Bissell 71Y7V Owner's Manual

USER'S GUIDE
71Y7 SERIES
2
Thank You
3
Safety Instructions
4
Product View
Earn BISSELL Rewards!
Register your
product today!
See details on
back page
5
Assembly
6-7
Operations
8-11
12
Febreze® Freshness
13
Troubleshooting
14
Replacement Parts
15
Warranty
16
Product Registration
16
Consumer Care
Thanks for buying a BISSELL vacuum
We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.
Your carpet cleaner is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your carpet cleaner.
Thanks again, from all of us at BISSELL.
Mark J. Bissell President & CEO
2
www.bissell.com 800.237.7691
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical precautions should be observed, including the following:
READ ALL INSTRUCTIONS BEFORE USING UPRIGHT VACUUM
Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance.
appliance, basic
WARNING:
To reduce the risk of fire, electric shock, or injury:
Do not modify the polarized plug to fit a
non-polarized outlet or extension cord.
Do not leave vacuum cleaner unattended
when it is plugged in.
Unplug from outlet when not in use and
before servicing.
Do not use outdoors or on wet surfaces.
Do not allow children to operate vacuum
cleaner or use as a toy.
Close attention is necessary when used by
or near children.
Do not use for any purpose other than
described in this user’s guide.
Use only manufacturer’s recommended
attachments.
Do not use with damaged cord or plug.
If appliance is not working as it should, has
been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.
Do not pull or carry by cord, use cord as a
handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
Do not handle vacuum cleaner or plug with
wet hands.
Do not put any object into openings. Do not
use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
Turn off all controls before plugging or unplugging vacuum cleaner.
■
Use extra care when cleaning stairs.
■
Do not pick up flammable materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapors.
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, etc.).
Do not use vacuum cleaner in an enclosed
space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.
Do not pick up hard or sharp objects such as
glass, nails, screws, coins, etc.
Do not pick up anything that is burning
or smoking, such as cigarettes, matches, or hot ashes.
Do not use without filters in place.
Use only on dry, indoor surfaces.
Keep appliance on a level surface.
Do not carry the vacuum cleaner while it
is running.
SAVE THESE INSTRUCTIONS. FOR FUTURE USE
THIS APPLIANCE HAS A POLARIZED PLUG.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way.
This model is for household use only.
www.bissell.com 800.237.7691
3
Product view
Crevice Tool
Extension Wand
Twist ‘n
Snap Hose
Tool Storage Clips
Cord Clip
Hose Clip
Carrying Handle
Stretch Hose
Quick Release™ Cord Wrap
Quick
®
Reach Handle
Combination Upholstery/ Dusting Brush Tool
Power Cord
Quick Reach Handle
Height Adjustment Knob
Handle
Power Switch
Bag Door
Post-Motor Filter (select models)
Handle Release Pedal
Hose Wand Mount
Powerfoot
Furniture Protection Guard
WARNING:
Do not plug in your vacuum cleaner until you are familiar with all instruc­tions and operating procedures.
4
www.bissell.com 800.237.7691
Assembly
The only tool you’ll need to assemble your vacuum cleaner is a Phillips head screwdriver.
Attach handle to vacuum
1. Stand the vacuum upright and slide
the base of the handle firmly into the grooves at the top of the vacuum body.
2. Check to be sure the handle is fitted
to the vacuum body. If there is a gap in front, continue to push firmly until the handle is flush.
3. Insert one screw from the assembly
packet into the existing hole in the back of the handle. Tighten securely with a screwdriver.
Attach vacuum hose and tools
1. Position the hose collar on the back of
the vacuum as shown.
2. Attach the hose collar with two screws
from the assembly packet. Tighten securely with a screwdriver.
3. Line up the tabs on the base of the Twist
‘n Snap Hose with the corresponding tab notches on the hose collar as shown. Turn the Twist ‘n Snap Hose to the left to lock the hose into place.
WARNING:
Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.
1.
1.
3.
Hose Collar
4. Grasping the Quick Reach® Handle,
slide the end of the hose wand onto the suction intake opening. Snap the hose into the hose clip.
NOTE: The powerfoot will not
operate effectively unless the hose wand is firmly attached to the suction intake opening.
5. Place the crevice tool inside the
extension wand and slide them into the storage clip as shown.
6. Snap the combination upholstery/
dusting brush tool into the storage clip as shown.
www.bissell.com 800.237.7691
4.
3.
5.
6.
5
Loading...
+ 11 hidden pages