own background images into the device from a CD ROM.

The software required for loading your own images is available for download from our website at www.blaupunkt.de.

The images are automatically loaded into the device after inserting the CD ROM.

Image Download

Image Manager

IMAGE 1

IMAGE 4

IMAGE 7

or download a new image from your CD-ROM. After you select the image file you would like to edit (1-7). Highlight file and press ENTER. Choose "clear" to delete stored image. Choose "Update" to download new image from CD-ROM. Press "Setup" to exit when complete.

:SET

ENTER SETUP

IMAGE 2

IMAGE 5

From this menu you can delete a currently stred image,

:END

IMAGE 3

IMAGE 6

1. Create the download CD in accordance with the program instructions. Use a CD-R as a blank.

2. Insert the CD that you have burnt into the device.

✔ The download menu will appear after a short delay.

3. Use the / or / keys to select the desired memory location, and press the ENTER key.

✔ The contents of the chosen memory location are dis-

played.

59

Setup Menu

IMA

GE LIST IN CD-ROMOM

60

You can now take the following actions:

1. Choose the “CLEAR” option. ✔ The image will be deleted after a security confirmation. or

1. Choose the “UPDATE” option to replace the chosen image with a new one.

IMA

GE LIST IN CD-R

:END

SETUP

: Preview & Store

ENTER

IMAGE_1.jpg IMAGE_2.jpg IMAGE_3.jpg

IMAGE_4.bmp

✔ A menu displaying the images stored on the CD ROM ap-

pears.

2. Choose the image you want, and press the ENTER key.

✔ The image is displayed on the monitor.

STORE

RETURN

File-003

RETURN

3. Choose the “STORE” option to load the image.

✔ The image is stored following a security confirmation

question.

or

3. Select the “RETURN” option to go back to the selection menu.

✔ The Download menu appears.

4. Press the SETUP key to close the menu.

✔ The download CD is ejected.

Setup Menu

29

2003

Set the date and time

Adjust Date & Time

USER

YEAR

MONTH

DAY

Style

:SET

ENTER SRC

2003

29

7

29

24H Style

RETURN

:BACK

SETUP

You are in the USER setup menu.

1. Use the / keys to select the Adjust Date & Time submenu, and press the ENTER key.

✔ The “YEAR” option is highlighted.

2. Make the setting with the / keys.

3. Repeat these steps for the other settings, and finally press the ENTER key.

Select external signal source

You can activate or deactivate the AUX sources in this menu, and you can specify the inputs to which particular additional devices (navigation unit, reversing camera) are connected.

You can make the following settings: The connection of a navigation device (NAVI)

NONE, RGB, AUX 1, AUX 2, AUX 3 The connection of the reversing camera (CAMERA)

NONE, RGB, AUX 1, AUX 2, AUX Reversing the camera image when driving backwards (REVERSE)

ON, OFF The connection of additional audio/video sources

AUX 1: ON, OFF AUX 2: ON, OFF AUX 3: ON, OFF

The connection of additional monitors Monitor 1: AUTO, DISC, RADIO, CDC, AUX 1, AUX 2, AUX 3 Monitor 2: AUTO, DISC, RADIO, CDC, AUX 1, AUX 2, AUX 3

61

Setup Menu

OFF

REVERSE

OFF

CAMERA

NONE

NAVI

RGB

62

External Source Setup

USER

NAVI

CAMERA

REVERSE

AUX1

ENTER SRC

NONE

RGB

AUX1 AUX2 AUX3

NONE

AUX1 AUX2 AUX3

ON

OFF

ON

OFF

RETURN

:BACK

SETUP

:END: MENUE CHANGE

You are in the USER setup menu.

1. Use the

/ keys to select the External Source Setup

sub-menu, and press the ENTER key.

✔ The “NAVI” option is highlighted.

2. Choose the option you want with the / keys.

3. Make the adjustments using the / keys, and confirm by pressing the ENTER key.

4. Make other settings if necessary.

5. Leave the menu by pressing the / RETURN key.

Factory settings

Protected Configuration

USER

Reset Load Default ConfigLoad Default Config

:SET

ENTER SRC

RETURN

:BACK

SETUP

:END: MENUE CHANGE

You are in the USER setup menu.

1. Use the / keys to select the Protected Configuration sub-menu (factory settings), and press the ENTER key.

✔ The password check appears.

2. To reset the device you must now enter the password and confirm with the ENTER key.

✔ All the settings that you have made (with the exception of

the password, date and time) are reset to their factory values.

Setup Menu

Restarting the device software

If, because of some fault, the Chicago IVDM-7002 locks up, or if some of its functions can no longer be operated, it is possible to restart the device software by pressing the reset button using the tip of a ballpoint pen. The reset button is located behind the removable control panel. If the problem persists, please contact your dealer.

63

Glossary

Downmix

The downmix function allows you to create a stereo signal from a Dolby Prologic signal. This can then be distributed to the four loudspeakers.

Dolby Digital

The Dolby Digital multi-channel technology uses up to six channels, and therefore gives a convincing impression of spatial depth and a high sense of reality. This is provided by separate channels for the left, right and centre loudspeakers in the front of the vehicle, along with two full-range surround loudspeakers in the back of the vehicle as well as a subwoofer.

DVD video

DVD video is a software standard specified by the DVD Forum specifically for video signals. An application layer is also necessary for DVD. This specifies standards for such things as the playback speed, forward/ reverse play, interactivity, up to eight audio tracks with up to eight channels, and adjustment of camera angles.

MP3

MP3 stands for MPEG-1 Audio Layer 3, and is a data format in which music can be compressed and stored digitally. Due to its ability to combine high quality with small file sizes as well as its platform-independence, the MP3 format has now become the leading format for compressed audio.

64

Specifications

Control Panel / Monitor

System: NTSC/PAL auto switch Power supply: 10.8 - 16.0 volts Maximum current consumption: 5 A Standby: 7.3 mA Operating temperature: -20° C - +70° C Storage temperature: -30° C - +80° C Screen size (diagonal): 7" (17.5 cm) Resolution (pixels): 1440 (H) x 234 (W) =

336,960 pixels Visible screen area: 152 (W) x 86 (H) mm Control panel dimensions (WxHxD): 180 x 50 x 26.7 mm

Amplifier

Dimensions (WxHxD): 175 x 50 x 235 mm Power supply 10.8 - 16.0 volts Maximum current consumption: 10 A Standby: 10 mA Video input level (typical): 1 Vpp, 75 ohms Audio output level (typical): 4 Vrms +/- 0.2 Vrms Channel separation: < 55 dB Signal/noise ratio: < 75 dB Bandwidth: 20 Hz - 20 kHz +/- 2 dB Channel matching: > 0.5 dB Harmonic distortion factor (RMS): < 0.05 %

Output power: 4 x 16 watts sine according

to DIN 45 324 at 14.4 V 4 x 45 watts max. power

Centre loudspeaker: 1 x 12 watts sine according

to DIN 45 324 at 14.4 V 1 x 25 watts max. power

AUX 1, 2, 3

Signal/noise ratio: > 85 dB Harmonic distortion factor: < 0.01 % Loudspeaker bandwidth: 20 Hz - 20 kHz +/- 2 dB Bandwidth (subwoofer): -3 dB at 100 Hz +/- 2 dB

DVD, CD, CDC

Signal/noise ratio: > 95 dB Harmonic distortion factor: < 0.01 % Bandwidth: 20 Hz - 20 kHz +/- 2 dB

Tuner

Wavebands FM: 87.5 - 108 MHz MW: 531 - 1,602 kHz

FM frequency response: 20 - 16,000 Hz

Subject to technical changes!

65

DVD Language Code Table

66

6566 Abkhazian 6565 Afar 6570 Afrikaans 8381 Albanian 6577 Amharic 6582 Arabic 7289 Armenian 6583 Assamese 6569 Avestan 6588 Aymara 6590 Azerbaijani 6665 Bashkir 6985 Basque 6669 Belarusian 6678 Bengali 6672 Bihari 6673 Bislama 6683 Bosnian 6682 Breton 6671 Bulgarian 7789 Burmese 6765 Catalan 6772 Chamorro 6769 Chechen 7889 Chichewa 9072 Chinese 6785 Church Slavic 6786 Chuvash

7587 Cornish 6779 Corsican 7282 Croatian 8372 Croatian 6783 Czech 6865 Danish 7876 Dutch 6890 Dzongkha 6978 English 6979 Esperanto 6984 Estonian 7079 Faroese 7074 Fijian 7073 Finnish 7082 French 7089 Frisian 7168 Gaelic 7176 Gallegan 7565 Georgian 6869 German 6976 Greek 7178 Guarani 7185 Gujarati 7265 Hausa 7387 Hebrew 7290 Herero 7273 Hindi 7279 Hiri Motu

7285 Hungarian 7383 Icelandic 7378 Indonesian 7365 Interlingua 7369 Interlingue 7385 Inuktitut 7375 Inupiaq 7165 Irish 7384 Italian 7465 Japanese 7487 Javanese 7576 Kalaallisut 7578 Kannada 7583 Kashmiri 7575 Kazakh 7577 Khmer 7573 Kikuyu 8287 Kinyarwanda 7589 Kirghiz 7586 Komi 7579 Korean 7574 Kuanyama 7585 Kurdish 7679 Lao 7665 Latin 7686 Latvian 7666 Letzeburgesch 7678 Lingala

7684 Lithuanian 7775 Macedonian 7771 Malagasy 7783 Malay 7776 Malayalam 7784 Maltese 7186 Manx 7773 Maori 7782 Marathi 7772 Marshall 7779 Moldavian 7778 Mongolian 7865 Nauru 7886 Navajo 7868 Ndebele, North 7882 Ndebele, South 7871 Ndonga 7869 Nepali 8369 Northern Sami 7879 Norwegian 7866 Norwegian

Bokmål

7878 Norwegian

Nynorsk 7967 Occitan 7982 Oriya 7977 Oromo 7983 Ossetian

8073 Pali 8065 Panjabi 7065 Persian 8076 Polish 8084 Portuguese 8083 Pushto 8185 Quechua 8277 Raeto-Romance 8279 Romanian 8278 Rundi 8285 Russian 8377 Samoan 8371 Sango 8365 Sanskrit 8367 Sardinian 8382 Serbian 8378 Shona 8368 Sindhi 8373 Sinhalese 8375 Slovak 8376 Slovenian 8379 Somali 8384 Sotho, Southern 6983 Spanish 8385 Sundanese 8387 Swahili 8383 Swati 8386 Swedish

8476 Tagalog 8489 Tahitian 8471 Tajik 8465 Tamil 8484 Tatar 8469 Telugu 8472 Thai 6679 Tibetan 8473 Tigrinya 8479 Tonga 8483 Tsonga 8478 Tswana 8482 Turkish 8475 Turkmen 8487 Twi 8571 Uighur 8575 Ukrainian 8582 Urdu 8590 Uzbek 8673 Vietnamese 8679 Volapumk 6789 Welsh 8779 Wolof 8872 Xhosa 7437 Yiddish 8979 Yoruba 9065 Zhuang 9085 Zulu

Country: Phone: Fax: www:

Germany (D) 0180-5000225 05121-49 4002 http://www.blaupunkt.com Austria (A) 01-610 39 0 01-610 39 391 Belgium (B) 02-525 5444 02-525 5263 Denmark (DK) 44 898 360 44-898 644 Finland (FIN) 09-435 991 09-435 99236 France (F) 01-4010 7007 01-4010 7320 Great Britain (GB) 01-89583 8880 01-89583 8394 Greece (GR) 210 94 27 337 210 94 12 711 Ireland (IRL) 01-4149400 01-4598830 Italy (I) 02-369 62331 02-369 62464 Luxembourg (L) 40 4078 40 2085 Netherlands (NL) 023-565 6348 023-565 6331 Norway (N) 66-817 000 66-817 157 Portugal (P) 01-2185 00144 01-2185 11111 Spain (E) 902-120234 916-467952 Sweden (S) 08-7501500 08-7501810 Switzerland (CH) 01-8471644 01-8471650 Czech. Rep. (CZ) 02-6130 0441 02-6130 0514 Hungary (H) 01-333 9575 01-324 8756 Poland (PL) 0800-118922 022-8771260 Turkey (TR) 0212-3350677 0212-3460040

Blaupunkt GmbH

07/04 CM/PSS (GB) 8 622 404 067 Index B

/

Blaupunkt CHICAGO IVDM-7002 EU, CHICAGO IVDM-7002 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual