Bissell 1565 Quick Start Guide
QUICK START GUIDE
Crevice
Tool
1565 SERIES
PROHEAT 2X® LIFT-OFF®
DEEP CLEANER
Innovative Two-in-One Carpet Cleaner
›› Clean a full room in the upright position
›› 2X DirtLifter® PowerBrushes loosen and remove deep down dirt
›› Detach the pod for cleaning stairs and upholstery or convenient spot cleaning
›› Use the BISSELL Professional formula to achieve professional results
Assembly Instructions
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
PARTS INCLUDED
1. Upper Handle
2. Portable Spot Cleaner/Base
3. 4 Screws (taped to handle)
4. Tool Attachment(s)
5. 2 Trial Size Formulas
Attachments
may face
forward for
best fit.
1. Slide handle into base. 2. On the back insert 4
161-0548 09/16 RevC
screws in a slight upward
angle. NOTE: Screw in
screws at an upward angle
Rotate
to Lock
3. Wrap cord. 4. Wrap hose and lock in
place by rotating latch.
5. Place attachment(s) –
Since attachments vary
by model, see carton to
see which attachments
are included
See other side for Fill Instructions
QUICK START GUIDE
Fill Instructions
FILL WITH WATER
Dirty Water
Tank
1. Locate the Clean Water
Tank on back side of the Pod
Clean Water
Tank
2. Pull handle up and lift
Clean Water Tank
3. Remove Cap, fill with hot
tap water (140F/60°C) to
Water Line.
reference the User Guide or visit
For further instructions
www.BISSELL.com
Deep Cleaning
Tips & Tricks
›› Vacuum first to remove all loose dirt,
debris, and pet hair before deep
cleaning your carpet.
›› Plan a cleaning route to leave an exit
path. It is best to begin cleaning in
the corner farthest from your exit.
›› Ensure your machine is stored
properly for the next time you use it!
For details on how to properly store
your machine, refer to User Guide.
Choose Your Formula
ANTIBACTERIAL FORMULA
BISSELL
+
With Trial Size Antibacterial
Formula: After adding hot
water, pour the antibacterial
formula into the clean tank
up to the EasyFill line. Twist
the cap back onto the tank.
For Future Use with Full-Size Antibacterial
Formula: After filling the clean tank with
hot water, twist the yellow cap back onto the
tank. Firmly insert the full size formula bottle
into the cap on the clean tank and squeeze
until formula reaches the EasyFill line.
2X FORMULA
BISSELL
+
After adding hot water to the
tank, add 1.5 oz of 2X formula.
DON’T FORGET!
Place the tank back on
the unit.
Loading...