Page 1
AP 3.0 AIRPURE
Clean AIR | Plug & Play
Blaupunkt India Private Limited
47, Atlanta Society, Nariman Point, Mumbai‐ 400 021. Maharashtra. India.
Toll Free: 1800 209 6820 | info@blaupunktcar.in | www.blaupunktcar.com
Page 2
AP 3.0 AIRPURE
AP 3.0 AIRPURE
Structure:
Spiral Outlet
Air Monitoring Sensor
Power Supply Port
Air Inlet
AP 3.0 AIRPURE
ON / OFF Button
Status Indicator
Air Quality Indicator
Internal
Ion Generator
Air Quality Sensor
Turbo Blower
TVOC Sensor
Inside - HEPA11 Filter
Standby Red indicator
Connect device to USB outlet. Device goes into auto detect mode
and cycles between Red / Amber / Blue while the air sensor
checks for air quality.
Laptop
Power Bank
PC
USB port
Adaptor Cigarette lighter
to vehicle
Bottom Cover
Fan Speed Indicator
The Power Supply Indicator Is On
Once the device is turned ON, the Ultraviolet,
Ionizer sections are also turned ON, the green
symbol on the top display section turns ON to
indicate it’s in Virus / Bacteria killing mode
(purifying).
Power ON / OFF Indicator
Touch Control
(Power ON / OFF indicator
& Fan speed control)
Filter Replacement Indicator
Page 3
AP 3.0 AIRPUREAP 3.0 AIRPURE
AP 3.0 AIRPURE
AP 3.0 AIRPURE
AP 3.0 AIRPURE
Power ON / OFF indicator
To turn ON device, touch the ON / OFF button once and the
device will commence purifying the air in its immediate
surrounding area based on the input from the sensor
located on the side of the device.
3-5 minutes post turning on the device and based on the sensor input the visual indicator
shows air quality in the cabin / room.
Blue light indicates
good air quality
Amber light indicates
some harmful gases or
particles have been
detected
Red light indicates
hazardous gases or
particles have been
detected
Filter replacement
Aroma / Fragrance:
This device comes equipped with a compressed ceramic insert that can be accessed when
the bottom cover is opened. Pour some of your favorite fragrance (2-3 drops at a time) on
this ceramic insert and place it back in it's original position. Once the bottom cover is sealed
and the device turned ON, this fragrance is transferred to the cabin through the natural air
ow of the device. .
Product datasheet:
Product dimensions: 71mmx182mm
Ions release: 5 million
Input voltage: 5V1A
Power: <5w
Noise <28dB
Net weight: 422g
Air quality sensor: TVOC
Fan Type: Double Inlet DC turbo
Filter: Rough lter + HEPA11
Filter Type: H11
For space: 10 m3
Case material: Anodized Aluminum Alloy
Specications:
Purication Method: Primary lter + HEPA11 + Activated carbon lter + plasma
5million / cm + UV light
Indicator Display: Filter Replacement Reminder, Auto / Manual Fan Speed
On/OFF: On/OFF Touch Control
Air Quality Testing : TVOC sensor detection
CADR: 7.3m/h
Maximum Air Volume: 24m/h
3
3
Variable Fan Speed : Max 5500r/min
Noise: <30dB
Rated Voltage: DC 5V1A
Rated Power: <5W
Applicable Space: Up to 10m
Working Environment: -10°C~+50°C
External Material: A nodised Aviation Grade Al uminum
Accessories Included: USB Power Cable
3
3
Unscrew the bottom cover
counterclockwise & open
Remove old lter and
replace with new lter
Screw on the bottom
cover tightly
Cautions
Please read user manual before use:
ŸDo not expose the device to rain or moisture
ŸIf device is not going to be used for an extended period of time, please turn OFF device
ŸShould the device need to be serviced, please approach an Authorized Service Center
Loading...