Blaupunkt AP 3.0 User Manual

AP 3.0 AIRPURE
Clean AIR | Plug & Play
Blaupunkt India Private Limited 47, Atlanta Society, Nariman Point, Mumbai‐ 400 021. Maharashtra. India. Toll Free: 1800 209 6820 | info@blaupunktcar.in | www.blaupunktcar.com
AP 3.0 AIRPURE
AP 3.0 AIRPURE
Structure:
Spiral Outlet
Air Monitoring Sensor
Power Supply Port
Air Inlet
AP 3.0 AIRPURE
ON / OFF Button Status Indicator
Air Quality Indicator
Internal Ion Generator Air Quality Sensor
Turbo Blower TVOC Sensor
Inside - HEPA11 Filter
Standby Red indicator
Connect device to USB outlet. Device goes into auto detect mode and cycles between Red / Amber / Blue while the air sensor checks for air quality.
Laptop
Power Bank
PC
USB port
Adaptor Cigarette lighter
to vehicle
Bottom Cover
Fan Speed Indicator
Once the device is turned ON, the Ultraviolet, Ionizer sections are also turned ON, the green symbol on the top display section turns ON to indicate it’s in Virus / Bacteria killing mode (purifying).
Power ON / OFF Indicator
Touch Control (Power ON / OFF indicator & Fan speed control)
Filter Replacement Indicator
AP 3.0 AIRPURE AP 3.0 AIRPURE
AP 3.0 AIRPURE
AP 3.0 AIRPURE
AP 3.0 AIRPURE
Power ON / OFF indicator
To turn ON device, touch the ON / OFF button once and the device will commence purifying the air in its immediate surrounding area based on the input from the sensor located on the side of the device.
3-5 minutes post turning on the device and based on the sensor input the visual indicator shows air quality in the cabin / room.
Blue light indicates
good air quality
Amber light indicates
some harmful gases or
particles have been
detected
Red light indicates
hazardous gases or
particles have been
detected
Filter replacement
Aroma / Fragrance:
This device comes equipped with a compressed ceramic insert that can be accessed when the bottom cover is opened. Pour some of your favorite fragrance (2-3 drops at a time) on this ceramic insert and place it back in it's original position. Once the bottom cover is sealed and the device turned ON, this fragrance is transferred to the cabin through the natural air ow of the device. .
Product datasheet:
Product dimensions: 71mmx182mm Ions release: 5 million Input voltage: 5V1A Power: <5w Noise <28dB Net weight: 422g Air quality sensor: TVOC Fan Type: Double Inlet DC turbo Filter: Rough lter + HEPA11 Filter Type: H11 For space: 10 m3 Case material: Anodized Aluminum Alloy
Specications:
Purication Method: Primary lter + HEPA11 + Activated carbon lter + plasma
5million / cm + UV light Indicator Display: Filter Replacement Reminder, Auto / Manual Fan Speed On/OFF: On/OFF Touch Control Air Quality Testing : TVOC sensor detection CADR: 7.3m /h Maximum Air Volume: 24m /h
3
3
Variable Fan Speed : Max 5500r/min Noise: <30dB Rated Voltage: DC 5V1A Rated Power: <5W Applicable Space: Up to 10m Working Environment: -10°C~+50°C External Material: A nodised Aviation Grade Al uminum Accessories Included: USB Power Cable
3
3
Unscrew the bottom cover
counterclockwise & open
Remove old lter and
replace with new lter
Screw on the bottom
cover tightly
Cautions
Please read user manual before use:
Ÿ Do not expose the device to rain or moisture Ÿ If device is not going to be used for an extended period of time, please turn OFF device Ÿ Should the device need to be serviced, please approach an Authorized Service Center
Loading...