BT-200V Operator Manual 1
Vascular Doppler
USER MANUAL
HI dop
BT-200V Operator Manual
Table of Contents
Section 1. The HI • dop Doppler
1.1 The HI • dop Doppler
1.2 Composition
Section 2. How t o use your HI • dop ?
2.1 Operational Requirements
2.2 How to use ?
Section 3. Maintenance and Cleaning
General Information
Product Guarantee
Specifications
‥‥‥‥ 1
‥‥‥‥ 1
‥‥‥‥ 1
‥‥‥‥ 3
‥‥‥‥ 3
‥‥‥‥ 3
‥‥‥‥ 4
‥‥‥‥ 5
‥‥‥‥ 7
‥‥‥‥ 8
Section 1. The H I • dop Doppler
1.1 The HI • dop Doppler
HI • dop is a pocket-s iz ed vascul ar Doppler t hat measures t he blood flow
and outputs the heart or blood sound through a built-in speaker.
1.2 Composition
▶ Main Body (Front and Top View)
① Power and Volume Switch
② Ear Phone Jack
③ Ring for Necklace
④ Probe Holder
⑤ LCD Window
⑥ Sound Output
P/N : 200V-ENG-OPM-EUR-R03 Bistos Co.,Ltd.
BT-200V Operator Manual 2
▶ Main Body (Rear View)
① Battery Compartm ent
② Label
③ Ring for Necklace
④ Power and Volume Switch
▶ Probe
①
②
① Sensor
② Groove Joint
③ Probe Connector
③
P/N : 200V-ENG-OPM-EUR-R03 Bistos Co.,Ltd.
P/N : 200V-ENG-OPM-EUR-R03 Bistos Co.,Ltd.
HR
Battery Low
Heart Rhythm
BT-200V Operator Manual 4
BT-200V Operator Manual 3
Section 2. How to use your HI • dop ?
2.1 Operational Requirements
▶ The HI • dop has to be used under surr ounding temperature of 10℃∼
40℃ and humidity of 30% ~ 85％.
▶ Handle with care.
▶ Avoid dust or flammable mat eri als .
▶ Make sure the batteries are i ns ert ed cor r ect l y.
▶ When detaching the probe from the main body, sli de the probe upwards to
prevent damage.
2.2 How to use ?
▶ Probe Range :
- 4MHz : Deep vessels
- 5MHz : General purpose
- 8MHz : Peripheral vessels
▶ Turn the power and volume swi tc h count erc l ock wi se t o turn t he dev ic e on
and adjust the volume level.
▶ Apply a liberal amount of ult ras ound gel t o the fac e of tr ans ducer
(end of the probe).
▶ Place the transducer dir ec tl y agains t the meas ur ing pos it ion.
▶ Search for the position whi c h can get t he cl ear est sound.
◊ HI • dop
▶ HR will appear on the scr een and heart r hyt hm i ndic ator wi ll flas h as
shown in Figure.
▶ If the voltage level of batter y is lower than t he requi r ed l ev el, the batt ery
low message ”bat Lo” will appear as shown in Figure. In this case, the unit
will not functional corr ec tl y and the batter i es s houl d be repl aced.
Section 3. Maintenance and Cleaning
To keep the device clean, apply al cohol on a s oft cloth and wi pe t he body
and the probe once a month. Do not use l acquer , thi nner, ethy lene, or an
oxidizing agent. If you use mater i al t hat i s not approved, i t may caus e
damage to the product. In this case, the product will not be guar anteed within
the warranty period. Keep t he probes c lean f r om dust or grime. Wi pe the
cable with a damp, and with cli nic al alcohol onc e a week. Do not i mmer s e
the main body or the probe in any liquid or det ergent . Keep t he main uni t
and the probe away from any li quid.
P/N : 200V-ENG-OPM-EUR-R03 Bistos Co.,Ltd.
BT-200V Operator Manual 6
General Informati on
▶ HI • dop is classified as listed below;
- Type-BF.
- Internal electric al equipment ac c or ding t o IEC/EN 60601-1
- This equipment conforms to Level B according to IEC/EN 60601-1-2
▶ Turn the power off after use. I f you do not turn t he power swi t ch off , 1
minute
later, the sound will be muted autom atically. In this case, a single “beep”
sound will be heard. 3 minutes l ater , the s y st em will go to sl eep m ode.
In this case two “beep” sounds wi ll be heard. The di spl ay wil l be turned off .
In this mode power very little power is consumed.If you want to wake up the
device from sleep mode, first of all, turn the pow er off and then 1 second
later turn the switch on by turning the switch counterclock wise.
▶ 1.5Vⅹ2(AA Type) Bat ter ies ar e used f or the sy s tem power.
Do not use any other type of battery. Use of the wr ong batt ery t ype may
damage the equipment.
▶ Federal law restricts this device to sale by or on the order of a physician.
▶ Do not open the device cover or disas s emble t he dev ic e.
Refer servici ng to qualified personnel of Bistos Co., Ltd.
P/N : 200V-ENG-OPM-EUR-R03 Bistos Co.,Ltd.
BT-200V Operator Manual 5
▶ Definition of Symbols
This symbol identifies a safety note. Be sur e t o underst and
the function of this control before usi ng i t. Control func t ion i s
described in the operation manual
Type BF Equipment
P/N : 200V-ENG-OPM-EUR-R03 Bistos Co.,Ltd.
P/N : 200V-ENG-OPM-EUR-R03 Bistos Co.,Ltd.
Loading...