Bissell 82H5 User Manual

USER’S GUIDE

82H5 SERIES 220-240V

3

Safety Instructions

4

Product View

5-6

Assembly

6-7

Operation

8-12

Maintenance and Care

13-14

Troubleshooting

14

Consumer Services

15

Replacement Parts

16

Warranty

PowerForce

™

Turbo

BAGLESS

ug110-4049_82H5_1008.indd 1ug110-4049_82H5_1008.indd 1 10/14/08 2:39:30 PM10/14/08 2:39:30 PM

2

Thank you for buying a BISSELL PowerForce

™

Turbo Bagless Vacuum

2

www.bissell.com

We’re glad you purchased a BISSELL PowerForce Turbo Bagless Vacuum.
Everything we know about floor care went into the design and construction of
this powerful, high-tech home vacuuming system.

Your BISSELL PowerForce Turbo Bagless is well made, and we back it with a
limited one year warranty. We also stand behind it with a knowledgeable,
dedicated Consumer Services Department, so, should you ever have a problem,
you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a
global leader in the design, manufacture, and service of high quality homecare
products like your BISSELL PowerForce Turbo Bagless.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

Chairman, President and CEO

ug110-4049_82H5_1008.indd 2ug110-4049_82H5_1008.indd 2 10/14/08 2:39:36 PM10/14/08 2:39:36 PM

3

www.bissell.com

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical

appliance,
basic precautions should be observed,
including the following:

READ ALL INSTRUCTIONS
BEFORE USING YOUR
UPRIGHT VACUUM.

WARNING: To reduce

the risk of fire, electric shock,
or injury:

■

Use indoors only.

■

Do not leave machine when it is plugged in.

■

Do not use with damaged cord or plug.

■

If appliance is not working as it should, has been

dropped, damaged, left outdoors, or dropped into water,
return it to a service agent.

■

Do not handle unit with wet hands.

■

Do not pull or carry by cord, use cord as a handle, close

door on cord, pull cord around sharp corners or edges, run
appliance over cord, or expose cord to heated surfaces.

■

Do not unplug by pulling on cord. Unplug by

grasping plug.

■

Do not run appliance over cord.

■

Do not handle plug or appliance with wet hands.

■

Do not expose hair, loose clothing, fingers or body

parts to openings or moving parts.

■

Do not pick up hot or burning objects such as

cigarettes, matches, or hot ashes.

■

Do not pick up flammable or combustible materials (lighter

fluid, petrol, kerosene, etc.) or use in the
presence of explosive liquids or vapour.

■

Do not use appliance in an enclosed space filled with

vapours given off by oil base paint, paint
thinner, some moth proofing substances, flammable dust,
or other explosive or toxic vapours.

■

Not intended for use by young children or infirm

persons without supervision.

■

Young children should be supervised to ensure that they do

not play with the appliance.

■

Remove plug from electrical outlet before cleaning or

maintaining the appliance.

■

If the supply cord is damaged, it must be replaced by

the manufacturer or its service agent in order to avoid a
hazard.

■

Do not pick up toxic material (chlorine bleach,

ammonia, drain cleaner, petrol, etc.).

■

Do not allow to be used as a toy.

■

Do not use for any purpose other than described in

this User’s Guide.

■

Use only manufacturer’s recommended attachments.

■

Do not use with any opening blocked; keep free of

dust, lint, hair, and anything that may reduce air flow.

■

Keep appliance on a level surface.

■

Turn off all controls before unplugging.

■

Be extra careful when cleaning stairs.

■

This appliance is provided with double

insulation. Use only identical replacement parts.

■

Do not use without debris tank and/or filters in place.

■

Pay close attention when working

around children.

SAVE THESE
INSTRUCTIONS.

THIS MODEL IS FOR HOUSEHOLD USE ONLY.

IMPORTANT

FOR OPERATION ON A 220-240 VOLT A.C. 50/60 Hz
POWER SUPPLY ONLY.

FOR RESIDENTS OF THE
UNITED KINGDOM ONLY

If your appliance is fitted with a nonrewireable BS 1363
plug it must not be used unless a 13 amp (ASTA approved
to BS 1362) fuse is fitted in the carrier contained in
the plug. (Spares may be obtained from your BISSELL
supplier). If for any reason the plug is cut off, it must be
disposed of, as it is an electric shock hazard should it be
inserted into a mains socket.

ug110-4049_82H5_1008.indd 3ug110-4049_82H5_1008.indd 3 10/14/08 2:39:36 PM10/14/08 2:39:36 PM

4

www.bissell.com

CAUTION:

Do not plug in your
vacuum cleaner until
you are familiar with
all instructions and
operating procedures.

Handle

TurboBrush

™

Powerfoot

Furniture Protection Guard

Height
Adjustment
Knob

Product view

Carrying
Handle

Power Switch

Crevice Tool

Quick Reach™
Handle

Handle
Release
Pedal

Deluxe Stretch
Hose

Extension Wand

Combination
Dusting Brush/
Upholstery Tool

Hose Wand

Hose
Wand Base

Foot Hose

Hose Clip

Cord Clip

Twist 'n Snap

™

Hose Connector

HEPA Media
Post-Motor
Filter

Pre-Motor
Filter

Headlight

Lock ’n Seal

™

Lever

Inner and Outer
Circular Filters

Upper Tank

Quick Release

™

Cord Wrap

Power Cord

Primary
Separator

Dirt Container

Filter Cup

ug110-4049_82H5_1008.indd 4ug110-4049_82H5_1008.indd 4 10/14/08 2:39:39 PM10/14/08 2:39:39 PM

5

www.bissell.com

How to use this guide

Assembly

This User’s Guide has been designed to help
you get the most satisfaction from your BISSELL
PowerForce Turbo Bagless. You’ll find assembly and
operating instructions, safety precautions, as well
as maintenance and troubleshooting instructions.
Please read this User's Guide thoroughly before
assembling your vacuum cleaner.

Pay particular attention to the product diagram,
assembly instructions, and part names. Locate
and organize all parts before assembly. Following
this User’s Guide will greatly enhance your ability
to get the most performance from your BISSELL
PowerForce Turbo Bagless for many years.

The only tool you’ll need to assemble your
vacuum cleaner is a screwdriver.

Attach handle to vacuum

1. Locate the vacuum handle and remove the
screw packet taped to the base of the handle.

2. Stand the vacuum upright and place the handle
on the top of the vacuum body.

3. Insert the screws into the existing holes on
each side. Tighten securely with a screwdriver.

Attach vacuum hose and tools

1. Attach the Twist ‘n Snap hose by lining up
the tabs on the base with the corresponding
notches on the back of the vacuum.

2. Turn the Twist ‘n Snap hose to the right to lock
the hose into place.

3. Grasping the Quick Reach handle, slide the
end of the hose wand into the hose wand
base. Snap the hose into the hose clip.

NOTE: The powerfoot will not operate
effectively unless the hose wand is
firmly attached.

4. Slide the extension wand and the crevice tool

together into the storage clip on the side of
the vacuum.

5. Snap the combination tool into the storage clip
on the back of the vacuum.

6. The TurboBrush bracket slides into the front of
the handle. Attach the bracket by
aligning the pegs with the holes on the
handle and pulling down until it locks
into place.

WARNING:

Plastic film can be
dangerous. To avoid danger
of suffocation, keep away
from babies and children.

ug110-4049_82H5_1008.indd 5ug110-4049_82H5_1008.indd 5 10/14/08 2:39:49 PM10/14/08 2:39:49 PM