Thank you for buying a BISSELL Heavy Duty Vacuum
Everything we know about floor care went into the design and construction
of this complete, high-tech home cleaning system.
We trust that it will bring you many years of satisfaction. It is backed with a
limited five-year warranty. We also stand behind it with a knowledgeable,
dedicated Consumer Services department, so, should you ever have a
question, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is
a global leader in the design, manufacture, and service of high quality
homecare products like your Heavy Duty Vacuum.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
2
www.bissell.com 800.237.7691
2
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical
precautions should be observed, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING YOUR
UPRIGHT VACUUM.
Always connect to a polarized outlet (one slot is wider
than the other). Unplug from outlet when not in use and
before conducting maintenance.
WARNING: To reduce
the risk of fire, electric shock,
or injury:
■
Do not modify the polarized plug to fit a
non-polarized outlet or extension cord.
■
Do not leave vacuum cleaner unattended when it
is plugged in.
■
Unplug from outlet when not in use and
before servicing.
■
Do not use outdoors or on wet surfaces.
■
Do not allow children to operate vacuum
cleaner or use as a toy.
■
Close attention is necessary when used by or
near children.
■
Do not use for any purpose other than described in
this User’s Guide.
■
Use only manufacturer’s recommended
attachments.
■
Do not use with damaged cord or plug.
■
If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped
into water, have it repaired at an authorized
service center.
■
Do not pull or carry by cord, use cord as a handle,
close a door on cord, or pull cord around sharp
edges or corners. Do not run appliance over cord.
Keep cord away from heated surfaces.
■
Do not unplug by pulling on cord. To unplug, grasp
the plug, not the cord.
■
Do not handle vacuum cleaner or plug with
wet hands.
■
Do not put any object into openings. Do not use with
any opening blocked; keep openings free of dust,
lint, hair, and anything that may reduce air flow.
■
Keep hair, loose clothing, fingers, and all parts of
body away from openings and moving parts.
appliance, basic
■
Turn off all controls before plugging or unplugging
vacuum cleaner.
■
Use extra care when cleaning stairs.
■
Unplug before attaching the TurboBrush.
■
Do not pick up flammable materials (lighter fluid,
gasoline, kerosene, etc.) or use in the presence of
explosive liquids or vapors.
■
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, etc.).
■
Do not use vacuum cleaner in an enclosed space
filled with vapors given off by oil base paint, paint
thinner, some moth proofing substances, flammable
dust, or other explosive or toxic vapors.
■
Do not pick up hard or sharp objects such as
glass, nails, screws, coins, etc.
■
Do not pick up anything that is burning or smoking,
such as cigarettes, matches, or hot ashes.
■
Do not use without filters in place.
■
Use only on dry, indoor surfaces.
■
Keep appliance on a level surface.
■
Do not carry the vacuum cleaner while it is running.
■
Brush may unexpectedly restart. Unplug from
outlet when cleaning or servicing.
SAVE THESE
INSTRUCTIONS FOR
FUTURE USE
THIS APPLIANCE HAS
A POLARIZED PLUG.
To reduce the risk of electric shock, this appliance has a
polarized plug (one blade is wider than the other). This plug
will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a proper outlet.
Do not change the plug in any way.
This model is for household use only.
www.bissell.com 800.237.7691
3
Product view
Power Switch
TurboBrush
Screen
Dirt Container
Upper Handle
Hose
®
Release Button
Carrying Handle
Brush Switch
Filter Door Latch
HEPA Filter
Cartridge (inside)
Quick Release™
Cord Wraps
Power Cord
Crevice Tool
Headlight
Height
Adjustment
Dial
Furniture Protection
Guard
Brush
Handle Release
Pedal
www.bissell.com 800.237.7691
4
Filter Tray (foam
filter inside)
Hose Collar
Brush Window
Upholstery Brush
Lower Hose Clip
Hose
Wand
Wand Base
Diverter
Telescoping
Extension
Wand
Foot Hose
Assembly
Tool required: Phillips screwdriver
1. Slide upper handle onto lower handle. Insert
one screw into hole marked with an arrow
and tighten until snug.
2. Attach hose by lining up the tabs on the
collar with the corresponding notches on
the back of the vacuum as shown. Turn
clockwise to lock the hose into place.
3. Wrap the hose by routing it down and into
the lower hose clip then up and over the top
of the handle. Insert the hose wand fully into
the hose base.
Note: It is important that the hose is fully
inserted into the base for the suction air to
be directed properly to the foot during floor
vacuuming.
4. Store TurboBrush on the front of the handle
by aligning the slot at the bottom with the
tab and snapping into place.
5. Place crevice tool inside telescoping extension
wand. Store tools on vacuum as shown.
CAUTION:
Do not plug in your
vacuum cleaner until
you are familiar with
all instructions and
operating procedures.
1
3
2
4
5
www.bissell.com 800.237.7691
5
Operation
Transporting your cleaner
Use the handle on the front to carry the cleaner
or place the cleaner in the upright position and
tip back to roll on the rear wheels.
Releasing the power cord
The upper and lower cord wraps rotate to allow
for quick and easy removal of the power cord.
Fingertip power switch
The power button is located at the top of the
vacuum handle.
To turn cleaner on, press button once.
To turn cleaner OFF, press button again.
Note: The rotating brush will not turn on
unless the unit is in the reclined position
and the brush switch is on.
Handle positions
Use your foot to pull the handle release pedal
back to recline the vacuum cleaner.
www.bissell.com 800.237.7691
6