Bissell 1422 User Manual

USER GUIDE

32.4V DC/120V AC
HYBRID UPRIGHT VACUUM CLEANER WITH LIFT-OFF® TECHNOLOGY
SERIES 1422

®

This model is for household use only.

SAVE THESE INSTRUCTIONS
FOR FUTURE USE

THIS
APPLIANCE
HAS A
POLARIZED
PLUG

To reduce the risk of electric shock, this appliance has a
polarized plug (one blade is wider than the other). This plug
will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a proper outlet.
Do not change the plug in any way.

WARRANTY

This warranty gives you specific legal rights and you may
also have other rights which may vary from state to state. If
you need additional instructions regarding this warranty or
have questions regarding what it may cover, please contact
BISSELL Consumer Care by email, telephone, or regular mail
as described below.


Limited 5-Year Warranty

Subject to the *EXCEPTIONS AND EXCLUSIONS identified
below, upon receipt of the product BISSELL will repair or
replace (with new or remanufactured components or
products), at BISSELL’s option, free of charge from the date
of purchase by the original purchaser, for five years a defec­tive or malfunctioning part.

See information below on how to return your BISSELL
product for service.

This warranty applies to product used for personal, and not
commercial or rental service. This warranty does not apply
to routine maintenance components such as filters, belts, or
brushes. Damage or malfunction caused by negligence,
abuse, neglect, unauthorized repair, or any other use not in
accordance with the User’s Guide is not covered.


If your BISSELL product should require service:

Contact BISSELL Consumer Care.
By phone (Toll-Free): (1)855-267-2662
Monday–Friday 8 a.m.–4:45 p.m. EST

BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUEN­TIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE
USE OF THIS PRODUCT. BISSELL’s LIABILITY WILL NOT
EXCEED THE PURCHASE PRICE OF THE PRODUCT.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation
or exclusion may not apply to you.

*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF
THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY
OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY
IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION
OF LAW, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE YEAR DURATION FROM
THE DATE OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.

1

PRODUCT VIEW

HYBRID UPRIGHT VACUUM CLEANER

REMOVABLE CAPSULE

STAIR TOOL

CAPSULE
DOCKING STATION

FOOT ASSEMBLY

2

PRODUCT VIEW

TELESCOPING HANDLE

TOUCH CONTROL PANEL

DIRT CUP RELEASE LATCH

DIRT CUP

DIRT CUP DOOR LATCH

BRUSH ROLL WINDOW

BUMPER

HANDLE RELEASE LATCH

POWER ON/OFF

BATTERY CHECK
INDICATOR

AC SOCKET
STORAGE/

STANDBY SWITCH

DUSTING BRUSH

TELESCOPIC WAND

CREVICE TOOL

TILT RELEASE

PEDAL

CAPSULE

RELEASE PEDAL

EXHAUST AIR VENT

STRETCH HOSE

HOSE HANDLE

WHEEL

3

OPERATIONS

FLOOR SETTINGS

PRESET: CARPET/CREVICE

In floor-cleaning mode, the CARPET preset
can be pressed = Max. suction power + Brush
roll ON. Use this setting on carpeted floors.

In removed and parked mode, the CREVICE
preset can be pressed = Max. suction power.
Use this setting when using the crevice tool at
the end of the hose.

PRESET: FLOOR/STAIRS

In floor-cleaning mode, the FLOOR preset can be
pressed = Max. suction power + Brush roll OFF.
Use this setting on hard floor surfaces.

In removed and parked mode, the STAIRS preset can
be pressed = Med. suction power. Use this setting
when using the stair tool on the end of the hose.

PRESET: RUGS/DRAPES

In floor-cleaning mode, the RUGS preset can
be pressed = Low suction power + Brush roll
OFF. Use this setting on loose rugs.

In removed and parked mode, the DRAPES
preset can be pressed = Min. suction. Use this
setting when using tools to clean drapes and
other delicate fabrics.

4

OPERATIONS

POWER INDICATORS

POWER INDICATOR

Blue LED indicates that AC plug is
plugged in and live. No illumination
indicates that AC is not connected.

SUCTION ADJUSTMENT

BRUSH ROLL ON/OFF

Press this button to turn brush roll
ON/OFF.

MAXIMUM SUCTION

Press this button to select max.
suction power.

MEDIUM SUCTION

Press this button to select med.
suction power.

LOW SUCTION

Press this button to select low
suction power.

POWER SOCKET

Allows connection to main AC
power supply.

STORAGE/STANDBY SWITCH

Storage mode is complete power o. For charging
the battery and putting into standby mode, slide
switch to standby position.

BATTERY INDICATOR

Displays the capacity level of the battery
when the unit is in standby and while the
product is in use. If a fault condition has
occurred, the fault can be identified by
counting the number of LEDs illuminated and
referencing the fault indication information.

BATTERY CHECK BUTTON

Push this button to show battery capacity.
If a fault has occurred. press this to identify
the fault condition.

POWER BUTTON

Pushing this button turns the vacuum cleaner
ON/OFF (unit must be in standby mode).

5

OPERATIONS

TO CHARGE THE UNIT

1. Slide switch to standby

2. Plug in power cord

connected to live 120V AC

3. Charging indicator illuminates

and charge cycle on battery
indicator will be shown

6

OPERATIONS

USE TELESCOPIC HANDLE

1. Pull back handle release

2. Pull up handle

Click to lock

4. Push down handle

3. Pull back handle release

to put handle down

7