Bissell Cleanview Helix 22C1 User Manual
Cleanview
Helix
USER’S GUIDE
22C1 / 21K3 SERIES
3
Safety Instructions
Product View
4
Assembly
5
Operation
6-8
Maintenance and Care
8-12
®
TM
Troubleshooting
13
Consumer Services
14
Accessories
14
Replacement Parts
15
Warranty
16
®
Thanks for buying a BISSELL Cleanview
Helix
™
We’re glad you purchased a BISSELL vacuum. Everything we know about floor
care went into the design and construction of this complete, high-tech home
cleaning system. By purchasing this product you are helping BISSELL with our
commitment to reducing our impact on the environment through an expanding
range of sustainable design efforts.
Your carpet cleaner is well made, and we back it with a limited warranty. We also
stand behind it with a knowledgeable, dedicated Consumer Services
department, so, should you ever have a problem, you’ll receive fast, considerate
assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a
global leader in the design, manufacture, and service of high quality homecare
products like your carpet cleaner.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
2
www.bissell.com 800.237.7691
2
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical
precautions should be observed, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING YOUR
UPRIGHT VACUUM.
Always connect to a polarized outlet (left slot is wider than
right). Unplug from outlet when not in use and before conducting maintenance.
WARNING: To reduce
the risk of fire, electric shock,
or injury:
■
Do not modify the polarized plug to fit a
non-polarized outlet or extension cord.
■
Do not leave vacuum cleaner unattended when it is
plugged in.
■
Unplug from outlet when not in use and
before servicing.
■
Unplug before attaching the TurboBrush.
■
Do not use outdoors or on wet surfaces.
■
Do not allow children to operate vacuum
cleaner or use as a toy.
■
Close attention is necessary when used by or
near children.
■
Do not use for any purpose other than described in this
user’s guide.
■
Use only manufacturer’s recommended
attachments.
■
Do not use with damaged cord or plug.
■
If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped
into water, have it repaired at an authorized
service center.
■
Do not pull or carry by cord, use cord as a handle, close
a door on cord, or pull cord around sharp edges or
corners. Do not run appliance over cord. Keep cord
away from heated surfaces.
■
Do not unplug by pulling on cord. To unplug, grasp
the plug, not the cord.
■
Do not handle vacuum cleaner or plug with
wet hands.
■
Do not put any object into openings. Do not use with any
opening blocked; keep openings free of dust, lint, hair,
and anything that may reduce air flow.
■
Keep hair, loose clothing, fingers, and all parts of body
away from openings and moving parts.
www.bissell.com 800.237.7691
appliance, basic
■
Turn off all controls before plugging or unplugging
vacuum cleaner.
■
Use extra care when cleaning stairs.
■
Do not pick up flammable materials (lighter fluid,
gasoline, kerosene, etc.) or use in the presence of
explosive liquids or vapors.
■
Do not pick up toxic material (chlorine bleach, ammo-
nia, drain cleaner, etc.).
■
Do not use vacuum cleaner in an enclosed space filled
with vapors given off by oil base paint, paint thinner,
some moth proofing substances, flammable dust, or
other explosive or toxic vapors.
■
Do not pick up hard or sharp objects such as glass,
nails, screws, coins, etc.
■
Do not pick up anything that is burning or smoking, such
as cigarettes, matches, or hot ashes.
■
Do not use without filters in place.
■
Use only on dry, indoor surfaces.
■
Keep appliance on a level surface.
■
Do not carry the vacuum cleaner while it
is running.
SAVE THESE
INSTRUCTIONS FOR
FUTURE USE
THIS APPLIANCE
HAS A POLARIZED
PLUG.
To reduce the risk of electric shock, this appliance has a
polarized plug (one blade is wider than the other). This plug
will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a proper outlet.
Do not change the plug in any way.
This model is for household use only.
3
Product view
Handle
Cord Clip
Hose Clip
TurboBrush
Dirt Container
Filter Cup
Lock ’n Seal
Lever
Headlight
Height
Adjustment
Knob
®
Power Cord
™
Furniture Protection Guard
Hepa Media Filter
Powerfoot
Stretch Hose
Carry
Handle
Crevice Tool
Extension Wand
Combination
Dusting Brush/
Upholstery Tool
Handle Release
Pedal
Quick Release
Cord Wrap
Hose
Wand
Hose
Wand Base
Foot Hose
®
CAUTION:
Do not plug in your vacuum
cleaner until you are familiar
with all instructions and
operating procedures.
www.bissell.com 800.237.7691
4
WARNING:
Plastic film can be
dangerous. To avoid danger
of suffocation, keep away
from babies and children.
Assembly
The only tool you’ll need to assemble your vacuum cleaner is a Philips head screwdriver.
Attach handle to vacuum
1. Locate the vacuum handle and remove
the screw packet taped to the base of the
handle.
2. Stand the vacuum upright and slide the base
of the handle firmly into the grooves at the
top of the vacuum body.
3. Check to be sure the handle is fitted to the
vacuum body. If there is a gap in front, continue to push firmly until the handle is flush.
4. Insert the screw provided from the screw
packet into the existing hole. Tighten securely with a screwdriver.
Attach vacuum hose and tools
1. Attach the Twist ‘n Snap™ hose by lining up
the tabs on the base with the corresponding
notches on the back of the vacuum.
2. Turn the Twist ‘n Snap hose to the right to
lock the hose into place.
3. Grasping the Quick Reach handle, slide the
end of the hose wand onto the hose wand
base. Snap the hose into the hose clip.
NOTE: The Powerfoot will not suction
properly unless the hose wand is
firmly attached.
4. Snap the extension wand and the crevice
tool together into the storage clip.
2.
4.
2.
4.
5.
3.
6.
4.
5. Snap the combination tool into the storage
clip.
6. Attach the TurboBrush by aligning the small
holes near the brush roll with the tabs at
the bottom of TurboBrush housing. Snap
TurboBrush into place.
www.bissell.com 800.237.7691
5
Loading...