Blaupunkt BGx 2402 N, BGx 2652 N, BGx 2693 N, BGx 2652 C installation instructions
POWER SPEAKERS
BGx 2xxx SERIES
BGx 2402 N
BGx 2693 N BGx 2652 C
BGx 2652 N
Enjoy it.
Operating and installation instructions
INTRODUCTION
Proper system planning is vital in order to
maximize the device’s performance and road
safety. Plan your installation carefully to avoid
compromising performance reliability of the
system. Consult an authorized Blaupunkt delaler
for installation or reparation. Read the manual
carefully before operating the device for the
rst time.
Safety Notes
Ensure to follow below safety notes during
installation and wiring connection: -
•
Disconnect the negative terminal of the
battery. Refer to the safety notes of the vehicle
manufacturer.
•
Ensure positions of the holes are nowhere
near the vehicle component to avoid any
damage during drilling.
•
Ensure cross section of the cable is no less
than 2.5mm if the positive and negative
cables are too long.
•
Incorrect installation may result in malfunction of the device or the car sound system.
Installation and Connection Instructions
•
Select a dry and well-ventilated location to
install the device.
•
The device must not be installed in overly
exposed location such on the rear shelf, rear
seat etc.
•
The installation location must be suitable for
screw holes and have stable ground support.
Voltage Supply
•
Use the supplied power extension cable to
connect to the positive battery terminal.
•
Firmly and carefully connect the ground lead
to a bare metal point on the vehicle chassis.
•
The control of the device should be a
two-channel control, either via the preamplier output of the car sound system. A control
solely via the right or left channel is also possible since the low-frequency portion of the
music is generally identical on both channels.
Disclaimer
In no event shall Blaupunkt be liable for any
direct, indirect, punitive, incidental, special
consequential damages to property or life and
whatsoever arising out of or connected with the
use or misuse of our products.
USA & CANADA: This product is not intended
for sale in the United States and Canada. If
purchased in the U.S. or Canada, this product is
purchased on as-is basis. No warranty, whether
expressed or implied is provided in the U.S. or
Canada.
Recycling and Disposal
This manual may be updated from time to time
without any notice.
1
Do not dispose your old unit in
the household trash!
Use the return and collection
items available to dispose of the
old device.
SPECIFICATION
BGx 2402 N
Pair of 4.0” 2-way coaxial speakers with injected cone including mounting hardware
•
Max. Power Handling : 70W
•
Normal Output Power (RMS) : 20W
•
Impedence : 4ohms
•
Frequency Response : 100-20,000Hz
•
Sensitivity : 86dB
•
Mounting Depth : 46mm
•
Mounting Hole Diameter : 95mm
•
Surround : Rubber Edge
60mm
45.5mm
Accessories
63mm
70mm
95mm
9
5
m
m
4.5mm
116mm
130.69mm
Screws (4x25mm) x8 Cable Clip x8 1.8m Wire
2
Loading...