Black & Decker FSL12 User Manual

FSL12

FSL144

1

Copyright Black & Decker

2

12

3

54

A

3

B

4

267

FLASHLIGHT FSL12/FSL144

ENGLISH

CONGRATULATIONS!

You have chosen a Black & Decker tool. Our aim is
to provide quality tools at an affordable price. We
hope that you will enjoy using this tool for many
years.

INTENDED USE

Your Black & Decker flashlight FSL12/FSL144 has
been designed to provide additional lighting for
your DIY jobs. This tool is intended for consumer
use only.

SAFETY INSTRUCTIONS

Warning symbols

The following symbols are used in this manual:

Denotes risk of personal injury, loss of life
or damage to the tool in case of non­observance of the instructions in this
manual.

Denotes risk of electric shock.

Read the manual prior to operation.

Fire hazard.

Know your tool

◆ Warning! When using battery-powered

tools, basic safety precautions,
including the following, should always
be followed to reduce the risk of fire,
leaking batteries, personal injury and
material damage.

◆ Read all of this manual carefully before

operating the tool.

◆ Retain this manual for future reference.

General

1. Use appropriate tool

The intended use is described in this
instruction manual.
Warning! The use of any accessory or
attachment or performance of any operation
with this tool other than those recommended
in this instruction manual may present a risk of
personal injury.

2. Check for damaged parts

Before use, carefully check the tool for
damage. Ensure that the tool will operate
properly and perform its intended function.
Do not use the tool if any part is damaged or
defective. Have any damaged or defective
parts repaired or replaced by an authorised
repair agent. Never attempt any repairs
yourself. Do not use the tool if the switch does
not turn it on and off.

3. Remove the battery

Remove the battery when the tool is not in use,
before changing any parts of the tool,
accessories or attachments and before servicing.

4. Store idle tools

When not in use, tools, batteries and chargers
should be stored in a dry, locked up or high
place, out of reach of children.

5. Repairs

This tool complies with relevant safety
requirements. Repairs should only be carried
out by qualified persons using original spare
parts; otherwise this may result in considerable
danger to the user.

Additional safety instructions for batteries

◆ Never attempt to open for any reason.

◆ Do not expose to water.

◆ Do not store in locations where the

temperature may exceed 40 °C.

◆ Charge only using the charger provided with

the tool.

◆ Charge only at ambient temperatures between

4 °C and 40 °C.

5

ENGLISH

◆ Before charging, make sure that the battery is

dry and clean.

◆ Use only the correct type of battery for the tool

(see technical data).

◆ When disposing of batteries, follow the

instructions given in the section “Protecting
the environment”.

◆ Under extreme conditions, battery leakage

may occur. When you notice liquid on the
battery, proceed as follows:

- Carefully wipe the liquid off using a cloth.
Avoid skin contact.

- In case of skin or eye contact, follow the
instructions below.

The battery fluid, a 25-30% solution of
potassium hydroxide, can be harmful.
In case of skin contact, immediately rinse
with water. Neutralise with a mild acid
such as lemon juice or vinegar. In case of
eye contact, rinse abundantly with clean
water for at least 10 minutes. Consult a
physician.

Fire hazard! Avoid short-circuiting the
contacts of a detached battery (e.g. when
storing the battery in a toolbox).

Do not incinerate the battery.

4. Battery

5. Battery release buttons

ASSEMBLY

Fitting and removing the battery (fig. A)

◆ To fit the battery (4), line it up with the

receptacle on the tool. Slide the battery into
the receptacle and push until the battery snaps
into place.

◆ To remove the battery, push the two release

buttons (5) simultaneously while at the same
time pulling the battery out of the receptacle.

USE

Switching on and off (fig. A)

◆ To switch the tool on, press the on/off switch (1).

◆ To switch the tool off, press the on/off switch

again.

Adjusting the light beam (fig. A)

◆ Turn the lens holder (2) to adjust the light

beam as required.

MAINTENANCE

Your Black & Decker tool has been designed to
operate over a long period of time with a
minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and
regular cleaning. Your charger does not require
any maintenance apart from regular cleaning.

Do not attempt to charge damaged
batteries.

Additional safety instructions for flashlights

◆ Never look directly into the light beam.

◆ Do not touch the bulb shortly after using the

flashlight, as the bulb may be hot.

◆ Use only the appropriate type of replacement

bulbs.

OVERVIEW (fig. A)

1. On/off switch

2. Lens holder

3. Carrying strap

6

◆ Before performing any maintenance on

the tool, remove the battery from
the tool.

◆ Unplug the charger before cleaning it.

Replacing the bulb (fig. B)

The bulb can be easily replaced.

Do not touch the bulb shortly after using
the flashlight, as the bulb may be hot.

◆ Remove the battery.

◆ Remove the lens holder (2) by turning

counterclockwise.

ENGLISH

◆ Remove the retaining collar (6) by turning it

slightly and pulling it of the bulb fitting.

◆ Pull the bulb (7) out of the fitting.

◆ Insert a new bulb.

◆ Re-fit the retaining collar and lens holder.

PROTECTING THE ENVIRONMENT

Tools

Should you find one day that your tool
needs replacement, or if it is of no further
use to you, think of the protection of the
environment. Black & Decker repair agents
will accept old Black & Decker tools and
ensure that they are disposed of in an
environmentally safe way.

Batteries

Black & Decker batteries can be recharged
many times. At the end of their useful life,
discard batteries with due care for our

Cd

environment:

◆ Run the battery down completely, then remove

it from the tool.

◆ NiCd and NiMH batteries are recyclable. Take

them to your service agent or a local recycling
station. Collected batteries will be recycled or
disposed of properly.

Technical data

FSL12 FSL144

Voltage VDC12 14.4
Battery cat. no. A9275 A9276
Bulb part no. 429881-01 429881-01
Weight (without battery) kg 0.3 0.3

GUARANTEE (UK, AUSTRALIA AND
NEW ZEALAND ONLY)

Should your Black & Decker product become
defective due to faulty materials or workmanship,
within 24 months from the date of purchase, we
guarantee to either replace all defective parts or ­at our discretion- to replace the unit free of
charge, provided that:

◆ The product is returned to us or one of our

authorised repair agents with proof of purchase.

◆ The product has not been used for trade,

professional or hire purposes.

◆ The product has not been subjected to misuse

or neglect.

◆ The product has not sustained any damage

through foreign objects, substances or
accidents.

◆ Repairs have not been attempted by anyone

other than our service staff or authorised repair

agents.
This guarantee is offered as an extra benefit and
does not affect your statutory rights.

AFTER SALES SERVICE (UK, AUSTRALIA
AND NEW ZEALAND ONLY)

Black & Decker offers a nationwide network of
authorised repair agents. The use of other than
genuine Black & Decker parts and accessories may
reduce the performance of the tool and cause
personal injury and material damage. The terms
and conditions of the warranty could also be
rendered void.

OUR AFTER SALES SERVICE POLICY
(UK, AUSTRALIA AND NEW ZEALAND
ONLY)

Full details on our after-sales service are available
on the Internet at www.2helpU.com. Alternatively,
contact our Service and Information Centre at the
address towards the back of this manual.

It is our aim that all Black & Decker customers
should be totally satisfied with their
Black & Decker product and our after sales service.
If any help or advice is needed, please contact
your local Black & Decker repair agent.

If your product needs repair, please take or send it
to an authorised repair agent, providing proof of
purchase if claiming a guarantee repair.

7

ENGLISH

OTHER DIY TOOLS

Black & Decker has a full range of tools that make
DIY jobs easy. If you would like further information
on the following products, please contact our
Service and Information Centre (see the address
page towards the end of this manual) or your local
Black & Decker retailer.

Drills
Cordless screwdrivers
Cordless drills/screwdrivers
Sanders
Jigsaws
Circular saws
Mitre saws
Angle grinders
Planers
Routers
Corded and cordless multi-purpose tools
Paint strippers
Workbenches

We also have a wide range of accessories for the
above tools.

Not all products are available in all countries.

8

9

Australia DEWALT Industrial Power Tool Company Tel. [phone]

7 Clarice Road Fax [phone]
Box Hill, Victoria 3128

New Zealand Black & Decker Tel. [phone]

81 Hugo Johnson Drive Fax [phone]
Penrose, Auckland, New Zealand

South Africa Black & Decker South Africa (Pty) Ltd Tel. [phone]

Physical address: Fax [phone]
146 Lechwe Street
Corporate park
Randjiesfontein, Midrand
Postal address:
Postnet Suite 107, Private Bag X65
Halfway House 1685

United Kingdom Black & Decker Tel. [phone]

210 Bath Road Fax [phone]
Slough, Berkshire SL1 3YD Helpline 01753 574277
Guarantee card return address:
PO Box 821, Slough
Berkshire SL1 3AR

10

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

✁

Yes

No

Data protection act:

Tick the box if you prefer not to receive further information.

Dealer address Date of purchase

Was this tool bought as a replacement?

Name: ......................................................................................................

Address: ...................................................................................................

Dealer address: ........................................................................................

..................................................................................................................

..................................................................................................................

Yes

No

Town: .......................................................................................................

Postal code: .............................................................................................

Was this tool a gift?

Yes

No

Was this tool your first purchase?

11

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

✁

Please complete this section immediately after the purchase of your tool and send it to Black & Decker in your

country. If you live in Australia or New Zealand, please register by using the alternative guarantee card

supplied.

GUARANTEE CARD

12