Bissell 8852 Quick Start Manual

Carpet Cleaning

1. While pressing the trigger, make one slow
forward wet pass and another one back

2. Release the trigger and make one slow forward
and backward pass over the same area. Repeated
passes will help aid in dry time

3. Continue passes until cleaning area is complete

4. When the formula and water solution is empty,

it is time to empty the dirty water tank

5. Empty dirty water by removing tank from base
of machine. Carry to utility sink to dispose of
water. Unlatch top of tank and pour dirty water
through rectangle shaped opening in corner

6. Refill as needed, following steps 4 & 5 under
“Before you begin cleaning”

Cleaning with Attachments

1. Make sure handle of machine is locked in

upright position and the ReadyTools™ Dial is
turned towards Tools.

2. Attach the cleaning tool to the end of the hose

3. Clean by pressing the trigger to spray solution

onto the area to be cleaned

4. Slowly scrub the tool back and forth over the
soiled surface

5. Tilt the tool forward and release spray trigger
to suction liquid

5.

6.

4.

WARNING

Refer to the enclosed user guide for complete
instructions and important safety notices.

1 2 3

DEEPCLEAN

™

ESSENTIAL

QUICK START GUIDE

8852 Series

4

We c’t wait to ar from y!

Rate this product and let us (and millions

of your closest friends) know what you think!

www.BISSELL.com

For information about repairs or replacement parts,
or questions about your warranty, call:

BISSELL Consumer Care 1-800-237-7691

Monday – Friday 8 am - 10 pm ET
Saturday 9 am - 8 pm ET
Sunday 10 am - 7 pm ET

Or visit the BISSELL website www.bissell.com

©2013 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 160-1420 Rev 02/13
Costco Item# 936631

Package Cnts

1 Machine Base & Tank-in-Tank System
2 Upper Handle
3 5 screws (2 long, 3 short) - taped to handle
4 Tough Stain Tool

Phillips head screw driver is needed for assembly

Color and pack-ins vary by model

1. Slide handle assembly onto
lower body and secure with two
long screws.

2. Attach upper hose rack to back
of handle assembly by guiding
the hook up into slot location and
pressing firmly upward until it is
seated flush with the back of the
machine. Secure 1 short screw
through the hole in the bottom
of the upper hose and cord rack.

3. Attach lower hose rack by
guiding the hook up into slot
location and pressing firmly
upward until it is seated flush
with the back of the machine.
Secure 2 short screws through
holes on either side of the
bottom hose and cord rack.

4. Attach Tough Stain tool to
end of hose.

5. Wrap flex hose around hose and
cord rack (as shown) and secure
it into notched out holder. Wrap
cord around opposite side of hose
and cord rack.

6. Keep flex hose locked in place
with hose secure latch.

7. Place tank in the bottom of
the machine.

2.

1.

5.

1b.

3.

Before you begin cleaningAssembly

1. Move furniture to another area
if cleaning an entire room

2. Remove large dirt and debris
from carpet (See User’s Guide for
more details)

3. Pre-treat spots & stains and
heavy traffic areas (optional –
see User’s Guide)

4. Fill the clean water tank

4a. Unlatch the top by lifting up on

the latch at the back side of the tank.

4b. Remove the top

4c. Fill with hot tap water leaving

space at the top for formula (do
not boil or microwave water). Pour

2.5 ounces of formula into the heavy
duty bladder (fill the included
measuring cup twice).

4d. Re-attach top by hooking the
front of the lid in then locking in the
latch on the back side of the tank.

5. Plug into outlet, and turn the power
switch on

NOTE: Heatwave Technology™ helps
keep hot water hot while the machine
is in use. Simply turn the machine on
to activate Heatwave Technology.

4b.

4c.

4d.

5.

YOUR ASSEMBLY IS NOW COMPLETE.

For complete user's guide, visit www.BISSELL.com