Bissell Jetscrub PET 2527, Jetscrub PET 2529, Jetscrub PET 2526 User Manual

JETSCRUB PET

2526, 2529, 2527 SERIES

Go online for a comprehensive walkthrough
of your new purchase!

This guide features everything you need to get ready for first use,
including setting up, using and maintaining your machine, but join
us online for a comprehensive walkthrough. Our online support
includes tips and troubleshooting, videos, product registration,
parts, and more. Go to BISSELL.com/support.

BISSELL.com 1

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.

When using an electrical appliance, basic precautions should be observed, including the following:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK

WARNING

OR INJURY:

» Connect to a p roperly grounded ou tlet only. See

grounding i nstructions . Do not modify the 3- prong
grounded plug.

» Do not leave app liance when it is plugge d in. Unplug

from outlet wh en not in use and before ser vicing.
» Use indoors only.
» Do not allow to be us ed as a toy. Close attention is

necessa ry when used by or nea r children.
» Do not use for a ny purpose other than d escribed

in this user gui de. Use only manufa cturer’s

recommended attachments.
» Do not use with d amaged cord or plug. If a ppliance

is not working a s it should, or has bee n dropped,

damaged , left outdoors , or dropped into water, have

it repaired at a n authorized service ce nter.

» Do not pull or c arry by cord, use cord as a han dle,

close a doo r on cord, or pull cord around s harp
edges or cor ners. Do not run ap pliance over cord.
Keep cord away from he ated surfaces.

» Do not unplu g by pulling on cord. To unplug , grasp

the plug, n ot the cord.
» Do not handl e plug or appliance with wet h ands.
» Do not put any o bject into openings . Do not use with

any opening b locked; keep openings f ree of dust,

lint, hair, and any thing that may reduce air f low.
» Keep hair, loose cl othing, fingers , and all parts of

body away from op enings and moving pa rts.
» Turn OFF all control s before plugging or unp lugging

appliance.
» Use extra c are when cleaning on st airs.
» Do not use to pick u p flammable or combu stible

materials (lig hter fluid, gasoline, ke rosene, etc.) or

use in areas wh ere they may be present.

» Do not use app liance in an enclosed s pace filled with

vapors give n off by oil-based pai nt, paint thinner,
some moth-proofing substances, flammable dust,
or other expl osive or toxic vapors.

» Do not use to pick u p toxic material (chlorine blea ch,

ammonia, drain cleaner, etc.).

» Do not pick up a nything that is burnin g or smoking,

such as cigaret tes, matches, or ho t ashes.

» Use only BIS SELL® cleaning produc ts intended for use

with this appl iance to prevent internal compo nent
damage. See the Cleaning Formula section of this
guide.

» Do not immer se. Use only on sur faces moistened by

the cleanin g process.
» Keep applian ce on a level surface.
» Do not carr y the appliance while in u se.
» Always instal l float before any wet pick-up

operation.

SAVE THESE INSTRUCTIONS

THIS MODEL IS FOR HOUSEHOLD USE ONLY. COMMERCIAL USE OF THIS UNIT VOIDS THE MANUFACTURER’S WARRANTY.

WARNING

Improper connection of the equipment-grounding conductor can result in a risk
of electri cal shock. Check w ith a qualified elec trician or servi ce person if you aren’t
sure if the out let is properly groun ded. DO NOT MODIF Y THE PLUG. If i t will not fit
the outlet, h ave a proper outlet inst alled by a qualified ele ctrician. Thi s appliance
is designe d for use on a nominal 120 -volt circuit, and ha s a grounding atta chment
plug that loo ks like the plug in the il lustration. Make ce rtain that the app liance
is connec ted to an outlet having the s ame configuration a s the plug. No plug
adapter should be used with this appliance.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded
wiring syste m. If it should malf unction or break
down, groun ding provides a safe pa th of least
resistance for electrical current, reducing the risk
of electri cal shock. The cor d for this appliance
has an equipment-grounding conductor and a
grounding p lug. It must only b e plugged into an outl et that is properly inst alled
and grounded in accordance with all local codes and ordinances.

Grounded

Outlets

Grounding Pin

Troubleshooting

For a comprehensive walkthrough of your product and support tips visit BISSELL.com/support.

Problem Possible Cause Remedies

Loss of suction
power

Reduced spray OR
no spray

Other maintenance or service not included in the manual should be performed by an authorized service representative.

Dirty Water Tank has picked up maximum
amount of dirty water and has reached full
line.

Brush Roll Nozzle is not latched in place. Turn Power OFF / Unplug machine and re-install Brush Roll Nozzle.

Tanks may not be seated properly. Turn Power OFF / Remove both tanks and reseat them so they fit

Clean Water Tank is empty. Refill tank.
Clean Water Tank isn’t seated completely. Turn power OFF / Remove and re seat tank.
System isn’t completely primed. Hold Spray Trigger for 10 to 15 seconds to make sure the solution has

Brush Roll Nozzle isn’t latched in place. Turn power OFF / Unplug machine and re-install Brush Roll Nozzle.
Not holding trigger to spray solution. Hold trigger continuously while using the machine.

Empty Dirty Water Tank .

properly on the machine.

flowed to the spray tips .

Warranty

3-Year limited warranty, may vary by state. Visit BISSELL.com/support or call 1-844-383-2630

for complete warranty information.

2 BISSELL.com

We’re so happy you chose the JetScrub Pet. We put this guide
together to help you set up, use and maintain your JetScrub Pet.
We’ve also included some tips we think will come in handy when you
first start using your JetScrub Pet, so let’s get started!

For a comprehensive walkthrough of your product
go to BISSELL.com/support.

Warranty ...............................................................................2

What’s in the Box? .........................................................4

Getting to Know Your Carpet Washer ............. 4

Assembly .............................................................................. 4

Cleaning Formulas ......................................................... 5

Filling the Clean Water Tank....................................6

Cleaning Carpets and Area Rugs ........................7

Cleaning Your Stairs ......................................................8

Using CleanShot ..............................................................8

Emptying the Dirty Water Tank ............................9

Cleaning & Replacing the Brush Roll and

Chamber .............................................................................10

Using the Storage Tray ................................................11

Storing Your Machine ...................................................11

BISSELL.com 3

What’s in the Box?

Standard accessories may vary by model.To identify what should be included with your purchase,
please refer to the “Carton Contents” list located on the carton top flap. Additional accessories
may be purchased at BISSELL.com.

Body Handle

Storage Tray

(select models

only)

Carpet Brush Roll

& Nozzle

Hard Floor Brush

Roll & Nozzle

(select models only)

Nozzle Clean Out

Too l

Getting to Know Your Carpet Washer

For additional support videos and information about your product, visit BISSELL.com/support.

1

3

2

Product View

4

1. Upper Handle

2. SmartClean® Fingertip Controls

3. Solution Spray Trigger

4. Quick Release™ Cord Wrap

5. Clean Water Tank

5

6. Dirty Water Tank

7. Float Stack

8. Lower Cord Wrap

9. Removable Brush Roll & Nozzle

10. Cleanshot®

11. Foot

6

9

8

7

10

11

Assembly

Go to BISSELL.com/support for additional how-to videos.

click

1. Insert handle into handle

post until you hear a “click”.

4 BISSELL.com

2. Press button to extend

handle.

3. To easily unwrap the cord

for use, turn the Quick Release™
Cord Wrap downward.