Black & Decker Fx400, Fx400bmg Instruction Manual [ar]

www.blackanddecker.ae

FX400

FX400BMG

ENGLISH

Parts Identiﬁcation

A. Filler Cap

J. Control knob

B. Lid

C. Blender jug

D. Jug base

E. Jug seal

F. Blade holder

G. Blade

H. Motor coupling

I. Food processor body

K Mincer jug lid

L. Mincer jug

M. Mincer blade

N. Mincer blade holder

O. Grinder jug

P. Grinder blade

Q. Grinder blade holder

R. Mincer spatula

Note: Parts A-F and K-R is available only with FX400BMG

Parts Identiﬁcation

ENGLISH

S. Food processor jug

T. Blade holder

U. Emulsiﬁer

V. Kneading blade

W. Stainless steel chopping blade

X. Grating disc

Y. Food processor jug lid

Z. Pusher

ENGLISH

Intended use

Your Black & Decker appliance comes with 7 accessories* to perform below functions:

Stainless Steel blade for chopping, beating, creaming, crumbling, cutting, folding in, mashing, mincing and mixing.

Shredding and Slicing disc for grating and shredding vegetables, fruits and cheese. The reverse side of this disc is used for cutting and slicing vegetables and fruits.

Fanned disc for whisking, whipping and emulsifying.

Separate blade for kneading dough.

** Blender for blending, crushing, foaming, grinding, pureeing, homogenizing, liquidizing, milling, shaking and stirring.

**Grinder mill for grinding coffee, herbs and spices.

** Mincer mill for mincing meat and chopping vegetables

Do not use this appliance for any other purpose. This product is intended for indoor household use only.

*7 accessories with model FX400BMG

**These accessories are available with model FX400BMG

Read this entire manual carefully before using the appliance.

including the following, should always be

followed to reduce the risk of ﬁre, electric

shock and personal injury.

• The intended use is described in this manual.

The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.

• Retain this manual for future reference.

Using your appliance

• Always take care when using the appliance.

• Never pull the power supply cord to

disconnect the plug from the socket. Keep the power supply cord away from heat, oil and sharp edges.

• Do not place the appliance on or near heat

sources or in a heated oven.

• Do not use the appliance outdoors.

• Always protect the motor unit from water or

excessive humidity.

• If the power supply cord is damaged during

use, disconnect the appliance from the power supply immediately. Do not touch the power supply cord before disconnecting from the power supply.

• Disconnect the appliance from the power supply when not in use, before ﬁtting or

removing parts and before cleaning.

Safety instructions

• Warning! When using mains-powered appliances, basic safety precautions,

• Never let the appliance operate unattended.

• Never reach into the jar with your ﬁngers or

an object while the appliance is running.

ENGLISH

• Only remove the jar after you have switched the appliance off and any moving parts have stopped.

• Do not touch the cutting blades.

• Keep any loose clothing or long hair away from the feeding tube and any moving parts.

• Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.

• Do not immerse the appliance, cord set or plug in liquids.

Safety of others

• This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

After use

• Remove the plug from the socket before leaving the appliance unattended and before changing, cleaning or inspecting any parts of the appliance.

• When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances.

Inspection and repairs

• Switch off the appliance before cleaning, changing accessories or approaching parts which move in use

• Before use, check the appliance for damaged or defective parts. Check for

breakage of parts, damage to switches and any other conditions that may affect its operation.

• Do not use the appliance if any part is damaged or defective.

• Do not use the appliance if the blade is damaged.

• Have any damaged or defective parts repaired or replaced by an authorised repair agent.

• Before use, check the power supply cord for signs of damage, ageing and wear.

• Do not use the appliance if the power supply cord or mains plug is damaged or defective.

• If the power supply cord or mains plug is damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.

• Never attempt to remove or replace any parts other than those speciﬁed in this manual.

Electrical safety

Before use, check that the mains voltage corresponds to the voltage on the rating plate.

This appliance is double insulated in accordance with EN 60335-2-14; therefore no earth wire is required.

• To avoid the risk of electric shock, do not immerse the cord, plug or motor unit in water or other liquid.

• Check that the supply voltage shown on the rating plate of the appliance matches that of your electrical system. Any connection error will invalidate the guarantee.

ENGLISH

Mains plug replacement

If a new mains plug needs to be ﬁtted:

• Safely dispose of the old plug

• Connect the brown lead to the live terminal

of the new plug

• Connect the blue lead to the neutral terminal

• If the product is class I (earthed), connect

the green/yellow lead to the earth terminal

Warning! If your product is class II double insulated (only 2 wires in the cord set), no connection is to be made to the earth terminal

• Follow the ﬁtting instructions supplied with

good quality plugs

• Any replacement fuse must be of the same

rating as the original fuse supplied with the product.

Warning! The above section on mains plug replacement is for authorized service centre personals.

Assembly

1. Wash all detachable parts (see chapter ‘Maintenance and cleaning’).

2. For the food processor ﬁt the required

accessory blade (U, V, W or X) onto the

blade holder (T). ﬁt the assembled blade

holder into the food processor jug (S)s

3. For the blender ﬁt the jug seal (E) around the

base of the blender blade (G), place the blade (G) into the blade holder (F) then place the blade holder onto the blender jug base (D).

4. For the mincer or grinder ﬁt the jug seal (E)

into the required blade holder (N or Q), then place the blade holder (N or Q) on to the required jug base (L or O).

5. Secure the blade holder (F, N or Q) by turning it anti clockwise.

Use

1. Place the appliance on a ﬂat, stable surface.

2. Put the ingredients into the required jug.

3. If using the food processor ﬁt the the lid (Y)

onto the jug (S) by turning it clockwise.

4. If using the blender push the lid (B) and ﬁller

cap (A) onto the jug (C).

5. If using the grinder or mincer seal the jug by

ﬁtting the required blade holder (N or Q) and with the seal (E) and secure by turning

anti-clockwise.

Note: When using the blender or mincer, the

correct lid must be ﬁtted.

6. Place the jug onto the food processor body (I).

7. Secure the jug by turning it anti clockwise.

8. Connect it to the electrical supply and select the required speed using the rotary switch.

The following settings are available:-

P = Pulse Operation

O = Power Off

1 = Low Speed

2 = High Speed

The appliance should be disconnected from the mains supply before removing the jug.

ENGLISH

Recommendations when food processing

Function Types of food Speed Time

Chopping *1 Vegetables Pulse or 2 15 sec and fruits

Chopping *1 Meat, cheese 1 20 sec and chocolate

Blending *1 Soups and 1 20 sec thick drinks

Pureeing *1 Cooked vegetables 1 10-15 sec and soft fruits

Mixing *1 Pastry and scones 2 40 sec

Mashing *1 Cooked potatoes 2 60 sec and baby food

Kneading *2 Bread dough 1 20 sec

Folding in *2 Mousse batter 1 15 sec

Creaming *2 Cake batter 1 30 sec

Slicing *3 Vegetables and fruits 1 or 2 5 sec

Slicing *3 Potatoes and cheese 1 5 sec

Shredding *3g Vegetables and fruits 1 or 2 5 sec

Grating *3 Cheese and 1 5 sec chocolate

Whisking *4 Eggs 2 1-2 min

Whipping *4 Cream 2 1-2 min

Emulsifying *4 Light batters for 2 1-2 min omlettes, pancakes etc

*1 Use the Chopping blade (W)

*2 Use the kneading blade (V)

*3 Use the grating disc (X)

*4 Use the Emulsiﬁer (U)

Note: The The food processor functions should not be run for longer than 1 minute. After a continuous run of 1 minute, the blender should be allowed to cool down for at least 2 minutes before further use.

Warning: Pulse mode should not be operated more than 10 sec at a time.

Recommendations when blending (FX400BMG Only)

Function Types of food Speed Time

Blending Liquids 2 15 sec

Liquidizing Fruits or vegetables 1 30 sec cut in cubes with equal amount of water

Crushing Ice cubes of Pulse or 1 15 sec dimension 3x2cm

Foaming milk shakes, juices etc 2 20 sec

Pureeing Vegetables and 1 30 sec soft fruits

Stirring Batter or soups 1 1 min

Note: The blender should not be run for longer than 1 minute. After a continuous run of 1 minute, the blender should be allowed to cool down for at least 2 minutes before further use.

Warning: Pulse mode should not be operated more than 10 sec at a time.

Recommendations when grinding (FX400BMG Only)

Function Types of food Speed Time

Dry grinding Coffee beans Pulse 10-20 sec

Dry grinding Dry herbs 1 20 sec

Dry grinding Spices Pulse 10-20 sec

Note: The dry grinder should not be continuously run for longer than 40 seconds.

Warning: Pulse mode should not be operated more than 10 sec at a time.

Warning: Max capacity of Grinder mill is 50g and mincer mill is 150g

ENGLISH

Warning! The grinder should NOT be used for wet grinding of hard food materials like pulses, beans, grains etc. This will lead to damage of blades and reduction of motor life span.

Recommendations when mincing (FX400BMG Only)

Function Types of food Speed Time

Mincing Meat cubes of Pulse or 1 10-20 sec dimension 2x2cm

Mincing Pulses soaked for Pulse 30 sec at least 8 hrs

Mincing Chutney - Vegetables 1 20 sec

and ground spices with water

Note: The mincer should not be continuously run for longer than 40 seconds.

Warning: Pulse mode should not be operated more than 10 sec at a time.

Warning: Max capacity of Grinder mill is 50g and mincer mill is 150g

Useful advice

• Place the appliance on a clean, ﬂat work

surface.

• Connect the appliance to a suitable electrical

supply. Rotate the control knob (J) to the required speed.

• When blending is complete return the control

knob to the off (0) position.

• Once the blade (F) has come to a complete stop, lift the jug (C) from the blender body (I).

• Remove the lid (B) and pour the ingredients

into a suitable container.

Note: Ingredients can be added by inserting them through the hole left when the ﬁller cap (A) is removed.

Warning! Never operate the Blender without the

lid (B) ﬁtted.

Warning! Never operate the Food processor without the lid (Y) ﬁtted.

Warning! Never operate the mincer without lid (K) ﬁtted

Maintenance & cleaning

• Switch the appliance off, remove the plug

from the wall socket and wait until the blade has stopped rotating.

• The appliance is easier to clean if you do so

immediately after use.

• Do not use abrasive cleaning agents,

scourers, acetone, alcohol etc. to clean the appliance.

• All detachable parts are dishwasher-safe.

• Place the detachable plastic parts on the top

tray of the dishwasher. Make sure they are placed well away from the heating element.

• All removable parts can be cleaned with a

cleaning brush in warm water with some

washing-up liquid and rinse them under the

tap.

• Remove the dirty parts from the motor unit. Clean the motor unit with a damp cloth.

• Never immerse the motor unit in water nor

rinse it under the tap.

Technical data

Voltage 220 – 240 Volts

Supply 50/60 Hz

Power 400W

Weight 2.8kg

ENGLISH

Protecting the environment

Separate collection. This product must not

be disposed of with normal household waste.

Should you ﬁnd one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with other household waste. Make this product

available for separate collection.

• Black & Decker provides a facility for

recycling Black & Decker products once they have reached the end of their working life.

This service is provided free of charge. To

take advantage of this service please return

your product to any authorised repair agent who will collect them on our behalf.

• You can check the location of your nearest

authorised repair agent by contacting your

local Black & Decker ofﬁce at the address indicated in this manual. Alternatively, a list of authorized Black & Decker repair agents and

full details of our after-sales service and contact are available on the Internet at: www.2helpU.com.

Warranty

Black & Decker is conﬁdent of the quality of its

products and offers an outstanding warranty.

This warranty statement is in addition to and in no way prejudices your statutory rights.

The warranty is valid within the territories of the Member States of the European Union and the European Free Trade Area.

If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker warranty to replace defective parts, repair products subjected to fair

wear and tear or replace such products to ensure minimum inconvenience to the customer unless:

The product has been used for trade,

professional or hire purposes;

The product has been subjected to misuse

or neglect;

The product has sustained damage

through foreign objects, substances or

accidents;

Repairs have been attempted by persons

other than authorised repair agents or

Black & Decker service staff.

To claim on the warranty, you will need to submit proof of purchase to the seller or an authorised

repair agent. You can check the location of your

nearest authorised repair agent by contacting

your local Black & Decker ofﬁce at the address

indicated in this manual.

Alternatively, a list of authorised Black & Decker

repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.

+ 19 hidden pages