Bird Technologies 5019D Datasheet

Page 1
Wideband Power Sensor
5012D, 5016D, 5017D, 5018D, 5019D
Bird’s®Wideband Power Sensor (WPS) never requires field calibration, only requires factory calibration once per year and is traceable to National Institute of Standards and Technology (NIST). The WPS measures True Average Power, Peak Power, and Duty Cycle directly with exceptional accuracy and uses these precise measurements to calculate a wide range of other important factors, such as VSWR, Return Loss, Reflection Coefficient, Crest Factor, Average Burst Power, and CCDF.
PROBLEMS } SOLUTIONS
Downtime is neccessary
} Monitor and perform maintenance for monitoring while
DUT is in-service.
} Measure forward and reected power to troubleshoot
system failures.
Have analog, digital, and multi-carrier signals to measure
} Modulation independent measurements
Tight budgets
} USB connectivity, no meter required
Varying eld tech skill levels
} Sensor plugs and plays with 5000-XT meter
Need greater condence in measurement
} No eld calibration required } NIST traceable calibration
APPLICATIONS
WPS measures: Analog Cellular, Digital Cellular, 3G, 4G,
Tetra, DMR, MOTOTRBO, APCO/P25 Phase 1 & 2, Trunking, CDMA, TDMA, WCDMA, GSM, Transportation, Tactical Military, Radar, Avionics, Marine, LMR, Analog Broadcast, Digital Broadcast, GSM, GPRS, EDGE, UMTS, HSDPA, Bluetooth, Fire, GPS, NPSPAC, Paging, Public Safety, Telematics, Utilites, WIMAX and WLAN.
Measurements performed: Peak power, true average power
and Duty Cycle.
Calculations Performed: VSWR, Return Loss, Reflection
Co-ecient, Crest Factor, Average Burst Power and CCDF.
Page 2
Wideband Power Sensor
5012D, 5016D, 5017D, 5018D, 5019D
GENERAL SPECIFICATIONS
Connector
Power Supply
Impedance
Weight
Dimensions HxWxD
[inches (mm)] Data Logging
Operating Temps
[°C(°F)]
Storage Temps
[°C(°F)]
Mechanical Shock
& Vibration
INTERFACES
PC Interface (1)
PC Interface (2)
N Female (Both) USB Port: Less than one low-power USB load DC Input Connector: 7-18 VDC at less than 0.1A 50 Ohms (nominal)
1.2 lb. maximum
4.8” x 4.6” x 1.3” (122 mm x 117 mm x 33 mm) Requires 5000-XT or VPM3
-10° to 50°C (+14° to + 122°F)
-40° to + 80°C (-40° to +176°F)
IAQ MIL-PRF-28800F class3
EMC EN 61326-1-2006
CE
DPM
DB9 proprietary interface RS-232, 9600 Baud, no parity, 8 data bits, 1 stop bit, DB9 USB 2.0 Type B
Frequency Range
Power Range
Insertion VSWR
Insertion Loss
Directivity
AVERAGE POWER
Average Forward
Power Range
*Accuracy, Average
Forward Power
Minimum Forward
Power for Reected
Measurement
Return Loss
VSWR
5012D
350 MHz - 4.0 GHz
5016D
350 MHz - 4.0 GHz
5017D
25 MHz - 1.0 GHz
5018D
150 MHz - 4.0 GHz
5019D
25 MHz - 1.0 GHz
5012D
150 mW - 150 Watts Avg, 400 Watts Peak
5016D
25 mW - 25 Watts Avg, 60 Watts Peak
5017D
500mW - 500 Watts Avg, 1300 Watts Peak
5018D
100 mW - 25 Watts Avg, 60 Watts Peak
5019D
100 mW - 100 Watts, 260 Watts Peak
5012D
<1.05 from 0.35 to 2.5 GHz, <1.10 from 2.5 to 4 GHz
5016D
<1.05 from 0.35 to 2.5 GHz, <1.10 from 2.5 to 4 GHz
5017D
<1.05
5018D
<1.05 from 0.35 to 2.5 Ghz, <1.10 from 2.5 to 4 GHz
5019D
<1.05
5012D
<0.05 dB from 0.35 to 1.0 GHz, <0.1 dB from 1 to 4 GHz
5016D
<0.05 dB from 0.35 to 1.0 GHz, <0.1 dB from 1 to 4 GHz
5017D
<0.05 dB
5018D
<0.05 dB from 0.35 to 1.0 GHz, <0.1 dB from 1 to 4 GHz
5019D
<0.05 dB
5012D
30 dB up to 3.0 GHz, 28 dB from 3.0 to 4.0 GHz
5016D
30 dB up to 3.0 GHz, 28 dB from 3.0 to 4.0 GHz
5017D
28 dB up to 100 MHz, 30 dB from 100 to 1000 MHz
5018D
30 dB up to 3.0 GHz, 28 dB from 3.0 to 4.0 GHz
5019D
28 dB up to 100 MHz, 30 dB from 100 to 1000 MHz
5012D
150 mW - 150 Watts Avg, 400 Watts Peak
5016D
25 mW - 25 Watts Avg, 60 Watts Peak
5017D
500 mW - 500 Watts Avg, 1300 Watts Peak
5018D
100 mW - 25 Watts Avg, 60 Watts Peak
5019D
100 mW - 100 Watts, 260 Watts Peak
5012D
± 4% of reading, + 0.05 W
5016D
± 4% of reading, + 0.008 W
5017D
± 4% of reading, + 0.17 W
5018D
± 4% of reading, + 0.008 W
5019D
± 4% of reading, + 0.04 W
5012D
0.5 W
5016D
0.1 W
5017D
0.5 W
5018D
0.1 W
5019D
0.3 W
5012D
0.0 to 23 dB
5016D
0.0 to 23 dB
5017D
0.0 to 23 dB
5018D
0.0 to 23 dB
5019D
0.0 to 23 dB
5012D
1.15 to 99.9
5016D
1.15 to 99.9
5017D
1.15 to 99.9
5018D
1.15 to 99.9
5019D
1.15 to 99.9
Page 3
Wideband Power Sensor
5012D, 5016D, 5017D, 5018D, 5019D
BURST AVERAGE POWER
Burst Average
Power Range
Burst Width 5012D
Repetitions Rate 5012D
Duty Cycle (D) 5012D
*Accuracy, Burst
Average Power
5012D 5016D 5017D 5018D 5019D
5016D 5017D 5018D 5019D
5016D 5017D 5018D 5019D
5016D 5017D 5018D 5019D
5012D 5016D 5017D 5018D 5019D
4W - 150 Watts Avg .7W - 25 Watts Avg
13.5W - 500 Watts Avg .7 W - 25 Watts Avg
2.7 W - 100 Watts Avg
1 μs to 5 ms 1 μs to 5 ms 1 μs to 5 ms 1 μs to 5 ms 1 μs to 5 ms
5 Hz, Min 5 Hz, Min 5 Hz, Min 5 Hz, Min 5 Hz, Min
.002 to 1.0 .002 to 1.0 .002 to 1.0 .002 to 1.0 .002 to 1.0
± 6% of reading, + 0.05 W ± 6% of reading, + 0.008 W ± 6% of reading, + 0.17W ± 6% of reading, + 0.008 W ± 6% of reading, + 0.04 W
PEAK ENVELOPE POWER
Peak Envelope
Power Range
5012D 5016D 5017D 5018D 5019D
4.0 - 400 W
0.7 - 60 W
13.5 - 1300 W
0.7 - 60 W
2.7 - 260 W
*PEAK ENVELOPE POWER ACCURACY
burst width
> 200 μs
1 μs < burst
width < 200 μs
0.5 μs < burst width < 1 μs
burst width
< 0.5 μs
5012D 5016D 5017D 5018D 5019D
5012D 5016D 5017D 5018D 5019D
5012D 5016D 5017D 5018D 5019D
5012D 5016D 5017D 5018D 5019D
± 7% of reading, + 0.20 W ± 7% of reading, + 0.05 W ± 7% of reading, + 0.70 W ± 7% of reading, + 0.05 W ± 7% of reading, + 0.13 W
± 10% of reading, + 0.40 W ± 10% of reading, + 0.10 W ± 10% of reading, + 1.40 W ± 10% of reading, + 0.10 W ± 10% of reading, + 0.26 W
± 15% of reading, + 0.40 W ± 15% of reading, + 0.10 W ± 15% of reading, + 1.40 W ± 15% of reading, + 0.10 W ± 15% of reading, + 0.26 W
± 20% of reading, + 0.40 W ± 20% of reading, + 0.10 W ± 20% of reading, + 1.40 W ± 20% of reading, + 0.10 W ± 20% of reading, + 0.26 W
CREST FACTOR
Crest Factor
Measurement Range
*Accuracy, Crest Factor 5012D
5012D 5016D 5017D 5018D 5019D
5016D 5017D 5018D 5019D
150 mW - 150 Watts 25 mW - 25 Watts 500 mW - 25 Watts 25 mW - 25 Watts 100 mW - 100 Watts
Linear Sum of Peak and Average Power Accuracies
COMPLEMENTARY CUMULATIVE DISTRIBUTION FUNCTION (CCDF)
CCDF Measurement Range 5012D
5016D 5017D 5018D 5019D
Threshold
Measurement Range
Measurement
Uncertainty
*Level Set Accuracy 5012D
5012D 5016D 5017D 5018D 5019D
5012D 5016D 5017D 5018D 5019D
5016D 5017D 5018D 5019D
0.1 to 100%
0.1 to 100%
0.1 to 100%
0.1 to 100%
0.1 to 100%
4.0 - 400 W
0.7 - 25 W
13.5 - 500 W
0.7 - 25 W
2.7 -100 W
± 2% ± 2% ± 2% ± 2% ± 2%
As Peak Envelope Power Accuracy + 2.0%
Page 4
STANDARD ACCESSORIES
5A2653-10 USB Cable
VPM3 Virtual Power Meter
920-5012S Instruction Book
920-VPM3 Instruction Book
OPTIONAL ACCESSORIES
PTA-MNMN Precision Test Adapter Male N to Male N
PTA-MNME Male N to Male 7/16 (DIN)
PTA-MNFE Male N to Female 7/16 (DIN)
5A2226 Power Supply, Intl
5A2229 Power Supply, US
5A2264-09-MF-10 DB9 Cable, 10”
COMPATIBLE DEVICES
5012D 5016D 5017D 5018D 5019D
5000-EX
5000-XT
VPM2
VPM3
SA-1700 EXP
SA-2500 EX
SA-6000 EX
SA-3600 XT
SA-6000 XT
SH-36S
SH-361S
SH-362
SH-362S
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes No No
Yes Yes Yes No No
Yes Yes Yes No No
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
30303 Aurora Rd. Solon, OH 44139 866.695.4569 www.bird-technologies.com
Loading...