Bird Technologies 7020 User Manual
7020 Series Power Sensor
Bird’s® new 7020 Power Sensor is an economical plug and play solution to your power measurement
needs. The 7020 determines and reports Forward and Reflected True Average Power and VSWR over a
wide frequency range of 350 MHz to 4.0 GHz. It also never requires field calibration, only requires
factory calibration once per year, and is traceable to National Institute of Standards and Technology
(NIST).
PROBLEMS } SOLUTIONS
Have analog, digital, and multi-carrier signals to measure
} Modulation independent measurements
Tight budget
} Inline device, no directional coupler required
} Complimentary Virtual Power Meter (VPM2) application
Downtime is unacceptable
} Monitor and perform maintenance for monitoring while
DUT is in-service
} Measure forward and reected power to troubleshoot
system failures
Varying eld tech skill levels
}Sensor plugs and plays with multiple display devices
Need condence in measurement
} No eld calibration required
} NIST traceable calibration
APPLICATIONS
WPS measures: Analog Cellular, Digital Cellular, 3G, 4G, Tetra,
APCO/P25, Trunking, CDMA, TDMA, WCDMA, GSM,
Transportation, Tactical Military, Radar, Avionics, Marine, LMR,
Analog Broadcast, Digital Broadcast, GSM, GPRS, EDGE, UMTS,
HSDPA, Bluetooth, Fire, GPS, NPSPAC, Paging, Project 25, Public
Safety, Telematics, Utilities, WIMAX and WLAN.
Measurements performed: Forward and Reected
Calculations Performed: VSWR and True Average Power
7020 Series Power Sensor
SPECIFICATIONS
Frequency Range 350 MHz - 4.0 GHz
Power Measurement Range 0.15 W to 150 W
Measurement Accuracy +/- (4% of reading + 0.05 W)
(above 35 °C or below 15 °C
add 3%)
Min, Forward Power for Reected
Measurement
Peak/Average Ratio, Max 12 dB
Insertion Loss, Max: 0.1 dB
Insertion VSWR 1.10 max
Impedance, Nominal 50 ohms
Response Time 3 sec
VSWR Range 1.15 to 99.9
RF Connector N Female
Directivity, Min 28 dB
Recommended Calibration Interval Annually
Power Supply
Source
Current Draw
Interface
Protocol
Connector
Data Logging
5.0 W
5Vdc from USB host
35 mA
USB 2.0
USB Type ‘B’ with “SeaLATCH”
locking USB connector
with VPM2 Software
STANDARDS COMPLIANCE
CE European Standard EN 61326-1:2006 –
Electronic Equipment for Measurement,
Control and Laboratory
Use – EMC Requirements in accordance
with EMC Directive (2004/108/EC
RoHS Compliant
Upgradability Firmware eld-upgradable via the USB
port
MECHANICAL AND ENVIRONMENTAL
Dimensions, Nominal 4.8“ x 2.2“ x 1.3”
(122mm x 54mm x 32mm)
Weight, nominal 0.8 lbs (0.36 kg)
Shock Mil-PRF-28800F Class 3
Vibration Mil-PRF-28800F Class 3
Operating Temperature -10 to +50 °C (+14 to +122 °F)
Storage Temperature -40 to +80 °C (-40 to +176 °F)
Humidity, Max 95% (non-condensing)
Altitude, Max 4,572 m (15,000ft)
STANDARD ACCESSORIES INCLUDED
5A2653-6L2 Sealatch USB Cable
VPM2 Virtual Power Meter
920-7020S Instruction Manual (Sensor)
920-VPM2 Instruction Manual (VPM2)
OPTIONAL ACCESSORIES NOT INCLUDED
PTA-MNMN Adapter
PTA-MNME Adapter
PTA-MNFE Adapter
COMPATIBLE DEVICES
SA-XT Series Site Analyzer
VPM2 Virual Power Meter
5000-XT Digital Power Meter
30303 Aurora Rd. Solon, OH 44139 866.695.4569 www.bird-technologies.com
Loading...