Bird Technologies 61-89A-50-05489-G1 User Manual
Bird
®
Signal Booster II Series
61-89A-50-05489-G1
BTG, TX RX System brand Signal Booster II Series
offers the best-in-class performance specifications
and quality with public safety rated reliability.
APPLICATIONS
For mission critical, public safety applications where additional
notch filtering is required to provide protection from adjacent cellular carriers.
PROBLEMS SOLUTIONS
Need protection from cellular
carriers
Signal booster provides extra
notch filtering against offending
cellular channels
Gain adjustment flexibility
required
Gain is programmable in
increments
Bird®Signal Booster II Series
61-89A-50-05489-G1
Bird®Technologies Group combines the industry leading brands of both Bird Electronic and TX RX Systems and is a global, innovative supplier of RF products, systems, services and educational solutions. Bird
®
Technologies Group reserved the right to modify specifications or discontinue any product without notice.
YOU’RE HEARD, LOUD AND CLEAR.
30303 Aurora Rd. :: Solon, OH 44139 :: 866.695.4569 :: www.bird-technologies.com
SPECIFICATIONS, ELECTRICAL
Frequency Range LF 806-824 MHz
HF 851-869 MHz
Passband Bandwidth 18 MHz
Minimum Gain 80 dB
Gain Adjustment Programmable 0-30 dB, 0.5 dB increments
3rd Order Output Intercept Point +55 dBm minimum. with no attenuation
Maximum Input Level 0 dBm
Maximum Output Level +30 dBm (single carrier)
RF Sampler PA Output sampler ports
Noise Figure (without attenuation 3.5 dB maximum
Propagation Delay <1 µs
Operating Temperature Range -30 °C to +50 °C
Nominal Impedance 50 ohm
VSWR <1.5:1
Preselector Rejection -35 dB at 4.75 MHz away from passband edges
Input/Output Connectors N female
RF Sampler Connectors BNC female
AC Power Input 100-240 VAC 50-60 Hz
DC Input Voltage +24 to +30 VDC, -48 VDC optional
Unit Power Consumption (AC/DC) <100 VA
Housing Painted Steel NEMA 4 (other options available)
Nominal Size 30” x 24” x 10”
Net Weight 120 lbs.
FCC Certification EZZ5PI031202
Industry Canada Certification 6150-Page Numeric pager signal for summed alarm
(consult factory for technical details) 6150-Battery 24 VDC output with 54 AH capacity
In a separate NEMA 4 enclosure 16”x24”x16”
Amplifier Modules: Hot swappable amps facilitates
easy field service and reconfiguration
Card Cage Modularity: Replacing interconnect
cables with backplane bus
Microprocess-controlled Monitoring and Alarming:
Continuous monitors multiple data points and
instantaneous alarms via LED LCD screen dry
contract closure and internal recording
Digital OLC: Enhanced Output Level Control
capability greater range for greater protection
LED bar graph for easy reading and unique
DataLog for long term system optimization
RF Test Port: Allowing measurement of output
power without interruption of operation
High Performance Filter: Tailored to customer requirements
and field-replaceable for BW reconfigurations
LCD Display Panel: Menu-driven facilitates simple
installation and controlling/monitoring without too
AC and DC Power: 11C-240AC and 24V DC are
standard on each unit
NEMA Enclosure: NEMA 4 or 4X nor-vented enclosure
for outdoor environments
Loading...