Bissell 69P3-E User Manual

USER'S GUIDE

69P3 SERIES 220-240V

Thank You

Safety Instructions

Product View

Assembly

6-8

Operations

8-13

Maintenance and Care

13-14

Troubleshooting

Replacement Parts

Accessories

Warranty

Consumer Services

Thanks for buying a BISSELL PowerGroom™ Multi Cyclonic vacuum

We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.

Your BISSELL vacuum is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL vacuum.

Thanks again, from all of us at BISSELL.

Mark J. Bissell Chairman, President & CEO

w w w . b i s s e l l . c o m

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical basic precautions should be observed, including the following:

appliance,

READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM.

WARNING: To

reduce the risk of fire, electric shock, or injury:

■

Do not use outdoors or on wet surfaces.

■

Do not leave machine when it is plugged in.

■

Do not use with damaged cord or plug.

■

If appliance is not working as it should, has

been dropped, damaged, left outdoors, or dropped into water, return it to a service agent.

■

Do not pull or carry by cord, use cord as a

handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces.

■

Do not unplug by pulling on cord. Unplug

by grasping plug.

■

Do not handle plug or appliance with wet hands.

■

Do not expose hair, loose clothing, fingers

or body parts to openings or moving parts.

■

Do not pick up hot or burning objects such

as cigarettes, matches, or hot ashes.

■

Do not pick up flammable or combustible

materials (lighter fluid, petrol, kerosene, etc.) or use in the presence of explosive liquids or vapour.

■

Do not use appliance in an enclosed space filled

with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours.

■

Not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety

w w w . b i s s e l l . c o m

■

Young children should be supervised to ensure

that they do not play with the appliance.

■

Remove plug from electrical outlet before cleaning or maintaining the appliance.

■

If the supply cord is damaged, it must be

replaced by the manufacturer or its service agent in order to avoid a hazard.

■

Do not pick up toxic material (chlorine

bleach, ammonia, drain cleaner, petrol, etc.).

■

Do not allow to be used as a toy.

■

Do not use for any purpose other than

described in this User’s Guide.

■

Use only manufacturer’s recommended

attachments.

■

Do not use with any opening blocked; keep

free of dust, lint, hair, and anything that may reduce air flow.

■

Keep appliance on a level surface.

■

Turn off all controls before unplugging.

■

Be extra careful when cleaning stairs.

■

This appliance is provided with double

insulation. Use only identical replacement parts.

■

Do not use without the dirt container and

filters in place.

■

Pay close attention when working around

children.

■

Unplug before attaching TurboBrush™.

■

Do not pick up hard or sharp objects such as

glass, nails, screws, coins, etc.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

This model is for household use only.

IMPORTANT

FOR OPERATION ON A 220-240 VOLT A.C. 50/60 Hz POWER SUPPLY ONLY.

If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS

1362) fuse is fitted in the carrier contained in the plug. (Spares may be obtained from your BISSELL supplier). If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a mains socket.

Product view

Handle

TurboBrush

Inner Cyclone

Upper Tank

Easy Empty™ Dirt Container

Washable Pre-Motor Filter

Headlight

Foot Window

Hose Clip

Stretch Hose

™

Carry Handle

Dusting Brush/ Upholstery Tool

Crevice Tool

Twist ‘n Snap™ Hose

Power Switch

Extension Wand

HEPA Media Post Motor Filter

Lock ‘n Seal™ Lever

Handle Release Pedal

Quick Release™ Cord Wrap

Power Cord

Hose Wand

Quick

™

Release Cord Wrap

w w w . b i s s e l l . c o m

Wide Cleaning Foot

Height Adjustment Knob

CAUTION:

Do not plug in your vacuum until you are familiar with all instructions and operating procedures.

Hose Wand Base

Assembly

The only tool you’ll need to assemble your vacuum cleaner is a Phillips screwdriver.

Attach handle to vacuum

1. Locate the handle and cord wrap. Remove

the screw packet taped to the handle.

2. Stand the vacuum upright and from the

rear of the unit, slide the base of the handle firmly into the grooves at the top of the vacuum body.

3. Ensure that the handle fits firmly to the vacuum

body. If there are any gaps, continue to push firmly until the handle is secure.

4. Insert the provided screw into the existing

hole, attaching the handle to the body of the vacuum. Tighten securely with a screwdriver.

Attach vacuum hose and tools

1. Attach the Twist ‘n Snap™ Hose by lining up

the tabs on the base with the corresponding notches on the back of the vacuum as shown.

2. Turn the Twist ‘n Snap Hose to the right

to lock the hose into place.

3. Grasping the Quick Reach Handle, slide the

end of the Hose Wand onto the Hose Wand Base. Snap the Hose into the Hose Clip.

NOTE: The vacuum will not operate effectively unless the hose wand is firmly attached.

4. Slide the extension wand and crevice tool

into the storage clip on back of vacuum.

5. Slide the dusting brush/upholstery tool

into the storage clip on back of vacuum.

6. Store the TurboBrush on the front of the

handle by lining up the TurboBrush base with the base of the holder then push back to snap into place.

Twist 'n Snap Hose

CAUTION:

Before using your vacuum, make sure that the dirt container is in the locked position and that all filters (pre-motor and HEPA media postmotor) are in place. Do not operate your vacuum without these filters.

NOTICE:

For above floor cleaning, the floor brush will continue to rotate, but is raised above floor. To prevent carpet damage, do not lean on the vacuum or let the powerfoot tilt forward.

w w w . b i s s e l l . c o m

+ 11 hidden pages