Black & Decker LCM82 User Manual

Coffee Maker

First Use Safety Recommendation

Please read through this booklet for safe and efficient use of the appliance. We urge you to read the "Hint's" section and also follow all detailed instructions even if you are familiar with using this appliance.

Keep this guide handy for future reference.

English Page 02 Farsi Page 13 Arabic Page 19

LCM82

English

IMPORTANT SAFEGUARDS

While using electrical appliances, in order to reduce the risk of fire, electric shock, and/or injury to persons, basic safety precautions should be followed, including the following:

• Read all instructions carefully, even if you are familiar with the appliance.

• To protect against the risk of electric shock, DO NOT IMMERSE the appliance,

cord set or plug in water or other liquids.

• To clean, wipe the exterior with a damp cloth.

• Close supervision is necessary when any appliance is used near children. Never leave an appliance unattended when in use.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

• Switch off and remove the plug from the power outlet when not in use before assembling or disassembling parts, cleaning or carrying out any maintenance of assembling or disassembling parts, cleaning out any maintenance of the appliance. Never pull the cord while unplugging out from power outlet.

• Do not operate any appliance with a damaged in any manner. Return the complete appliance to your nearest authorized service facility for examination, electrical repair, mechanical repair or adjustments to avoid any hazard.

• The use of attachments or accessories not recommended or sold by this appliance manufacturer may result in fire, electric shock or personal injury.

• Do not let the cord hang over the edge of a table, counter, or touch hot surfaces.

• Avoid touching hot surfaces, use handles and knobs.

• Do not operate or place any part of this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven).

• Do not abuse the cord. Never carry the appliance by the cord or yank it to disconnect it from the outlet; instead, grasp the plug and pull to disconnect.

• When using an extension cord with your appliance, make sure the extension cord is correctly wired, and rated for its use.

• This product is intended for household use only.

• Do not attempt to repair the appliance yourself; instead, take it to your Black & Decker-owned or Authorized Service Centre for repair.

SAVE THESE INSTRUCTIONS

-2-

English

Parts Identification

1. Power Switch

2. Base

3. Water tank

4. Water tank cover

5. Filter cover

6. Filter holder

7. Glass jug

8. Indicator light

9. Filter

10. Heating plate

-3-

English

Intended use

Your Black & Decker Blender has been designed for making filter coffee as described in this manual. This appliance is intended for indoor consumer use only.

Safety Instructions

• Warning! When using mains-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage.

• Read all of this manual carefully before using the appliance.

• The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.

• Retain this manual for future reference.

• Always route the cord carefully to avoid a tripping hazard.

• Never operate an appliance directly below the socket-outlet it is connected to.

Using your appliance

• Make sure that the appliance is switched off before connecting to

or disconnecting from the power supply.

• Always take care when using the appliance.

• Do not use the appliance outdoors.

• Never pull the power supply cord to disconnect the plug from the socket. Keep the power

supply cord away from heat, oil and sharp edges.

• Disconnect the appliance from the power supply when not in use, before fitting or removing

parts, maintenance and before cleaning.

• Surfaces may be hot during use and during the cool down period

• Do not operate or place any part of this appliance on or near any hot surface, such as a gas

or electric burner or in a heated oven.

• When using an extension cord with your appliance, make sure the extension cord is correctly

wired & rated for its use.

Safety of others

• Do not allow children or any person unfamiliar with these instructions to use the appliance.

• Do not allow children or animals to come near the work area or to touch the appliance or

power supply cord. Close supervision is necessary when the appliance is used near children.

• Never leave an appliance unattended when in use

• Do not allow the cord set to hang over bench tops

Denotes hot

surface

Denotes hot surface

This product must be earthed. Always check that the power supply corresponds to the voltage on the rating plate.

Extension cables & class 1 product

A 3 core cable must be used as your tool is earthed and of class 1 construction.

-4-

English

• This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children must be supervised to ensure that they do not play with the appliance.

After use

• Switch off and remove the plug from the socket before leaving the appliance unattended

and before changing, cleaning or inspecting any parts of the appliance.

• When not in use, the appliance should be stored in a dry place. Children should not have

access to stored appliances.

Inspection and repairs

• Before use, check the appliance for damaged or defective parts. Check for breakage of

parts, damage to switches and any other conditions that may affect its operation.

• Do not use the appliance if any part is damaged or defective.

• Have any damaged or defective parts repaired or replaced by an authorised repair agent.

• Before use, check the power supply cord for signs of damage, ageing and wear.

• Do not use the appliance if the power supply cord or mains plug is damaged or defective.

• If the power supply cord or mains plug is damaged or defective it must be repaired by the

manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.

• Never attempt to remove or replace any parts other than those specified in this manual.

• Do not attempt to repair the appliance. Take it to your nearest Black & Decker-owned or

authorised Service Centre for repair.

Additional safety instructions for Coffee Makers

• Do not immerse the appliance, cord set or plug in liquids

• Always leave sufficient space around the appliance for ventilation

• Do not use the unit if you have wet hands or bare feet.

Warning: the lid, carafe and hotplate may be hot during use & the "cool - down" period.

Warning: Steam may escape from the lid during use. Use caution when opening the lid.

Assembly

This appliance is supplied fully assembled, however all parts should be cleaned before use. See “Cleaning” for details.

-5-

English

Use

Before first use, operate the coffee maker with clean water 2 or 3 times, then switch off the appliance and let it cool down for 5 minutes. Then repeat the process with fresh water. Your coffee maker is now ready for use.

Fill the carafe (7) with cold fresh water, then lift the lid (4) and add the required amount to the water tank (3). The quantity of water added can be measured from the scale in number of cups on the water level indicator. Once the water has been added, place the carafe onto the heating plate (10). Place the permanent filter (9) to the filter carrier (6). Add the required amount of ground coffee to the filter and close the lid.

Place the appliance on a clean, flat work surface & connect it to a suitable electrical supply.

Press the power switch (1) to the on position. The switch (8) will light up, and after a few moments, coffee will begin to pour into the carafe (7). Once the flow of coffee stops, the coffee can be served. Removing the carafe from the heating plate will close a valve, preventing leaks onto the heating plate.

Note: The carafe should not be removed while coffee is flowing into the carafe. Any coffee remaining in the carafe can be kept warm by returning the carafe to the heating plate (10).

Note: The coffee maker should be allowed to cool before re-filling with cold water. Disconnect the product from the mains supply & clean it after use.

Maintenance

Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance or cleaning of the tool, disconnect the appliance from the power supply. Ventilation slots should be cleaned occasionally with a clean, dry paint brush.

Cleaning

The main body of the appliance should be cleaned with a clean damp cloth only. The carafe, carafe lid, filter & filter carrier can be washed in warm soapy water. Rinse with clean water and dry thoroughly with a dry soft cloth.

Note: Do not use abrasives or chemical cleaners on any part of this appliance.

Note: All parts must be thoroughly dried before use.

The coffee maker should be de-scaled regularly. To de-scale, operate as normal, but add 25ml white vinegar to the carafe. After the water / vinegar mix has passed though the appliance it can be disposed of.

Add a carafe of clean water to the water tank & operate the appliance as previously. This should be repeated 2 more times before the product is used again.

-6-

+ 14 hidden pages