USER'S GUIDE
86T3 & 40M1 SERIES
2
Thank You
3
Safety Instructions
4-5
Product View
Earn BISSELL Rewards!
Register your
product today!
See details on
back page
6
6-12
13-15
16
17
18
19
20
20
Assembly
Operations
Maintenance and Care
Troubleshooting
Replacement Parts
Accessories
Warranty
Product Registration
Consumer Services
Thanks for buying a BISSELL Deep Cleaner
Thanks for buying a BISSELL Big Green Clean Machine. We’re glad
you purchased a BISSELL deep cleaner. Everything we know about
floor care went into the design and construction of this complete,
high-tech home cleaning system.
Your BISSELL Big Green Clean Machine is well made, and we back
it with a limited five year warranty. We also stand behind it with
a knowledgeable, dedicated Consumer Services department, so,
should you ever have a problem, you’ll receive fast, considerate
assistance.
My great-grandfather invented the floor sweeper in 1876. Today,
BISSELL is a global leader in the design, manufacture, and
service of high quality homecare products like your Big Green
Clean Machine.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman, President & CEO
2
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical
observed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
YOUR BIG GREEN CLEAN MACHINE.
WARNING:
To reduce the risk of fire,
electric shock, or injury:
■
Do not immerse.
■
Use only on surfaces moistened by cleaning process.
■
Always connect to a properly grounded outlet.
■
See Grounding Instructions.
■
Unplug from outlet when not in use and before conducting
maintenance or troubleshooting.
■
Do not leave machine when it is plugged in.
■
Do not service machine when it is plugged in.
■
Do not use with damaged cord or plug.
■
If appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, have it repaired
at an authorized Service Center.
■
Use indoors only.
■
Do not pull or carry by cord, use cord as a handle, close door
on cord, pull cord around sharp corners or edges, run appliance
over cord, or expose cord to heated surfaces.
■
Unplug by grasping the plug, not the cord.
■
Do not handle plug or appliance with wet hands.
■
Do not put any object into appliance openings, use with
blocked opening, or restrict air flow.
■
Do not expose hair, loose clothing, fingers or body parts to
openings or moving parts.
■
Do not pick up hot or burning objects.
■
Do not pick up flammable or combustible materials (lighter
fluid, gasoline, kerosene, etc.) or use in the presence of
explosive liquids or vapor.
■
Do not use appliance in an enclosed space filled with vapors
given off by oil base paint, paint thinner, some moth proofing
substances, flammable dust, or other explosive or toxic vapors.
■
Do not pick up toxic material
(chlorine bleach, ammonia, drain cleaner, gasoline, etc.).
■
Do not modify the 3-prong grounded plug.
■
Do not allow to be used as a toy.
■
Do not use for any purpose other than described in this
user’s guide.
■
Do not unplug by pulling on the cord.
■
Use only manufacturer’s recommended attachments.
■
Always install float before any wet pick up operation.
■
Use only cleaning products formulated by BISSELL for use in
this appliance to prevent internal component damage. See the
cleaning fluid section of this guide.
■
Keep openings free of dust, lint, hair, etc.
■
Do not point attachment nozzle at people or animals
■
Keep appliance on a level surface.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
appliance, basic precautions should be
■
Do not use without intake screen filter in place.
■
Turn off all controls before unplugging.
■
Unplug before attaching the TurboBrush®.
■
Be extra careful when cleaning stairs.
■
Close attention is necessary when used by or near children.
SAVE THESE
INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD AND
COMMERCIAL USE.
GROUNDING
INSTRUCTIONS
This appliance must be connected to
a grounded wiring system. If it should
malfunction or break down, grounding
provides a safe path of least resistance
for electrical current, reducing the risk of
electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only
be plugged into an outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
Grounded
Outlets
Grounding Pin
WARNING:
Improper connection of the equipmentgrounding conductor can result in a risk
of electrical shock. Check with a qualified
electrician or service person if you aren’t
sure if the outlet is properly grounded.
DO NOT MODIFY THE PLUG. If it will
not fit the outlet, have a proper outlet
installed by a qualified electrician. This
appliance is designed for use on a nominal 120-volt circuit, and has a grounding
attachment plug that looks like the plug in
the drawing above. Make certain that the
appliance is connected to an outlet having the same configuration as the plug.
No plug adapter should be used with this
appliance.
3
Product view
Tank Carry Handle
Spray Trigger
Power Cord
Adjustable
Handle
Hose Latch
Dirty Water Tank
Front Carry Handle
Flow Indicator
Solution Hose
Connection
Clean Water Tank
4
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Product view
Spray Trigger
Power Switch
Upper Handle
Release
Back Carry Handle
Handle Detent
WARNING: To reduce the risk
of fire and electric shock due to internal
component damage, use only BISSELL cleaning
fluids intended for use with the deep cleaner.
Non-BISSELL cleaning solutions may harm the
machine and void the warranty.
Cleaning fluid
Keep plenty of genuine BISSELL 2X formula on hand so you can clean and protect whenever
it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL
cleaning solutions may harm the machine and will void the warranty.
BISSELL
2X Fiber
Cleansing
Formula with
Scotchgard™
Protection
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
BISSELL
2X MultiAllergen
Removal
Formula with
Scotchgard™
Protection
BISSELL
2X Pet Stain
and Odor
Removal
Formula with
Scotchgard™
Protection
BISSELL
2X Natural
Orange
Extract
Formula with
Scotchgard™
Protection
BISSELL
2X Lavender
Essence
Formula with
Scotchgard
Protection
BISSELL
2X
Professional
Deep
™
Cleaning
Formula with
Scotchgard™
Protection
BISSELL
Tough
Stain
PreCleaner
5
Assembly
Your BISSELL Big Green Clean Machine
comes with no assembly required!
Operations
Before you clean
1. Move furniture to another area if clean-
ing the entire room (optional.)
2. Vacuum area with a dry vacuum cleaner
thoroughly before deep cleaning.
3. Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the
corner farthest from your exit.
4. Pretreating (optional) is recommended
to improve cleaning effectiveness for
heavily soiled carpet in high traffic areas
such as entryways and hallways.
A. Spray the BISSELL Tough Stain
Pre-Treat formula onto high traffic
areas, soiled areas or stains.
B. Allow to penetrate for at least three
minutes.
C. Clean as normal using your BISSELL
Big Green Clean Machine, following
the instructions on page 7.
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggravate this condition. Please see
Stain Removal instructions on
page 12.
6
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Operations
Carpet cleaning
1. Remove dirty water tank. Pull dirty water
tank handle to upright position and lift up
to remove dirty water tank.
2. Lift clean water tank from the base of
machine.
A. Unscrew cap on top of the clean water
tank. Fill tank to FILL line with clean,
hot tap water.
B. Measure BISSELL formula using cap
on tank. Fill cap to line twice for each
full tank of water. Always use genuine
BISSELL formulas to maximize cleaning
and for the safety of your machine
C. Screw cap back onto clean water tank
and place tank onto base of the machine.
3. Replace dirty water tank securely on top of
the clean water tank and push handle back
to lock into place.
4. Plug into a proper outlet and turn the
power switch to the ON ( I ) position.
5. Detent handle by pushing down on the
green lever on the back of the machine
while pulling back.
6. Cleaning strokes. While pressing the
trigger, make one slow forward wet pass
and another back. Let the formula and
DirtLifter PowerBrushes do the work for you.
Note: Your machine is equipped
with a circuit breaker that will
automatically shut off the brush if a
large or loose object is caught in the
brush roll. If that happens, be sure
to unplug your machine, remove the
foreign object and then plug machine
in to reset the circuit breaker.
1.
2. 2A.
2C.
3.
5.
1.
3.
Keep plenty of genuine BISSELL 2X
formula on hand so you can clean
whenever it fits your schedule. Always
use genuine BISSELL deep cleaning
formulas. Non-BISSELL cleaning
solutions may harm the machine and
void the warranty.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
7
Operations
Carpet cleaning continued
7. Cleaning strokes. Release the trigger
and make one slow forward and backward pass over the same area to remove
any residual dirty water and aid in drying.
Repeat cleaning passes until solution being
pulled up appears clean. Continue passes
without pressing the trigger until you can’t
see any more water being pulled up.
8.
8. Remove the dirty water tank by pulling the
handle to the upright position and lift up.
Carry the tank like a bucket to a utility sink
or outside where you will dispose of the
dirty water.
9. Unlatch the top of the tank from the bottom
by pushing the handle all the way forward
and lifting the top off. Pour dirty water into
the sink.
Note: You may notice hair and debris
deposits on the carpet or in the tank
that were loosened by the cleaning
action (especially with newer carpets
that have never been deep cleaned
before). This debris should be picked
up and thrown away.
10. Fill the clean water tank with clean hot tap
water and follow instructions 2 - 7 to
continue cleaning.
9.
9.
CAUTION:
Do not overwet. Take care not to
run over loose objects or edges
of area rugs. Stalling brush may
result in premature belt failure.
8
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Operations
Adsdfdd ghg bvh
cvbbj jkn hnbj jkvh
gcghhjj jhffhl kllgh
Cleaning with attachments
Your Big Green Clean Machine may
have come with a hose and at least
one attachment for cleaning stairs,
upholstery and more.
1. Important! If using to clean upholstery,
check upholstery tags.
A. Check manufacturer’s tag before
cleaning. “W” or “WS” on the tag
means you can use your Big Green
Clean Machine. If the tag is coded
with an “X” or an “S” (with a diagonal stripe through it) or says “Dry
Clean Only”, do not proceed with
any deep cleaning machine. Do not
use on velvet or silk. If manufacturer’s
tag is missing or not coded, check
with your furniture dealer.
B. Check for colorfastness in an incon-
spicuous place.
C. If possible, check upholstery stuffing.
Colored stuffing may bleed through
fabric when wet.
D. Plan activities to allow upholstery
time to dry.
E. Vacuum thoroughly to pick up loose
debris and pet hair. Use a vacuum
with a brush attachment and a crevice tool to clean in fabric folds.
Manufacturer’s tag
2. Fill the clean water tank. Lift clean water
tank from the base of machine.
A. Unscrew cap on top of the clean
2. 2A.
water tank. Fill tank to FILL line with
clean, hot tap water.
B. Measure BISSELL formula using cap
on tank. Fill cap to line twice for
each full tank of water. Always use
genuine BISSELL formulas to
maximize cleaning and for the safety
2C.
of your machine.
C. Screw cap back onto clean water tank
and place tank onto base of the machine.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
9
Operations
Cleaning with attachments continued
3. Attach Hose
A. Connect solution hose to the hose
connection point on unit, next to flow
indicator. Insert hose and turn
clockwise until locked into place.
B. Open hose latch on the front of the
unit and insert hose into place. Turn
clockwise until locked into place.
4. Attach the cleaning tool to the end of the
hose.
5. Clean by pressing the red trigger to
spray solution onto the area to be
cleaned. Slowly move the tool back and
forth over the soiled surface. Release the
trigger to suction soiled water. Continue
to clean in the area, working in small
sections, until no more dirt can be
removed. Caution: Do Not Overwet
6. Remove and rinse tool in clean running
water. Let dry completely.
7. Remove and rinse hose in clean, running
water. Let dry completely.
8. Empty dirty and clean water tanks and rinse
following instructions on page 13.
3B. 3B.
3A.
4.
5.
10
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Operations
Cleaning with Oxy Gen2 tool
Select models only
1. Follow instruction on page 10 to attach
hose to machine.
2. To pretreat heavy traffic areas:
A. Pour Oxy GEN2 formula into the
Oxy GEN2 Tool and attach tool to
your machine’s hose.
B. Hold tool 2-4 inches above the floor
and press red trigger to spray onto
carpet.
C. Wait for 3-5 minutes then clean as
normal using your machine
3.
To use as a spot and stain tool on carpet:
A. Pour Oxy GEN2 formula into the
Oxy GEN2 Tool and attach tool to
your machine’s hose.
B. Hold tool 1-2 inches above the floor
and press trigger to spray onto
carpet. Spray generously, but do not
overwet the carpet.
C. Move the bristles back and forth
over the spot.
D. Suction up solution/stain
immediately with your tool.
E. Repeat as needed.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
11
Operations
Stain Removal
Do Not Delay! Attending to an
accident soon after it occurs ensures
the most optimal clean. Leaving it
for an extended period of time may
cause it to set and become permanent
1. Blot up liquids with an absorbent cloth
or paper towels. White materials are
recommended because certain dyes may
bleed and make the stain worse.
2. Gently scrape up any semi-solids with a
spoon or spatula. Do not use a knife or
other utensil with sharp edges because it
could damage the carpet or upholstery.
3. If the area has dried, remove the remain-
ing semi-solids and residue with a
sweeper or vacuum.
4. Be sure to test any spot removal formulas
in an inconspicuous area first. This is
important as some dyes and materials could be damaged or discolored
by cleaning solvents. If such a change
should occur, try a different solution or
call a professional.
5. If cleaning on Berber carpeting, gently
run your machine over a hidden area. If
no fuzzing occurs, continue cleaning in
soiled area.
6. Using the BISSELL Tough Stain
PreCleaner, spray evenly over soiled
area. DO NOT OVERWET. Wait 3-5
minutes. Gently work the solution by
blotting area with a clean, damp, color
safe cloth.
7. Clean using the unit or the hose with
attachment.
12
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Maintenance and care
Machine storage
Once your cleaning is complete, make
sure both the dirty and clean water
tanks are emptied, rinsed out and
dried before the next use.
Note: Store cleaner in a protected,
dry area. Since this product uses
water, it must not be stored where
there is a danger of freezing. Freezing
will damage internal components and
void the warranty.
Machine care
For best results, a few simple steps can
assure your machine is well maintained
after your cleaning is complete
1. Turn power OFF (0). Unplug the machine
and wrap the power cord.
2. After emptying the clean and dirty
water tanks, rinse them out with running
hot tap water.
3. The top half of the dirty water tank can also
be rinsed clean through the nozzle area.
4. To clean attachments, remove from hose
and rinse in clean, running water and let
dry. Clean the hose by removing it from
the machine and let running tap water
run through both ends.
5. After carpet is dry, vacuum again to
remove hair and fuzz.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
13
Maintenance and care
Belt removal and replacement
1. Turn off the machine and unplug it from
the outlet.
2. Remove the dirty and clean water tanks
from the base of the machine.
3. While standing behind the unit, lay the
unit on its’ side (cord side up)
4. Looking at the bottom of unit, find
the back center of the brush carriage
where the carriage latch is located. It
is between the brush assembly and the
front wheels.
5. Pull brush carriage towards you with
one hand until it stops, then pinch the
carriage latch with other hand while
pulling the carriage towards you. The
carriage should swing out to access belt
cover.
6. Remove three screws from cover. Lift and
remove to access brush carriage.
7. Turn the belt inward towards the large
pulley while lifting out.
8. Place new belt over small pulley first and
then slip the belt over the large pulley.
WARNING:
To reduce the risk of fire, electric
shock, or injury,turn power
OFF and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
3.
4.
6A.
5.
6B.
9. Replace the brush carriage and screws.
10. Push brush carriage back into place
making sure the carriage latch locks
back into place.
14
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
7.
9.
8.
10.
Maintenance and care
Brush removal and replacement
1. Turn OFF (0) the machine and unplug
from the outlet.
2. Remove the dirty and clean water tanks
from the base of the machine.
3. While standing behind the unit, lay the
unit on its’ side (cord side down).
4. Looking at the bottom of the unit, find the
center of the brush carriage where the
carriage latch is located. It is between
the brush assembly and wheels.
5. Pull the brush carriage towards you with
one hand until it stops. Pinch the carriage latch with the other hand while
pulling the carriage towards you. The
carriage should swing out to access
brush end cover.
6. Remove three screws from endcap. Pull
endcap off to release brush roll.
7. With cover removed, the brush comes
out easily by tilting the loose end out of
the carriage.
8. To replace the brush roll back into the
unit, place the large open end of the
brush onto the carriage and tilt opposite
end back into place. (same image as 7,
just change arrow direction)
4.
5.
6A.
7.
3.
6B.
8.
9. With the brush sitting relatively straight
up and down by itself, place endcap
back on top and replace three screws.
The brush will need to be held and centered to the cover while placing it back
on.
10. Spin the brush by hand to make sure it
turns freely with some minor resistance
from the motor. Push brush carriage back
into place with a light pull against the
lock.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
9. 10.
15
Troubleshooting
WARNING:
To reduce the risk of fire, electric
shock, or injury,turn power
OFF and disconnect plug from
electrical outlet before performing
Reduce Spray or No Spray
Possible causes Remedies
1. Water tank may be empty 1. Fill clean tank with hot tap water
2. Tank may not be seated completely 2. Turn power OFF (0). Remove and reseat tank.
3. Pump may have lost prime. 3. Turn power OFF (0) and then back ON (I). Wait one minute,
then depress trigger
4. Debris filter on base is clogged 4. Use hand to remove debris
DirtLifter® PowerBrush does not turn
Possible causes Remedies
1. The belt is off or broken 1. Turn power OFF ( O ) and unplug unit from outlet. Follow
instructions on page 14
2. The unit is in the upright position 2. Brushes only rotate when unit is reclined using the
detent pedal
3.
Circuit breaker on machine may have tripped
to see if foreign object is caught in brush roll. Remove
object. Plug machine in to reset circuit breaker
3. Turn the machine OFF ( O ) and unplug from outlet. Check
Cleaner not picking up solution
Possible causes Remedies
maintenance or troubleshooting.
1. Tanks may not be seated properly 1. Pick up both the clean and dirty water tanks and reseat
them so they fit snuggly on the unit
2. Clean water tank is empty 2. Check fluid levels in clean water tank and refill if necessary
3. Dirty water tank has picked up the maximum amount 3. Empty dirty water tank. Refill clean water tank with water
of dirty water the red float door has closed and formula. Place both tanks back onto unit
4. Red float “door” in the tank may have closed as a result of 4. Turn the machine OFF(0), allowing red float door to release
bumping an object or moving machine back and forth too quickly into the open position,. Turn the unit back ON (I) to
continue cleaning. Be sure your forward and backward
strokes are completed at a slower pace
5. Front nozzle of machine is clogged 5. Use fingers to remove any debris from this area
6. Upper body filter is clogged 6. Use fingers to remove any debris from this area
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-800-237-7691.
16
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Replacement parts - BISSELL Big Green Clean Machine
Item Part No. Part Name
1 203-7443 Hose assembly
2 203-7451 Float
3 203-7452 Dirty tank assembly
4 203-7453 Dirty tank gasket
5 203-7454 Clean tank assembly
6 120-7455 Clean tank cap assembly
7 203-7456 Nozzle gasket
8 203-7457 Nozzle assembly
9 203-7458 Brush
10 120-7455 Brush endcap
11 203-7460 Belt
1
6
11
2
7
3
8
4
9
5
10
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
17
Accessories
Item Part No. Part Name
1 203-6651 3” Tough Stain Tool
2 203-6652 Powered TurboBrush® Hand Tool
3 203-6653 4” Upholstery Tool
4 203-6654 6" Stair Tool
5 203-6655 Spraying Crevice Tool
6 203-6655 2-in-1 Crevice Tool
7 203-7240 Oxy Gen2 Tool
8 62E5 2X Fiber Cleansing Formula with Scotchgard™ Protection 24 oz.
9 99K5 2X Pet Stain and Odor Removal Formula with
Scotchgard™ Proection 24 oz.
10 89Q5 2X Multi-Allergen Removal Formula with Scotchgard
11 83P3 2X Natural Orange Extract Formula with Scotchgard™
Protection 24 oz.
12 34B5 2X Lavender Essence Formula with Scotchgard™ Protection 24 oz.
13 78H6 2X Professional Deep Cleaning Formula with Scotchgard™ 24 oz.
14 4001 Tough Stain PreCleaner 22 oz.
Protection 24 oz.
™
1
6
2
7 8
3 4
9
5
10
11 12 13 14
For a complete list of replacement parts, cleaning
formulas, and accessories available for your BISSELL
deep cleaner please visit www.bissell.com or contact
BISSELL Consumer Services at 800.237.7691.
18
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Warranty - BISSELL Big Green Clean Machine
This warranty gives you specific legal rights, and you may also have other rights which may
vary from state to state. If you need additional instruction regarding this warranty or have
questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail,
telephone, or regular mail as described below.
Limited Five Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product
BISSELL Homecare, Inc. will repair or replace (with new or remanufactured components or
products), at BISSELL’s option, free of charge from the date of purchase by the original
purchaser, for five year any defective or malfunctioning part.
See information below on "If your BISSELL product should require service".
This warranty applies to product used for personal, and not commercial or rental service. This
warranty does not apply to fans or routine maintenance components such as filters, belts, or
brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any
other use not in accordance with the user's guide is not covered.
If your BISSELL product should require service:
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your
area.
If you need information about repairs or replacement parts, or if you have questions about
your warranty, contact BISSELL Consumer Services.
Website or E-mail:
www.bissell.com
Or Call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. - 10 p.m. ET
Saturday 9 a.m. - 8 p.m. ET
Or Write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids, MI 49501
ATTN: Consumer Services
BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT
EXCEED THE PURCHASE PRICE OF THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR
WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED
ABOVE.
Some states do not allow limitations on how long an implied warranty last so the above limitation
may not apply to you.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
19
Don't forget to register your product!
Registering is quick, easy and offers you benefits over the lifetime of your product.
You’ll receive:
BISSELL Rewards Points
Automatically earn points for discounts and free shipping on future purchases.
Faster Service
Supplying your information now saves you time should you need to contact us with
questions regarding your product.
Product Support Reminders and Alerts
We’ll contact you with any important product maintenance reminders and alerts.
Special Promotions
Optional: Register your email to receive notice of offers, contests, cleaning tips and more!
Visit www.bissell.com/registration now!
BISSELL consumer services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. — 10 p.m. ET
Saturday 9 a.m. — 8 p.m. ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It
provides proof of purchase date in the event of a
warranty claim. See Warranty on page 11 for details.
©2010 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 120-4216
Rev 5/10
Visit our website at:
www.bissell.com
20
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Scotchgard is a trademark of 3M
Loading...