Bissell CLEANVIEW HELIX 327Y, CLEANVIEW HELIX 70V9 User Manual

®

USER'S GUIDE

32Y7 / 22C1 / 21K3 / 71V9 SERIES

2

Thank You

3

Safety Instructions

4

Product View

Earn BISSELL Rewards!

Register your

product today!

See details on

back page

5

Assembly

6-8

Operations

8-12

Maintenance and Care

13

Troubleshooting

14

Accessories

Replacement Parts

14

14-15

Warranty

16

Product Registration

16

Consumer Services

*product images may vary

Thanks for buying a BISSELL CleanView Helix

We’re glad you purchased a BISSELL vacuum. Everything we know
about floor care went into the design and construction of this
complete, high-tech home cleaning system.

Your carpet cleaner is well made, and we back it with a limited
warranty. We also stand behind it with a knowledgeable, dedicated
Consumer Services department, so, should you ever have a problem,
you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today,
BISSELL is a global leader in the design, manufacture, and service
of high quality homecare products like your carpet cleaner.

Thanks again, from all of us at BISSELL.

Mark J. Bissell
President and Chief Executive Officer

®

2

www.bissell.com 800.237.7691

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical
precautions should be observed, including
the following:

READ ALL INSTRUCTIONS BEFORE USING
UPRIGHT VACUUM

Always connect to a polarized outlet (left slot is
wider than right). Unplug from outlet when not in
use and before conducting maintenance.

appliance, basic

WARNING:

To reduce the risk of fire,
electric shock, or injury:

■

Do not modify the polarized plug to fit a

non-polarized outlet or extension cord.

■

Do not leave vacuum cleaner unattended

when it is plugged in.

■

Unplug from outlet when not in use and

before servicing.

■

Unplug before attaching the TurboBrush Tool.

■

Do not use outdoors or on wet surfaces.

■

Do not allow children to operate vacuum

cleaner or use as a toy.

■

Close attention is necessary when used by

or near children.

■

Do not use for any purpose other than

described in this user’s guide.

■

Use only manufacturer’s recommended

attachments.

■

Do not use with damaged cord or plug.

■

If appliance is not working as it should, has

been dropped, damaged, left outdoors, or
dropped into water, have it repaired at an
authorized service center.

■

Do not pull or carry by cord, use cord as a

handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run
appliance over cord. Keep cord away from
heated surfaces.

■

Do not unplug by pulling on cord. To unplug,

grasp the plug, not the cord.

■

Do not handle vacuum cleaner or plug with

wet hands.

■

Do not put any object into openings. Do not

use with any opening blocked; keep openings
free of dust, lint, hair, and anything that may
reduce air flow.

■

Keep hair, loose clothing, fingers, and all parts

of body away from openings and moving parts.

■



Turn off all controls before plugging or
unplugging vacuum cleaner.

■

Use extra care when cleaning stairs.

■

Do not pick up flammable materials (lighter fluid,
gasoline, kerosene, etc.) or use in the presence
of explosive liquids or vapors.

www.bissell.com 800.237.7691

■

Do not pick up toxic material (chlorine bleach,

ammonia, drain cleaner, etc.).

■

Do not use vacuum cleaner in an enclosed

space filled with vapors given off by oil
base paint, paint thinner, some moth
proofing substances, flammable dust, or
other explosive or toxic vapors.

■

Do not pick up hard or sharp objects such as

glass, nails, screws, coins, etc.

■

Do not pick up anything that is burning

or smoking, such as cigarettes, matches,
or hot ashes.

■

Do not use without filters in place.

■

Use only on dry, indoor surfaces.

■

Keep appliance on a level surface.

■

Do not carry the vacuum cleaner while it

is running.

SAVE THESE
INSTRUCTIONS.
FOR FUTURE USE

THIS APPLIANCE
HAS A
POLARIZED
PLUG.

To reduce the risk of electric shock, this
appliance has a polarized plug (one blade
is wider than the other). This plug will fit in
a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician to install a proper outlet. Do not
change the plug in any way.

This model is for household use only.

3

Product view

product images may vary

Handle

Cord Clip

Hose Clip

TurboBrush
Tool

Power
Cord

Dirt
Container

Filter
Cup

Pre-Motor
Filter

Lock ’n
Seal™ Lever

Height
Adjustment
Knob

Furniture
Protection
Guard

®

Powerfoot

Stretch Hose

Power
Switch

Carry Handle

Crevice Tool

Extension
Wand

HEPA Media
Filter*

Combination
Dusting
Brush/
Upholstery
Tool

Handle Release
Pedal

Headlight
(selected models only)

Quick
Release®
Cord
Wrap

Quick
Reach
Handle

Hose
Wand
Base

Foot
Hose

CAUTION:

Do not plug in your vacuum
cleaner until you are familiar
with all instructions and
operating procedures.

*The filter media, not the vacuum as a whole,
complies with IEST-RP-CC001.5 HEPA standard.

WARNING:

Plastic film can be
dangerous. To avoid danger
of suffocation, keep away
from babies and children.

4

www.bissell.com 800.237.7691

Assembly

The only tool you’ll need to
assemble your vacuum cleaner
is a Phillips head screwdriver.

Attach handle to vacuum

1. Locate the vacuum handle and

remove the screw packet taped to
the base of the handle.

2. Stand the vacuum upright and

slide the base of the handle firmly
into the grooves at the top of the
vacuum body.

3. Check to be sure the handle is fitted

to the vacuum body. If there is a gap
in front, continue to push firmly until
the handle is flush.

4. Insert the screw provided from the

screw packet into the existing hole.
Tighten securely with a screwdriver.

Attach vacuum hose and tools

1. Attach the Twist ‘n Snap™ hose by

lining up the tabs on the base with
the corresponding notches on the
back of the vacuum.

2. Turn the Twist ‘n Snap hose to the

right to lock the hose into place.

3. Grasping the Quick Reach handle,

slide the end of the hose wand
onto the hose wand base. Snap
the hose into the hose clip.

NOTE: The powerfoot will not
suction properly unless the hose
wand is firmly attached.

6.

2.

4.

2.

4.

5.

3.

4.

4. Snap the extension wand and the

crevice tool together into the storage
clip. The crevice tool stores inside
the extension wand and snaps onto
the back of the unit.

5. Snap the combination tool into the

storage clip.

6. Attach the TurboBrush Tool by

aligning the small holes near the
brush roll with the tabs at the
bottom of TurboBrush Tool housing.
Snap TurboBrush Tool into place.

www.bissell.com 800.237.7691

5