Black & Decker CA-DHWK User Manual

CA-DHWK | Universal Power Adapter with Fused Link Harness

Package Contents:

(1) CA-DHWK - Universal Power Adapter for Motorcycles, ATVs, etc.

WARN ING!

CA-DHWK Universal Power Adapter for Motorcycles, ATVs, etc.

To prevent accidental vehicle start up, which could cause serious injury or death, disconnect battery cables before installing.

Battery Disconnect

WARN ING!

Disconnect negative (-) battery cable  rst. If positive (+) cable should contact ground with negative (-) cable

still connected, the resulting sparks can cause a battery explosion, which could result in serious injury or death.

Positive

Negative

Install Battery Harness to Battery Posts

Step 1.

Step 2.

Attach the positive (Red) lead of the harness to the positive (+) battery post.

Attach the negative (Black) lead of the harness to the negative (+) battery post.

Red

Vehicle battery

Fuse

Attach 12V Socket Adapter to Battery Harness

Step 1.

Step 2.

Connect the double-pin connector on the 12V socket adapter to the double-pin connector on the battery harness.

12V power socket

Carefully reconnect vehicle battery cables. Insert a 12V accessory into the 12V socket to power your mobile device (not included, sold separately).

Black

Safety Precautions

Follow all manufacturer safety guidelines for operating your device. Failure to practice safe usage while operating your device while driving may result in damage, injury, or death.

Arkon is not responsible for any damages caused to your vehicle, your device, or yourself due to the installation or use of this mount.

The Mobile Mounting Specialists™

Consumer Hotline:

USA (800) 841-0884 INT’L (626) 254-9005

Monday - Friday 9 am - 5 pm, PST

www.arkon.com

Arcadia, CA 91006 USA

Designed in USA | Made in China