Biostar TZ68K+ Owner's Manual

TZ68K+ Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with t he instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Dichiar azione di confor mità
sintetica

Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002

Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive

2004/108/CE, 2006/95/CE e
1999/05/CE

quando ad esso applicabili

Short De cla rat ion of conf ormity

We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives

2004/108/CE, 2006/95/CE and
1999/05/CE

whenever these laws may be applied

Table of Contents

Chapter 1: Introduction ........................................ 1

1.1 Before You Start......................................................................................... 1

1.2 Package Checklist..................................................................................... 1

1.3 Motherboard Features.............................................................................. 2

1.4 Rear Panel Connectors.............................................................................. 3

1.5 Motherboard Layout................................................................................. 4

Chapter 2: Hardware Installation .......................... 5

2.1 Installing Central Processing Unit (CPU) ............................................... 5

2.2 FAN Headers.............................................................................................. 7

2.3 Installing System Memory ........................................................................ 8

2.4 Connectors and Slots................................................................................ 10

Chapter 3: Headers & Jumpers Setup .................. 13

3.1 How to Setup Jumpers............................................................................. 13

3.2 Detail Settings .......................................................................................... 13

Chapter 4: RAID Functions .................................. 18

4.1 Operating System.................................................................................... 18

4.2 Raid Arrays............................................................................................... 18

4.3 How RAID Works ..................................................................................... 18

4.4 Smart Storage Caching ........................................................................... 22

Chapter 5: T-Series BIOS & Software................... 23

5.1 T-Series UEFI BIOS ................................................................................... 23

5.2 T-Series Software...................................................................................... 26

Chapter 6: Useful Help ........................................ 38

6.1 Driver Installation Note.......................................................................... 38

6.2 Extra Information.................................................................................... 39

6.3 Troubleshooting....................................................................................... 40

Appendix: SPEC In Other Languages ................... 42

German.................................................................................................................. 42

French .................................................................................................................... 44

Italian..................................................................................................................... 46

Spanish ................................................................................................................... 48

Portugue se ............................................................................................................ 50

Polish...................................................................................................................... 52

Russian ................................................................................................................... 54

Arabic..................................................................................................................... 56

Japanese ................................................................................................................ 58

CHAPTER 1: INTRODUCTION

TZ68K+

1.1 B

EFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

 Prepare a dry and stable working environment with

sufficient lighting.

 Always disconnect the computer from power outlet

before operation.

 Before you take the motherboard out from anti-static

bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.

 Avoid touching the components on motherboard or the

rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.

 Do not leave any unfastened small parts inside the

case after installation. Loose parts will cause short
circuits which may damage the equipment.

 Keep the computer from dangerous area, such as heat

source, humid air and water.

 The operating temperatures of the computer should be

0 to 45 degrees Celsius.

1.2 PACKAGE CHECKLIST

Serial ATA Cable X 4
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1

Note: The package contents may be different due to area or your motherboard version.

1

Motherboard Manual

1.3 MOTHERBOARD FEATURES

Socket 1155

CPU

Chipset

Super I/O

Main

Memory

SATA 2 & 3

LAN

Sound

Codec

USB3.0

Slots

On Board

Connectors

Int e l Core i7 / i5 / i3 / Pent iu m / Ce le ron

processor

Intel Z68

IT8728

Prov ides the most common ly used legac y

Super I/O functionality.

Low Pin Count Interface

DDR3 DIMM Slots x 4

Max Memory Capacity 32GB

Each DIMM supports 512MB/

1GB/2GB/4GB/8GB DDR3

Integrated Serial ATA Controller

Realtek RTL 8111E

ALC892

ASM1042 Data transfer rates up to 600 MB/s

PCI slot x2 Supports PCI expansion card

PCI-E Gen2 x16 @ x16 s lot x1 Supports PCI-E Gen2 x16 expansion card

PCI-E Gen2 x16 @ x4 slot x1 Supports PCI-E Gen2 x4 expansion card

PCI-E Gen2 x1 slot x1 Supports PCI-E Gen2 x1 expansion card

SATA3 Connector x2 Each co nnector s upports 1 SATA3 device

SATA2 Connector x4 Each co nnector s upports 1 SATA2 device

Front Panel Connector x1 Supports front panel facilities

Front Audio Connector x1 Supports front panel audio function

CPU Fan Header x1 CPU Fan power supply (with Smart Fan function)

System Fan Header x2 System Fan Power supply

SPEC

Supports Execute Disable Bit / Enh anc ed Intel

SpeedSt ep® / Inte l Ar ch ite cture-64 / Ex tended

Memory 64 Technology / V irtualization Technology /

Hyp er T hr eading

En v iron ment Co n tro l in it iat ives ,

Hardware Monitor Controller

Fan Sp eed Contro ller

ITE's "S mart Guard ian" funct ion

Dual Channel Mode DDR3 memory modu le

Supports DDR3 1066/1333/1600(OC)

Supports DDR3 1866(OC)/2133(OC)/2200(OC)

Register ed DIMM and ECC D IMM is not supported

Data transfer rates up to 3.0 Gb/s / 6.0 Gb/s.

SATA Version 2.0 / 3.0 specification compliant

10 / 100 Mb/s / 1Gb/s auto negot iation

Half / Full duplex capability

5.1 channels audio out

High Definition Audio

2

Back Panel

I/O

Board Size

OS Support

TZ68K+

SPEC

Clear CMOS Head er x1 Restore CMOS dat a to facto ry default

USB2.0 Co nnector x3 Each conne ctor s upports 2 front panel USB2.0 ports

Consumer IR Connector x1 Supports infrared funct ion

Printer Port Connector x1 Each connector supports 1 Printer port

Serial Port Connector x1 Connects to RS-232 Port

S/PDIF out Connector x1 Supports digital audio out function

Power Connector (24pin) x1 Connects to Power supply

Power Connector (8pin) x1 Connects to Power supply

PS/2 Keyboard / Mouse x1

HDMI Port x1

VGA Port x1

DVI-D Port x1

LAN port x1

USB2.0 Port x2

USB3.0 Port x2

Audio Jack x3

230 (W) x 305 (L) mm

Windows XP / Vista / 7

Connects to PS/2 Keyboard / Mouse

Connects to HDMI cable

Connect to D-SUB monitor

Connect to DVI monitor

Connect to RJ-45 et hernet cable

Connect to USB2.0 devices

Connect to USB3.0 devices (by ASM1042) and

USB2.0/USB1.X devices (by Z68)

Provide Audio-In/Out and Mic. connect ion

Biostar reserves the r ight to add or remove support

for any OS with or without notice

1.4 REAR PANEL CONNECTORS

PS/2

Keyboard / Mouse

USB2.0X2

HDMI VGADVI-D

NOTE: Any of 2 HDMI / DVI-D / VGA can provide video signals o ut-put function.

NOTE: USB3.0 ports are backward compatible with USB2.0/USB1.X devices. USB3.0 is

controlled by ASM1042, but, USB2.0/USB1.X is controlled by Z68.

LAN

USB3.0X2

Line In/
Surround

Line Out

Mic In 1/
Bass/ Center

3

Motherboard Manual

1.5 MOTHERBOARD LAYOUT

USB_KBMS1

HDMI1

DVI1

VGA1

RJ45U SB1

AUDIO1

CODEC

ATXPW R2

SYS_FA N2

PEX1_1

PEX16_1

LAN

PEX16_2

Socket 1155

CPU1

CPU_FAN1

DDR3_A1

Z68

DDR3_A2

DB2DR3_

DDR3_B1

ATXP WR1

BIOS

SATA2 SATA 1

4

F_AUDIO 1

Super

I/O

JSPDIFOUT1

Note: represents the 1■

J_PRINT1

PCI1

PCI2

J_COM1

BAT1

SYS_FA N1

CIR1

st

pin.

F_USB3 F_USB2 F_USB1

PAN EL1

SATA4 SATA3SAT A6 SAT A5

LED_D2
LED_D1

SW_PWR1

JCMOS1

SW_RST1

CHAPTER 2: HARDWARE INSTALLATION

TZ68K+

2.1 I

NSTALLING CENTRAL PROCESSING UNIT (CPU)

Special Notice:

Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.

Step 1: Pull the socket locking lever out from the socket and then raise

the lever up.

Step 2: Remove the Pin Cap.

5

Motherboard Manual

Step 3: Look for the triangular cut edge on socket, and the golden dot on

CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.

Step 4: Hold the CPU down firmly, and then lower the lever to locked

position to complete the installation.

Step 5: Put the CPU Fan and heatsink assembly on the CPU and buckle it

on the retention frame. Connect the CPU FAN power cable into
the CPU_FAN1 to complete the installation.

6

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

CPU_FAN1: CPU Fan Header

Pin

41

SYS_FAN1/SYS_FAN2: System Fan Headers

SYS_FAN2

13

SYS_FAN1

Note:

The SYS_FAN1/SYS_FAN2 support 3-pin head connectors; the CPU_FAN1 supports
4-pin head connector. When connecting with wires onto connectors, please note that the
red wire is the positive a nd should be connected to pin#2, and the black wire is Ground
and should be co nnected to GND.

Assignment

1 Ground
2 +12V
3

FAN RPM r ate
sense

4 Smart Fan

Control

Pin

Assignment

1 Ground
2 +12V
3 FAN RPM rate

sense

TZ68K+

7

Motherboard Manual

2.3 INSTALLING SYSTEM MEMORY

A. Memory Modules

DDR3_A1

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

DDR3_B1

DDR3_A2

DDR3_B2

2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

8

TZ68K+

B. Memory Capacity

DIMM Socket

Location

DDR3_A1 512MB/1GB/2GB/4GB/8GB

DDR3_A2 512MB/1GB/2GB/4GB/8GB

DDR3_B1 512MB/1GB/2GB/4GB/8GB

DDR3_B2 512MB/1GB/2GB/4GB/8GB

DDR3 Module

Total Mem ory

Size

Max is 32GB.

C. Dual Channel Memory Installation

Please refer to the following requirements to activate Dual Channel function:

Install memory module of the same density in pairs, shown in the table.

Dual Channel Status DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2

Enabled X O X O

Enabled O O O O

(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or
x16)

Note:

Memory mod ule must be installed in DDR3-A2 or DDR3-B2 to boot the
system.

9

Motherboard Manual

2.4 CONNECTORS AND SLOTS

SATA1/SATA2: Serial ATA3 Connectors

The motherboard has a PCI to SATA Controller with 2 channels SATA3 interface,
it satisfies the SATA 3.0 spec and with transfer rate of 6.0Gb/s.

SATA3~SATA6: Serial ATA2 Connectors

The motherboard has a PCI to SATA Controller with 4 channels SATA2 interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Pin

Assignment

1 Ground

SATA1SATA2

7

4

1

2 TX+
3 TX­4 Ground
5 RX­6 RX+
7 Ground

Pin

Assignment

1 Ground
2 TX+

SATA3SAT A5

SATA4SATA6

7

4

1

3 TX­4 Ground
5 RX­6 RX+
7 Ground

10

ATXP W R1: ATX Power Source Connector

This connector allows user to connect 24-pin power connector on the ATX
power supply.

TZ68K+

12

Pin Assignment Pin Assignment

13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V

24

1

13

ATXP W R2: ATX Power Source Connector

This connector provides +12V to CPU power circuit. If the CPU power plug is

4-pin, please plug it into Pin 1-2-5-6 of ATXPWR2.

85

14

Pin

Assignment

1 +12V
2 +12V
3 +12V
4 +12V
5 Ground
6 Ground
7 Ground
8 Ground

Note:

Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2
connectors have been well plugged-in.

11

Motherboard Manual

PEX16_1: PCI-Express Gen2 x16 Slot

- PCI-Express 2.0 compliant.

- Maximum theoretical realized bandwidth of 8GB/s simultaneously per

direction, for an aggregate of 16GB/s totally.

- PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.

- 2X bandwidth over the PCI-Express 1.1 architecture.

PEX16_2: PCI-Express Gen2 x4 Slot

- PCI-Express 2.0 compliant.

- Maximum theoretical realized bandwidth of 2GB/s simultaneously per

direction, for an aggregate of 4GB/s totally.

PEX1_1: PCI-Express Gen2 x1 Slot

- PCI-Express 2.0 compliant.

- Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.

- PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.

PEX16_1

PEX1_1

PEX16_2

PCI1/PCI2: Peripheral Component Interconnect Slot

This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

12

CHAPTER 3: HEADERS & JUMPERS SETUP

TZ68K+

3.1 H

OW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETTINGS

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.

POW_LED

On/ Off

-

++

9
1

SPK

+

HLED

-

RST

16

8

Pin Assignment Function Pin Assignment Function

1 +5V 9 N/A
2 N/A 10 N/A
3 N/ A 11 N/ A N/A
4 Speaker
5 HDD LED (+) 13 Power LED (+)
6 HDD LED (-)
7 Ground 15 Power button
8 Reset control

Speaker
Connector

Hard drive
LED

Reset button

12 Power LED (+)

14 Power LED (-)

16 Ground

N/A

Power LED

Power-on button

13

Motherboard Manual

F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front
panel.

JSPDIFOUT1: Digital Audio-out Connector

This connector allows user to connect the PCI bracket SPDIF output header.

Pin Assignment

1 Mic Left in
2 Ground
3 Mic Right in
4 GPIO
5 Right line in
6 Jack Sense
7 Front Sense

2

10

1

9

8 Key
9 Left line in

10 Jack Sense

Pin

Assignment

1 +5V
2 SPDIF_OUT
3 Ground

CIR1: Consumer IR Connector

This header is for infrared remote control and communication.

14

125

31

Pin Assignment

1 IrDA serial input
2 Ground
3 Ground
4 Key
5 IrDA serial output
6 IR Power

6

TZ68K+

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.

13

13

Pin 1-2 Close:

Normal Operation (default).

Pin 2-3 Close:

Clear CMOS data.

13

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close” .

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 close” .

5. Power on the AC.

6. Load Optimal Defaults and save settings in CMOS.

F_USB1/F_USB2/F_USB3: Headers for USB 2.0 Ports at Front Panel

These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.

F_ USB1

USB3 F_

F_USB2

10

129

Assignment

Pin

1 +5V (fused)
2 +5V (fused)
3 USB­4 USB­5 USB+
6 USB+
7 Ground
8 Ground
9 Key

10 NC

15

Motherboard Manual

J_PRINT1: Printer Port Connector

This header allows you to connector printer on the PC.

Pin Assignment Pin Assignment

1 -Strobe 14 Ground

2 -ALF 15 Data 6

3 Data 0 16 Ground

4 -Error 17 Data 7

5 Data 1 18 Ground

6 -Init 19 -ACK

7 Data 2 20 Ground

8 -Scltin 21 Busy

9 Data 3 22 Ground

10 Ground 23 PE

11 Data 4 24 Ground

12 Ground 25 SCLT

13 Data 5 26 Key

J_COM1: Serial Port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

2

1

210

19

26

25

Pin

Assignment

1 Carrier detect
2 Received data
3 Transmitted data
4 Data terminal ready
5 Signal ground
6 Data set ready
7 Request to send
8 Clear to send
9 Ring indicator

10 NC

16

On-Board LED Indicators

There are 2 LED indicators on the motherboard showing system status.

LED_D2
LED_D1

LED_D1 & LED_D2: Debug Indicators
Please refer to the tables below for specific messages:

LED_D1 LED_D2 Message

ON ON Norma l

ON OFF Memory Error
OFF ON VGA Error
OFF OFF Abnormal: CPU / Chipset error.

On-Board Buttons

There are 2 on-board buttons.

TZ68K+

SW_RST1: Reset button.

SW_PWR1: Power Switch button.

SW_ PWR 1

SW_RST1

17

Motherboard Manual

CHAPTER 4: RAID FUNCTIONS

4.1 O

Supports Windows Vista and Windows 7.

PERATING SYSTEM

4.2 RAID ARRAYS

RAID supports the following types of RAID arrays:

RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for

many applications.

RAID 1: RAID 1 defines techniques for mirroring data.

RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.

RAID 5: RAID 5 provides fault to lerance and better utilization of disk capacity.

4.3 HOW RAID WORKS

RAID 0:

The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large f ile into smaller blocks and performs disk reads and writ es a cro ss m ultip le
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.

Features and Benefits

 Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the

platform.

 Uses: Intended for non-critical data requiring high data throughput, or any

environment that does not require fault tolerance.

 Benefits: provides increased data throughput, especially for large files. No

capacity loss penalty for parity.

 Drawbacks: Does not deliver any fault tolerance. If any drive in the array

fails, all data is lost.

 Fault Tolerance: No.

18

Block 1
Blo ck 3
Blo ck 5

Block 2
Blo ck 4
Blo ck 6

TZ68K+

RAID 1:

Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.

RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliab le
media.

Features and Benefits

 Drives: Minimum 2, and maximum is 2.
 Uses: RAID 1 is ideal for small databases or any other application that

requires fault tolerance and minimal capacity.

 Benefits: Provides 100% data redundancy. Should one drive fail, the

controller switches to the other drive.

 Drawbacks: Requires 2 drives for the storage space of one drive.

Performance is impaired during drive rebuilds.

 Fault Tolerance: Ye s .

Block 1
Block 2
Block 3

Block 1
Block 2
Block 3

19

Motherboard Manual

RAID 10:

RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10
solution for improved resiliency, performance and rebuild performance.

Features and Benefits

 Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
 Benefits: Optimizes for both fault tolerance and performance, allowing for

automatic redundancy. May be simultaneously used with other RAID levels
in an array, and allows for spare disks.

 Drawbacks: Requires twice the available disk space for data redundancy,

the same as RAID level 1.

 Fault Tolerance: Ye s .

20

Block 1
Block 3
Block 5

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

Block 2
Block 4
Block 6

TZ68K+

RAID 5:

RAID 5 stripes both data and parity information across three or more drives. It writes
data and parity blocks across all the drives in the array. Fault tolerance is maintained by
ensuring that the parity information for any given block of data is placed on a different
drive from those used to store the data itself.

Features and Benefits

 Drives: Mi nimu m 3.
 Uses: RAID 5 is recommended for transaction processing and general

purpose service.

 Benefits: An ideal combination of good performance, good fault tolerance,

and high capacity and storage efficiency.

 Drawbacks: Individual block data transfer rate same as a single disk. Write

performance can be CPU intensive.

 Fault Tolerance: Yes.

Disk 1

DATA 1

DATA 3
PA RI T Y

DATA 7
DATA 9
PA RI T Y

Disk 2

DATA 2

PA RI T Y

DATA 5

DATA 8
PA RI T Y
DATA 11

Disk 3

PA RI T Y

DATA 4

DATA 6

PA RI T Y
DATA 10
DATA 12

21

Motherboard Manual

4.4 SMART STORAGE CACHING

With Intel(R) Rapid Storage Technology, the performance of RAID with an Intel SSD
drive can be improved better.

Installing Smart Sotrage Caching

1. Install RAID drives (RAID 0, 1, 5) and an Intel SSD.

2. Activate RAID mode from BIOS, and install operating system.

3. Insert the Setup CD to the optical drive, and Install all drivers (including
Intel(R) Rapid Storage Technology Driver). After all processes finish,
reboot the system.

4. Intel(R) RST service ico n will show in notific ation area. Double click it to
open the main windows.

5. Select “Accelerate” page, and make sure the status of accelerated device
has been enabled accelerated.

22

CHAPTER 5: T-SERIES BIOS & SOFTWARE

p

TZ68K+

5.1 T-S

ERIES UEFI BIOS

T-Series UEFI BIOS Features

Overclocking Navigator Engine (O.N.E.)

Self Recovery System (S.R.S)

Smart Fan Function

BIO-Flasher: Update UEFI BIOS file from USB Flash Drive

!! WARNING !!

For better system performance, the UEFI BIOS firmware is being
continuously updated. The UEFI BIOS information described below
in this manual is for your reference only and the actual UEFI BIOS
information and settings on board may be different from this
manual. For further information of setting up the UEFI BIOS,

lease refer to the UEFI BIOS Manual in the Setup CD.

A. Overclocking Navigator Engine (O.N.E.)

O.N.E provides 4 systems allowing users to customize personal overclock
settings: Manual CPU System, Manual Memory System, Manual PWM
System, and Manual Voltage System.

Notice:

Not all types of Intel CPU perform above overclock setting ideally; the difference will be based on the
selected CPU model.

23

Motherboard Manual

NOTE

Overclock is an optional process, but not a “must-do” process; it is not
recommended for inexperienced users. Therefore, we will not be responsible
for any hardware damage which may be caused by overclocking. We also
woul d no t guarantee any overclocking performance.

B. Self Recovery System (S.R.S.)

This function can’t be seen under UEFI BIOS setup, and is always on whenever
the system starts up.

However, it can prevent system hang-up due to inappropriate overclock
actions.

When the system hangs up, S.R.S. will automatically log in the default UEFI
BIOS setting, and all overclock settings will be re-configured.

C. Smart Fan Function

Smart Fan Function is under “Smart Fan Control” in “Advanced Menu”.
This is a brilliant feature to control CPU/System Temperature vs. Fan speed.
When enabling Smart Fan function, Fan speed is controlled automatically by

CPU/System temperature.
This function will protect CPU/System from overheat problem and maintain the

system temperature at a safe level.

24

↓

TZ68K+

CPU Smart FAN

This item allows you to control the CPU Smart Fan function.

CPU FAN Calibrate

Press [ENTER] to calibrate CPU FAN.

Control Mode

This item provides several operation modes of the fan.

Fan Ctrl OFF(℃)

When CPU temperature is lower than this value, the CPU fan will keep
lowest RPM. The range is from 0~127, with an interval of 1.

Fan Ctrl On(℃)

When CPU temperature is higher than this value, the CPU fan controller
will turn on. The range is from 0~127, with an interval of 1.

Fan Ctrl Start Value

This item sets CPU FAN Start Speed Value. The range is from 0~127, with
an interval of 1.

Fan Ctrl Sensitive

The bigger the numeral is, the higher the FAN speed is. The range is from
0~127, with an interval of 1.

25

Motherboard Manual

5.2 T-SERIES SOFTWARE

Installing T-Series Software

1. Insert the Setup CD to the optical drive. The driver installation program
would appear if the Auto-run function has been enabled.

2. Select Software Installation, and then click on the respective software
title.

3. Follow the on-screen instructions to complete the installation.

Launching T-Series Software

After the installatio n process is completed, you will see the software icon
showing on the desktop. Double-click the icon to launch it.

TOverclocker

TOverclocker presents a simple Windows-based system performance
enhancement and manageability utility. It features several powerful and easy
to use tools such as Overclocking for enhancing system performance, also for
special enhancement on CPU and Memory. Smart-Fan management and PC
health are for monitoring system status. This utility also allows you to make
overclocking profiles saving unlimitedly, and pre-set OC modes are for easy
OC. (The screenshots below are for reference only)

26

TZ68K+

The CPU tab provides information on the CPU and motherboard.

The Memory tab provides information on the memory module(s).

You can select memory module on a specific slot to see its information.

The OC Tweaker tab allows you to change system clock settings and voltages
settings. It also provides six pre-set modes for you:

27

Motherboard Manual

3 Pre-set Modes: V6, V12, AUTO for different overclocking experience.

The HW Monitor tab allows you to monitor hardware voltage, fan speed, and
temperature. Besides, you also can set related values for CPU Smart Fan.

28

TZ68K+

Pressing TOVERCLOCKER logo
displays information about
manufacturer and software version.
You ca n upd ate cur r e nt ver sion by
clicking the button “Live Update.”

Green Power II Utility

BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances
energy efficiency by disabling extra phases while CPU is on light loading; it
features 4+1 power phases, current power saving, and toal power saving. This
tool integrates a friendly GUI to monitor your CPU Usage, CPU Watt, and CPU
Temperature. Moreover, it optimizes power saving and best power efficiency
on your system. (The illustration below is for reference only)

Display manufacturer &

Typical Mode

software version information

Performance
Mode

Medium Mode

Maxi-Energy Mode

Auto Phase Mode

Re set T im e &
Cons um ption

Display CPU
information

29

Motherboard Manual

G.P.U Mode Setting

This utility provides five modes, upon your requirements, to improve
system performance or to save power consumption.

Note: Even if the modes saving more power consumption are chosen, the
system still can keep excellent performance.

 Auto Phase Mode

System switches the mode automatically according to current system
loading condition.

 Performance Mode

This is the mode saving power consumption most. Least energy will
be used in the system.

 Typical Mode

Compared with that in Performance Mode, energy consumption in this
mode is a little bit more.

 Medium Mode

This is the standard system power saving mode.

 Maxi-Energy Mode

This is the best system performance mode.

30

TZ68K+

Guide of Lucid VIRTU Installation

With Lucid VIRTU solution, the resource and performance of graphics can be
integrated so that user can choose the suitable mode for the requirement.

System Requirements

 Graphics cards:

z Nvidia: GF 4xx/5xx series

z AMD: HD5xxx/HD6xxx series

 Display drivers:

z Intel: All WHQL drivers

z Nvidia: All WHQL drivers

z AMD: All WHQL drivers

 Operating System: Windows 7 32-bit and 64-bit

BIOS Setting

1. Enter BIOS setup menu ([Chipset]->[North Bridge]), and set the two
items as follows:
(1) Initiate Graphic Adapter: PEG/IGD
(2) IGD Multi-Monitor: Enabled

2. Press F4 to save the setting and exit.

31

Motherboard Manual

Software Installation

1. Install VGA Driver and VIRTU Software.

2. After installation, please restart the computer. The screenshot below is
control panel.

32

TZ68K+

e

eHot-Line (Optional)

eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.

Before you use this uti lity, please set Outlook Express as yo ur default e-mail clie nt applica tion program.

rep resents impo rtant

*

information t hat you
must provi de. Withou t
this informat ion, you may
not be able to send ou t
the mail.

This block will show
the infor mation which
would be collect ed in
the mail.

Send the mail ou t.

Describe co ndition

*

of your syst em.

Save these information to a .txt fil

Exit this dialog.

Select your area or

*

the area clos e to yo u.

Provid e the e-mail
addres s that you would
like to send the copy to.

Provide t he name of

*

the memory module
manufactu rer.

Provid e the name of
the power suppl y
manufac tur er and t he
model no .

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.

33

Motherboard Manual

Enter the file name and then click
“Save”. Your system information

will be saved to a .txt file.

We will not share custo mer ’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.

34

If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.

BIOS Update

n

BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.

Sh ow cur rent B IOS informat io

Update BIOS

from the Internet

with a BIOS fil e

Update BIOS

Save current BIOS

to a .bin file

TZ68K+

<Backup BIOS>

Once click on this button, the saving

dialog will show. Choose the

position to save file and enter file

name. (We recommend that the file

name should be English/number

and no longer than 7 characters.)

Then click Save.

35

Motherboard Manual

<Update BIOS>

Before doing this, please download the proper BIOS file from the website.

Click Update BIOS button, a dialog will
show for asking you backup current
BIOS. Click Yes for BIOS backup and
refer to the Backup BIOS procedure; or
click No to skip this procedure.

After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.

After the BIOS Update process, click on
OK to restart the system.

While the system boots up and the full screen logo shows, press <Delete>
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the T-Series software are subject to be
changed without notice. For better performance, the software is being continuously
updated. The information and pictures described above are for your reference only.
The actual i nformation and settings on board may be s lightly different from this
manual.

36

TZ68K+

BIOScreen Utility (Optional)

This utility allows you to personalize your boot logo easily. You can choose
JPG or BMP as your boot logo so as to customize your computer.

Please follow the following instructions to update boo logo:

1. Load Image：Choose the picture as the boot logo.

2. Transform：Transform the picture for BIOS and preview the result.

3. Update Bios：Write the picture to BIOS Memory to complete the update.

37

Motherboard Manual

CHAPTER 6: USEFUL HELP

6.1 D

RIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.

You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.

Note:

If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader so ftware from
http://www.adobe.com/products/acrobat/readstep2.html

38

6.2 EXTRA INFORMATION

CPU Overheated

If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdow n
automatically to avoid a damage of the CPU, and the system may not
power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection
function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

TZ68K+

39

Motherboard Manual

6.3 TROUBLESHOOTING

Probable Solution

1. There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work

2. Indicator light on keyboard does
not shine.

System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.

System does not boot from a hard disk
drive, but can be booted from optical
drive.

System only boots from an optical
drive. Hard disks can be read,
applications can be used, but system
fails to boot from a hard disk.

Screen message shows “Invalid
Configuration” or “CMOS Failure.”

System cannot boot after user installs a
second hard drive.

1. Make sure power cable is
securely plugged in.

2. Replace cable.

3. Contact technical support.

Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.

1. Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.

2. Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.

1. Back up data and applications
files.

2. Reformat the hard drive.
Re-install applications and data
using backup disks.

Review system’s equipment. Make sure
correct information is in setup.

1. Set master/slave jumpers
correctly.

2. Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

40

TZ68K+

This page is intentionally left blank.

41

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES

G

ERMAN

Sp ezif ika tio nen

Socket 1155

CPU

Chipsatz

Super E/A

Arbeitsspeich

er

SATA 2 & 3 Integrierter Serial ATA-Controller

LAN Realtek RTL 8111E

HD

Audio-Unters

tützung

USB3.0

Int e l Core i7 / i5 / i3 / Pent iu m / Ce le ron

Prozessoren

Intel Z68

IT8728

Biet et die h äufig ver wend eten a lten S up er

E/A-Funktionen.

Low Pin Count-Schnittstelle

DDR3 DIMM-Steckplätze x 4

Max. 32GB Arbeitsspeicher

Jeder DIMM unterstützt 512MB/

1GB/2GB/4GB/8GB DDR3.

ALC892

ASM1042 Datenübertragungsraten bis zu 600 MB / s

Unterstützt Execute Disable Bit / Enhanced Intel

SpeedSt ep® / Inte l Ar ch ite cture-64 / Ex tended

Memory 64 Technology / V irtualization Technology /

Hyp er T hr eading

Umgebungskontrolle,

Hardware-Überwachung

Lüfterdrehzahl-Controller/-Überwachung

"Smart Guardian"-Funktion von ITE

Dual-Kanal DDR3 Speichermodul

Unterstützt DDR3 1066/1333/1600(OC)

Unterstützt DDR3 1866(OC)/2133(OC)/2200(OC)

registrierte DIMMs. ECC DIMMs werden nicht

unterstützt.

Datentransferrate bis zu 3.0Gb/s / 6.0Gb/s.

Konform mit d er SATA-Spezifikation Version 2.0 / 3.0

10 / 100 / 1000 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

Unterstützt High-Definition Audio

5.1-Kanal-Audioausgabe

PCI-Steckplatz x 2

Steckplätz e

PCI-E Gen2 x 16 @ x16 Steckplatz x1

PCI-E Gen2 x 16 @ x4 Steckplatz x1

PCI-E Gen2 x1-Steckplatz x1

42

Onboard-Ans

chluss

TZ68K+

Sp ezif ika tio nen

SATA3-Anschluss x2 Jeder Anschluss unterstützt 1 SATA3-Laufwerk

SATA2-Anschluss x4 Jeder Anschluss unterstützt 1 SATA2-Laufwerk

Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen

Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion

CPU-Lüfterstromversorgungsanschluss (mit Smart

CPU-Lüfter-Sockel x1

Fan -F un ktio n)

System-Lüfter-Sockel x2 System-Lüfter-Stromversorgungsanschluss

"CMOS löschen "-Sockel x1

USB2.0-Anschluss x3 Jeder Anschluss unterstützt 2

Front taf el- USB 2.0-An sch lüsse

Verbraucher-IR Anschluss x1

Druckeranschluss Anschluss x1 Jeder Anschluss unterstützt 1 Druckeranschluss

Serieller Anschluss x1

S/PDIF Ausgangsanschluss x1 Unterstützt die digitale Audioausgabefunktion

Stromanschluss (24-polig) x1

St romansch luss (8-po lig ) x1

Rückseiten-E

/A

Platinengröße

OS-Unterstüt

zung

PS/2-Tastatur / Maus x 1

HDMI-Anschluss x1

VGA-Anschluss x1

DVI-D-Anschluss x1

LAN-Anschluss x1

USB2.0-Anschluss x2

USB3.0-Anschluss x2

Audioanschluss x3

230 mm (B) X 305 mm (L)

Windows XP / Vista / 7

USB3.0 Geräte (durch ASM1042)

USB2.0/USB1.X Geräte (durch Z68)

Biostar behält sich das Recht vor, ohne Ankündigung

die Unterstützung für ein Betriebssystem

hinzuzufügen oder zu entfernen.

43

Motherboard Manual

FRENCH

SPEC

UC

Chipset

Super E/S

Mémoire

principale

SATA 2 & 3

Socket 1155

Pro c esseurs Int e l Core i7 / i5 / i3 / Pen t iu m /

Celeron

Intel Z68

IT8728

Fournit la fonctionnalité de Super E/S

patrimoniales la plus utilisée.

Int e rfa ce à f a ib le co mpt e d e b roches

Fentes DDR3 DIMM x 4

Capacité mé mo ire max i male de 16 Go

Chaque DIMM prend en charge des DDR3 de

512Mo/1Go/2Go/4Go

Contrô leur Serial ATA int é gr é :

Prend en cha rge les techno log ies d'exécution d e b it

de désactivation / Intel SpeedStep® optimisée/

d'architectur e Inte l 64 / de mé moire ét endue 64 / de

virtualisation / Hyper Threading

Initiatives de contrôle environnementales,

Mon iteur d e mat ériel

Contrôleur /moniteur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

Modu le d e mé mo ir e D DR3 à mo d e à dou b le vo ie

Prend en charge la DDR3 1066/1333/1600(OC)

Prend en charge la DDR3

1866(OC)/2133(OC)/2200(OC)

Les DIMM à registres et DIMM avec code correcteurs

d'erreurs ne sont pas prises en charge

Taux de transfert jusqu'à 3.0Go/s / 6.0Go/s.

Conforme à la spécification SATA Version 2.0 / 3.0

LAN

Prise en

charg e

aud io HD

USB3.0

Fentes

44

Realtek RTL 8111E

10 / 100 / 1000 Mb/s négociation automatique

Half / Full duplex capability

Prise en charg e de l' aud io haut e déf inition

ALC892

Sortie aud io à 5 .1 voies

ASM1042 Taux de transfert de données jusqu'à 600 Mo / s

Fente PCI x 2

Fente PCI-E Gen2 x 16 @ x16 x1

Fente PCI-E Gen2 x 16 @ x4 x1

Fente PCI-E Gen2 x1 x1

Connecteur

embarqu é

E/S du

panneau

arrière

Dimensions

de la carte

Support SE

TZ68K+

SPEC

Connecteur SATA3 x2

Connecteur SATA2 x4

Connecteur du panneau avant x1 Prend en charge les équipements du panneau avant

Connect eur Audio du panneau avant x 1 Prend en charge la fonct ion aud io du pann eau avant

Embase de ventilateur UC x1

Embase de ventilateur système x2 Alimentation électrique du ventilateur système

Embase d'effacement CMOS x1

Connecteur USB2.0 x3

Connecteur de IR du consommateur x1

Connecteur de Port d'imprimante x1

Port série x1

Connecteur de sortie S/PDIF x1

Connecteur d'aliment at ion x1

(24 broches)

Connecteur d'aliment at ion x 1

(8 broch es)

Clavier / Souris PS/2 x1

Port HD MI x 1

Port VGA x1

Port DVI-D x1

Port LAN x1

Port USB2.0 x2

Port USB3.0 x2

Fiche aud io x3

230 mm (l) X 305 mm (H)

Windows XP / Vista / 7

Chaque connecteur pr end en charg e 1 périphérique

SATA3

Chaque connecteur pr end en charg e 1 périphérique

SATA2

Alimentation électrique du ventilateur UC (avec

fonction de ventilateur intelligent)

Chaque connecteur prend en charge 2 ports USB2.0

de panneau avant

Chaque connector prend en charg e 1 Port

d'imprimante

Prend en charge la fonction de sortie audio

numérique

USB3.0 dispositifs (par ASM1042)

USB2.0/USB1.X dispositifs (par Z68)

Biostar se réserve le droit d'ajouter ou de supprimer

le support de SE avec ou sans pr éavis

45

Motherboard Manual

ITALIAN

SPECIFICA

CPU

Chipset

Super I/O

Memoria
principale

SATA 2 & 3

Socket 1155

Pro ces s o re Intel Cor e i7 / i5 / i3 /

Pentium / Celeron

Intel Z68

IT8728

Fo rnis ce le fun z ionalit à lega cy Super I/O

usate più comunemente.

Interfaccia LPC (Low Pin Count)

Alloggi DIMM DDR3 x 4

Capacità massima della memoria 32GB

Ciascun DIMM supporta DDR3

512MB/1GB/2GB/4GB/8GB

Co ntroller S erial ATA integrat o

Supporto di Ex ecute Disable Bit / Enhanced

Intel SpeedStep® / Architettura Intel 64 /

Tecnologia Extended Memory 64 / Tecnologia

Virtualization / Hyper Threading

Funzioni di controllo dell’ambiente:

Monitoraggio hardware

Co ntroller / Mo nitorag g io ve lo cit à ventolin a

Funzione "Smart Guardian" di ITE

Modulo di memoria DDR3 a canale doppio

Supporto di DDR3 1066/1333/1600(OC)

Supporto di DDR3

1866(OC)/2133(OC)/2200(OC)

DIMM r egistrati e DIMM ECC non sono

supportati

Velocità di trasferimento dei dati fino a 3.0Gb/s

/ 6.0Gb/s.

LAN

Supporto
audio HD

USB3.0

Allo g gi

46

Compatibile specifiche SATA Versione 2.0/3.0

Negoziazione automatica 10 / 100 / 1000 Mb/s

Realtek RTL 8111E

Capacità Half / Full Dup lex

Supporto audio High-Definition (HD)

ALC892

Uscita audio 5.1 canali

ASM1042 Velocità di trasferimento dati fino a 600 MB / s

Allo g gio PC I x 2

Allo g gio PCI-E Gen2 x 16 @ x16 x1

Allo g gio PCI-E G en 2 x16 @ x4 x 1

Alloggio PCI Express Gen2 x1 x1

Connettori
su scheda

I/O
pannello
posteriore

Dimension
i scheda

Sistemi
operat ivi
supportati

TZ68K+

SPECIFICA

Connettore SATA3 x2 Ciascun connettore supporta 1 unità SATA3

Connettore SATA2 x4 Ciascun connettore supporta 1 unità SATA2

Co nnett ore pann ello fro n tale x 1 S upport a i s ervizi de l p an nello fro ntale

Connettore audio frontale x1 Supporta la funzione audio pannello frontale

Co llett o re vent o lina C PU x 1

Co llett o re vent o lina s is t em a x2 A limentazione ven t olina d i s is tema

Co llett o re cancellaz io ne CMOS x 1

Connettore USB2.0 x3

Connettore IR del consumatore x1

Connettore Porta stampante x1

Porta seriale x1

Connettore output S/PDIF x1 Supporta la funzione d’output audio digitale

Connettore alimentaz ione x1

(24 pin)

Connettore alimentazione x 1

(8 pin)

Tastiera / Mouse PS/2 x1

Porta HDMI x1

Porta VGA x1

Porta DVI-D x 1

Porta LAN x1

Porta USB2.0 x2

Porta USB3.0 x2

Connettore audio x3

230 mm (larghezza) x 305 mm

(altez za)

Windows XP / Vista / 7

Alimentazione ventolina CPU (con funzione

Smart Fan)

Ciascun connettore supporta 2 porte USB2.0

pannello frontale

Ciascun connettore supporta 1 Porta

stampante

USB3.0 dispositivi (da ASM1042)

USB2.0/US B1.X dis positivi (da Z68)

Biostar si riserva il diritto di aggiungere o

rimuovere il supporto di qualsiasi sistema

operativo senza preavviso.

47

Motherboard Manual

SPANISH

Especificación

CPU

Conjunto de

chips

Súper E/S

Memoria

principal

SATA 2 & 3

Socket 1155

Pro c esador In tel Cor e i7 / i5 / i3 / Pent iu m /

Celeron

Intel Z68

IT8728

Le ofrece las funcionalidades heredadas de

us o más común S úper E /S.

Interfaz de cuenta Low Pin

Ranuras DIMM DDR3 x 4

Capacidad máxima de memoria de 32GB

Cada DIMM admite DDR de

512MB/1GB/2GB/4GB/8GB

Controlador ATA Serie Integrado

Admite Bit de d eshabilitación de ejecución / Intel

SpeedSt ep® Mejorado / Int el Architecture- 64 /

Tecnolog ía Extended Memor y 64 / Tecno log ía de

virtualizac ión / Hyper Thr ead ing

In iciat ivas d e co n tro l d e ent o rno ,

Monitor hardware

Controlador/monitor de velocidad de ventilador

Función "Guardia inteligente" de ITE

Módulo de memoria DDR3 de canal Doble

Admite DDR3 de 1066/1333/1600(OC)

Admite DDR3 de 1866(OC)/2133(OC)/2200(OC)

No admite DIMM registrados o DIMM compatibles

con ECC

Tasas de transferencia de hasta 3.0 Gb/s / 6.0 Gb/s.

Co mp at ible co n la vers ió n SATA 2.0 / 3 .0.

Red Local

Soporte de

sonido HD

USB3.0

Ranuras

48

Realtek RTL 8111E

Negociación de 10 / 100 / 1000 Mb/s

Funciones Half / Full dúplex

Soporte de sonido de Alta Definición

ALC892

Salida de sonido de 5.1 canales

ASM1042 Tasas de transferencia de datos hasta 600 MB / s

Ranura PCI X2

Ranura PCI-E Gen2 x16 @ x16 X1

Ranura PCI-E Gen2 x16 @ x4 X1

Ranura PCI-E Gen2 x 1 X1

Conectores

en p laca

Panel

trasero de

E/S

Ta maño d e

la placa

Soporte de

sistema

operativo

TZ68K+

Especificación

Conector SATA3 X2 Cada conector soporta 1 dispositivos SATA3

Conector SATA2 X4 Cada conector soporta 1 dispositivos SATA2

Co necto r de p ane l f ron t al X1 S o port a in s t alaciones en e l pan e l fr ont a l

Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal

Cabecera de ventilador de CPU X1 Fuente de alimentación de ventilador de CPU (con

función Smart Fan)

Cabecera de ventilador de sistema X2 Fuente de alimentación de ventilador de sistema

Cabecera de borrado de CMOS X1

Conector USB2.0 X3 Cada conector soporta 2 puertos USB2.0 frontales

Conector de IR del consumidor X1

Conector Puerto de impresora X1 Cada conector soporta 1 Puerto de impresora

Puert o ser ie X1

Conector de salida S/PDIF X1 Soporta función de salida de sonido digital

Conector de alimentación X1

(24 patillas)

Conector de alimentación X1

(8 patillas)

Teclado / R atón PS /2 X1

Ratón HDMI X1

Puert o VGA X1

Puerto DV I-D X1

Puerto de red local X1

Puert o USB2.0 X2

Puert o USB3.0 X2

Conector de sonido X3

230 mm. (A) X 305 Mm. (H)

Windows XP / Vista / 7

USB3.0 dispositivos (por ASM1042)

USB2.0/USB1.X dispositivos (por Z68)

Biostar se reserva el derecho de añadir o retirar el

soporte de cualquier SO con o sin aviso previo.

49

Motherboard Manual

PORTUGUESE

ESPECIFICAÇÕES

Socket 1155

CPU

Chipset Intel Z68

Especificaçã

o Super I/O

Memória

principal

SATA 2 & 3 Controlador Serial ATA integrado

LAN Realtek RTL 8111E

Suporte

para áudio

de alta

definição

USB3.0

Ranhuras

Pro c essador Int e l Core i7 / i5 / i3 / Pent iu m /

Celeron

IT8728

Proporciona as funcionalidades mais

utilizadas em termos da especificação Super

I/O.

Interface LPC (Low Pin Count).

Ranhuras DIMM DDR3 x 4

Capacidad e máx ima d e memória: 16 GB

Cada módulo DIMM suporta uma memória

DDR3 de 512MB/ 1GB/2GB /4GB/8GB

ALC892

ASM1042 Taxas de transferência de dados até 600 MB / s

Ranhura PCI x2

Ranhura PCI-E Gen2 x16 @ x16 x1

Ranhura PCI-E Gen2 x16 @ x4 x1

Ranhura PCI-E Gen2 x 1 x1

Suporta as tecno logias Ex ecut e Disab le B it /

Enhanced Int el SpeedStep® / Inte l Arqu itect ure - 64

/ Extended Memor y 64 / Virtualization / Hyper

Thread ing

In iciat ivas p ar a con t ro lo do amb ient e

Monitorização do hardware

Controlador/Monitor da velocidade da ventoinha

Função "S mart Gu ardian" d a ITE

Módulo de memória DDR3 de canal duplo

Suporta módulos DDR3 1066/1333/1600(OC)

Suporta módulos DDR3

1866(OC)/2133(OC)/2200(OC)

Os módulos DIMM registados e os DIMM ECC não

são suportados

Velocidades de transmissão de dados até 3.0 Gb/s /

6.0 Gb/s.

Compat ib ilidad e co m a especif ica ção SATA versão

2.0 / 3.0.

Auto negociação de 10 / 100 / 1000 Mb/s

Capacidade semi/full-duplex

Suporta a especificação High-Definition Audio

Saída de áudio de 5.1 canais

50

Conectores

na placa

Entradas/S

aídas no

painel

traseiro

Tamanho

da placa

Sistemas

operativos

suportados

TZ68K+

ESPECIFICAÇÕES

Conector SATA3 x2 Cada conector suporta 1 dispositivo SATA3

Conector SATA2 x4 Cada conector suporta 1 dispositivo SATA2

Conector do painel frontal x1 Para suporte de várias funções no painel frontal

Conector de áud io frontal x1 Suporta a fun ção de áud io no paine l fronta l

Conector da ventoinha da CPU x1

Conector da ventoinha do sistema x2 Alimentação da ventoinha do s istema

Conector para limpeza do CMOS x1

Conector USB2.0 x3

Conector de IR do consumidor x1

Conector da para impressora x1 Cada conector suporta 1 Porta para impressora

Porta série x1

Conector de saída S /PDIF x 1 Supo rt a a saída de áudio d ig ita l

Conector de alimentação x1

(24 pinos)

Conector de alimentação x1

(8 p inos)

Teclado / R ato PS/2 x1

Porta HD MI x1

Porta VGA x1

Porta DVI-D x1

Porta LAN x1

Porta USB2.0 x2

Porta USB3.0 x2

Tomada de áudio x3

230 mm (L) X 305 mm (A)

Windows XP / Vista / 7

Alimentação da ventoinha da CPU (com a função

Smart Fan)

Cada conector suporta 2 portas USB2.0 no painel

frontal

USB3.0 dispositivos (por ASM1042)

USB2.0/USB1.X dispositivos (por Z68)

A Biostar reserva-se o direito de adicionar ou

remover suporte para qualquer sistema operativo

com ou sem av is o prévio.

51

Motherboard Manual

POLISH

SPEC

Procesor

Chipset

Pamięć

główna

Super I/O

SATA 2 & 3

Socket 1155

Pro c esor Int e l Core i7 / i5 / i3 / Pent iu m /

Celeron

Intel Z68

Gniazda DDR3 DIMM x 4

Maks. wielkość pamięci 32GB

Każde gniazdo DIMM obs ługuje moduły

512MB/1GB/2GB/4GB/8GB DDR3

IT8728

Zapewnia najbardziej powszechne funkcje

Super I/O.

Interfejs Low Pin Count

Zintegrowany kontroler Serial ATA

Obsługa Execute D is able B it / Enhanced Intel

SpeedSt ep® / Inte l Ar ch ite cture-64 / Ex tended

Memory 64 Technology / V irtualization Technology /

Hyp er T hr eading

Mod uł pamięci DDR3 z trybem podwójnego kanału

Obsługa DDR3 1066/1333/1600(OC)

Obsługa DDR3 1866(OC)/2133(OC)/2200(OC)

Brak obsług i Register ed DIMM oraz ECC DIMM

Funkcje kontroli warunków pracy,

Mon itor H /W

Kontroler/Monitor prędkości wentylatora

Funkcja ITE "S mart Gu ard ian"

Transfer danych do 3.0 Gb/s / 6.0 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0 / 3.0.

10 / 100 / 1000 Mb/s z automatyczną negocjacją

LAN

Obsługa

aud io HD

USB3.0

Gniazda

52

Realtek RTL 8111E

ALC892

ASM1042 Cena transferu danych do 600 MB / s

Gniazdo PCI x2

Gniazdo PCI-E Gen2 x16 @ x16 x1

Gniazdo PCI-E Gen2 x16 @ x4 x1

Gniazdo PCI-E Gen2 x 1 x1

szybkości

Działanie w tryb ie połowicznego / pełnego dupleksu

Obsługa H ig h-Definition A ud io

5.1 kanałowe wyjście audio

Złącza

wbud owane

Back Panel

I/O

Wymiary

płyty

Obsluga

systemu

operacyjne

go

TZ68K+

SPEC

Złącze SATA3 x2 Każde złącze obs ługuje 1 urządzenie SATA3

Złącze SATA2 x4 Każde złącze obs ługuje 1 urządzenie SATA2

Złącze panela przedniego x1 Obsługa elementów panela przedniego

Przedn ie złącze aud io x1 Obsługa funkcji audio na panelu przednim

Złącze główkow e went ylatora

procesora x1

Złącze główkow e went ylatora

systemowego x2

Złącze główkowe kasowan ia CMOS x1

Złącze USB2.0 x3

Złącze Konsument IR x1

Złącze Port drukarki x1 Każde złącze obs ługuje 1 Port drukarki

Port szeregowy x1

Złącze wyjścia S/PDIF x1 Obsługa funkcji cyfrowego wyjścia aud io

Złącze zasilania (24 pinowe) x1

Złącze zas ilania (8 p ino we) x1

Klaw iatura / Mysz PS /2 x1

Port HD MI x 1

Port VGA x1

Port DVI-D x1

Port LAN x1

Port USB2.0 x2

Port USB3.0 x2

Gniazdo audio x3

230 mm (S) X 305 mm (W)

Windows XP / Vista / 7

Zasilanie wentylatora procesora (z funkcją Smart

Fan )

Zasilanie wentylatora systemowego

Każde złącze obs ługuje 2 porty USB2.0 na panelu

przednim

USB3.0 urz ądzeń (przez ASM1042)

USB2.0/USB1.X urządzeń (przez Z68)

Biostar zastrzega sobie prawo dodawania lub

odwoływ ania obsłu g i dowo ln ego s ys t emu

operacyjnego bez powiado mienia.

53

Motherboard Manual

RUSSIAN

CPU

(центральн

ый

процессор)

Набо р

микросхем

Основная

память

Super I/O

SATA 2 & 3

Локальная

сеть

Звуко вая

поддержка

жесткого

диска

USB3.0

Слоты

Socket 1155

Процессор Inte l Cor e i7 / i5 / i3 / Pent iu m /

Celeron

Intel Z68

Слоты DDR3 DIMM x 4

Максимальная ёмкость памяти 16 ГБ

Каждый модуль DIMM поддерживает

512МБ /1ГБ/2ГБ/4ГБ DDR3

IT8728

Обеспечивает наиболее используемые

действующие фун кцио нальные

возможно сти Super I/O.

Интерфейс с низким коли чест вом выво до в

Встроенное последовательное устро йство

управления ATA

Realtek RTL 8111E

ALC892

ASM1042 скорости передачи данных до 600 МБ / с

Слот PCI x2

Слот PCI-E Gen2 x16 @ x16 x1

Слот PCI-E Gen2 x16 @ x4 x1

Слот PCI-E Gen2 x 1 x1

СПЕЦ

Поддержка технологий Execut e D isab le Bit /

Enhanced Inte l SpeedStep® / Intel Arch it ecture-64

/ Extended Memory 64 Technology / технологии

виртуализац ия / Hyper Threading

Мод уль памяти с двух канальн ым режимом DDR3

Поддержка DDR3 1066/1333/1600(OC)

Поддержка DDR3 1866(OC)/2133(OC)/2200(OC)

Не поддерживает зарегистрированные модули

DIMM and ECC DIMM

Инициативы по охране окружающей среды,

Аппаратный монитор

Регул ятор скорости вентилято ра/ монитор

Функция ITE "Smart Guard ian"

(Интеллектуальная защита)

скорость передачи данных до 3.0 гигабит/с /

6.0 гигабит/с.

Соответствие спецификации SATA версия 2.0/3.0

Автоматическое согласование 10 / 100 / 1000

Мб/с

Частичная / полная дуплексная способность

Звуко вая поддержка High- D ef inition

5.1канальный звуковой выход

54

Встроенны

й разъём

Задняя

панель

средств

ввода-выв

ода

Размер

панели

Поддержка

OS

TZ68K+

СПЕЦ

Разъ ём SATA3 x2 Каждый разъём поддерживает 1 устройство SATA3
Разъ ём SATA2 x4 Каждый разъём поддерживает 1 устройство SATA2
Разъ ём на лицевой панели x1 Поддержка устройс тв на лицевой панели

Входной звуковой разъём x1

Контактирующее приспособление
вентил ятора центрального процессора x1

Контактирующее приспособление
вентил ятора системы x2
Открытое контактирующее
приспособление CMOS x1

USB2.0-разъём x3

Разъ ём едок а ИКЫЙ x1

Разъ ём Порт подключения

принтера x1
Последоват ельный порт x1

Разъ ём вывода для S/PDIF x1 Поддержка вывода цифровой звуковой функц ии
Разъ ем питания (24 вы вод) x1
Разъ ем питания (8 вывод) x1

Клавиатура / Мышь PS/2 x1
Порт HD MI x 1
Порт VGA x1
Порт DVI-D x1
Порт LAN x1

USB2.0-порт x2
USB3.0-порт x2

Гнездо для подключения
наушников x3

230 мм (Ш) X 305 мм (В)

Windows XP / Vista / 7

Поддержка звуко вых функций на лицевой
панели
Источник питания для вентилятор а центрального
процессора (с функц ией интеллектуального
вентил ятора)

Источник пит ания для вентилятора системы

Каждый разъём поддерживает 2 USB2.0-порта на
лицевой панели

Каждый разъём поддерживает 1 Порт

подключения принтера

USB3.0 устройств (по ASM1042)
USB2.0/USB1.X ус тройств (по Z68)

Biostar сохраняет за собой право добавлять или

удалять средства обеспечения для OS с или без
предварительного уведомле ния.

55

Motherboard Manual

ARABIC

تﺎﻔﺻاﻮﻤﻟا

تﺎﻴﻨﻘﺗ ﻢﻋﺪﺗExecute D isab le B it / Enhanced Intel

SpeedSt ep® / Inte l Ar ch ite cture-64 / Ex tended

Memory 64 Technology / Virtualization Technology /

Hyp er T hr eading

Intel Z68

ﺔﺤﺘﻓDDR3 DIMM دﺪﻋ4

ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ16 ﺖیﺎﺑ ﺎﺠﻴﺝ

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻣ ةﺮآاذ ﻢﻋﺪﺗ DDR3 ﺔﻌﺳ

ﺔﻔﻴﻇو"S mart Guard ian" ﻦﻣ ITE

ﻞﻘﻧ تﺎﻧﺎﻴﺒﻟا تﺎﻋﺮﺴﺏ ﻞﺼﺗ ﻰﻟإ 3.0 ﺖﺏﺎﺠﻴﺟ/ ﺔﻴﻧﺎﺛ / 6.0

/512 و ﺖیﺎﺑ ﺎﺠﻴﻣ 1/

ﻞﺋﺎﺳو ﻢﻜﺤﺘﻟا ﻲﻓ ﺔﺌﻴﺒﻟا:

ﺐﻗاﺮﻣ ﺔﻓﺮﻌﻤﻟ ﺔﻟﺎﺣ ةﺰﻬﺝﻷا

ﺐﻗاﺮﻣ ﻲﻓ ﺔﻋﺮ ﺳ ﺔﺣوﺮﻤﻟا

ﺖﺏﺎﺠﻴﺟ/ ﺔﻴﻧﺎﺛ.

تﺎﺠﻟﺎﻌﻣIntel Core i7 / i5 / i3 / Pent iu m /

ﻢﻋﺪﺗ عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا DDR3 تﺎﻌﺳ 1066/1333/1600)OC(

عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗDDR3 تﺎﻌﺳ

و2/و 4 ﺎﺠﻴﺝﺖیﺎﺑ

ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻣ ﻖﻓاﻮﺘﺗ ﻻ ﻲﺘﻟا ﻚﻠﺗو ECC

ﺮﻓﻮﺗ ﺔﻔ ﻴﻇو Super I/O ﺮﺜآﻷا ًﺎ ﻣ ا ﺪ ﺨﺘ ﺳ ا.

ﺗﻢﻋﺪ ﺔﻴﻨﻘ ﺗ Low Pi n Count Interface

Socket 1155

Celeron ﺑ ددﺮﺘ ی ﻰﻟإ ﻞﺼ

ةﺮآاذ ةﺪﺣوDDR3 ﻘﻟا ﺔﺝودﺰﻣةﺎﻨ

ﺖیﺎﺑ ﺎﺠﻴﻣ

1866)OC/(2133)OC/(2200)OC (ﺖیﺎﺑ ﺎﺠﻴﻣ

IT8728

ﻢﻜﺤﺘﻣ Serial ATA ﻞﻣﺎﻜﺘﻣ

ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا

ﺔیﺰآﺮﻤﻟا

ﺔﻋﻮﻤﺠﻣ ﺢﺋاﺮﺸﻟا

ةﺮآاﺬﻟا ﺔﻴﺴﻴﺋﺮﻟا

Super I/O

SATA 2 & 3

ﺔﻘﺑﺎﻄﻣ تﺎﻔﺹاﻮﻤﻟ SATA راﺪﺹﻹا 2.0 / 3.0.

تﻻﺪﻌﻣ ﻞﻘﻧ تﺎﻧﺎﻴﺏ ﻞﺼﺗ لإى 600 ﺎﻐﻴﻣ ﺖیﺎﺏ / ﺔﻴﻧﺎﺛ

56

ضوﺎﻔﺗ ﻲﺋﺎﻘﻠﺗ 10/100 ﺎﺠﻴﻣ ﺖیﺎﺑ /ﺔﻴﻥﺎﺙ و1ﺎﺠﻴﺝ ﺖﺑ/ﺔﻴﻥﺎﺙ

ﺔﻴﻥﺎﻜﻣإ ﻞﻘﻨﻟا جودﺰﻤﻟا ﻞﻣﺎﻜ ﻟا/ﻲﻔﺼﻨﻟا

ﻢﻋﺪﺗ ﺔﻴﻨﻘﺗ تﻮﺼﻟا ﻲﻟﺎﻋ ﻒیﺮﻌﺘﻟا ﻦﻣ

5.1 تاﻮﻨﻗ جﺮﺨﻟ تﻮﺼﻟا

ﺔﺤﺘﻓPCI دﺪﻋ2

ﺔﺤﺘﻓPCI-E Gen2 x16 @ x16 دﺪﻋ1

ﺔﺤﺘﻓPCI-E Gen2 x16 @ x4 دﺪﻋ1

ﺔﺤﺘﻓPC I-E Ge n2 x 1 دﺪﻋ1

Realtek RTL 8111E

ALC892

ASM1042

ﺔﻜﺒﺵ ﺔﻴﻠﺥاد

ﻢﻋد تﻮﺼﻟا ﻲﻟﺎﻋ

ﻒیﺮﻌﺘﻟا

USB3.0

تﺎﺤﺘﻔﻟا

تﺎﻔﺻاﻮﻤﻟا

ةﺰﻬﺝأ ﻦﻣ ﺪﺣاو ﺬﻔﻨﻣ ﻞآ ﻢﻋﺪیSATA3 ﺬﻔﻨﻣSATA3 دﺪﻋ2

ﺝأ ﻦﻣ ﺪﺣ او ﺬﻔﻨﻣ ﻞآ ﻢﻋﺪی ةﺰﻬSATA2 ﺬﻔﻨﻣSATA2 دﺪﻋ4

ﺔﻴﻣﺎﻣﻷ ا ﺔﺣﻮﻠﻟا تاﺰﻴﻬﺠﺗ ﻢﻋﺪی ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮ ﻠﻟا ﺬﻔﻨﻣ دﺪﻋ1

ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮ ﻠﻟﺎ ﺑ تﻮﺼﻟا ﺔﻔﻴﻇو ﻢﻋﺪی ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔﻨﻣ دﺪﻋ1

ﺔﻔﻴﻇو ﻊﻣ ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻤﻟ ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺘﻟSmart Fan ﺔیﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻣ ﺔﻠﺹو دﺪﻋ1

ﻗﺎﻄﻟا ﻞﻴﺹﻮﺘﻟمﺎﻈﻨﻟا ﺔﺣوﺮﻤﻟ ﺔ مﺎﻈﻨﻟا ﺔﺣوﺮﻣ ﺔﻠﺹو دﺪﻋ2

TZ68K+

ﺢﺴﻣ ﺔﻠﺹوCMOS دﺪﻋ1

ﻲﺘﺤﺘﻓ ﺬﻔﻨﻣ ﻞآ ﻢﻋﺪیUSB2.0ﺔﻴﻣﺎﻣﻷ ا ﺔﺣﻮﻠﻟﺎﺑ ﺬﻔﻨﻣUSB2.0 دﺪﻋ3

ﺬﻓﺎﻨﻤﻟا ﻰﻠﻋ ﺢﻄﺳ

ﺔﺣﻮﻠﻟا

ﺬﻔﻨﻣ ﺔﻜﻠﻬﺘﺴﻣ ﺖﺤﺗ ﺮﻤﺣﻷا دﺪﻋ1

ﺔﻌﺑﺎﻃ ﺬﻔﻨﻣ دﺪﻋ1

ﻲﻠﺴﻠﺴﺗ ﺬﻔ ﻨﻣ دﺪﻋ1

ﻲﻤﻗﺮﻟا تﻮﺼﻟا جﺮﺥ ﺔﻔﻴﻇو ﻢﻋﺪی جﺮﺥ ﺬﻔﻨﻣS/PDIF دﺪﻋ1

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)24سﻮ ﺑد( دﺪﻋ1

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)8ﺲﻴﺑﺎﺑد( دﺪﻋ1

(ASM1042 ﻦﻣ ﻞﺒﻗ ) ةﺰﻬﺝﻷا USB3.0

(Z68 ﻦﻣ ﻞﺒﻗ ) ةﺰﻬﺝﻷا USB2.0/USB1.X

ﺢﻴﺗﺎﻔﻣ ﺔﺣﻮﻟ / سوﺎﻣPS/2 دﺪﻋ1

ﺬﻓﺎﻨﻣHD MI دﺪﻋ1

ﺬﻓﺎﻨﻣVGA دﺪﻋ1

ﺬﻓﺎﻨﻣDV I-D دﺪﻋ1

ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬﻔﻨﻣ ﻋ دﺪ1

ﺬﻓﺎﻨﻣ ﻞﺥد/جﺮﺥ

ﺔﺣﻮﻠﻟا ﺔﻴﻔﻠﺨﻟا

ﺬﻓﺎﻨﻣ2.0US B دﺪﻋ2

ﺬﻓﺎﻨﻣ3.0US B دﺪﻋ2

تﻮﺹ ﺲﺒﻘﻣ دﺪﻋ3

ﻆﻔﺘﺤﺗ Biostar ﺎﻬﻘﺤﺑ ﻲﻓ ﺔﻓﺎﺿإ وأ ﺔﻟازإ ﻢﻋﺪﻟا يﻷ مﺎﻈﻥ ﻞﻴﻐﺸﺗ رﺎﻄﺥﺈﺑ وأ

نوﺪﺑ رﺎﻄﺥإ.

230 ﻢﻣ)ضﺮﻋ (X 305 ﻢﻣ)عﺎﻔﺗرا(

Windows XP / Vista / 7 ﻢﻋد ﺔﻤ ﻈﻥأ ﻞﻴﻐﺸﺘﻟا

ﻢﺠﺣ ﺔﺣﻮﻠﻟا

57

Motherboard Manual

JAPANESE

仕様

CPU

チップセット

メインメモリ

Super I/O

SATA 2 & 3

LAN

Socket 1155

Int e l Cor e i7 / i5 / i3 / Pent iu m / Celeron プロ

セッサ

Intel Z68

DDR3 DIMMスロット x 4

最大メモリ容 量32GB

各DIMMは 512MB/1GB/2GB/4GB/8GB DDR3

をサポート

IT8728

もっとも一般 に使 用されるレ ガシーSuper I/O機

能を採用して いま す。

低ピンカウン トイ ンターフェ イス

統合シリアルATA コントロー ラ

Realtek RTL 8111E

Execute Disab le Bit / Enh anced Intel SpeedStep® /

Intel Architecture-64 / Extended Memory 64

Technology / Virtualization Technology / Hyper

Thread ingをサポートします

デュアル チ ャン ネルモードDDR3メモリモジ ュール

DDR3 1066/1333/1600(OC) をサポ ート

DDR3 1866(OC)/2133(OC)/2200(OC) を サポート

登録済みDIMMとECC DIMMはサポ ートされま せん

環境コントロ ール イニシアチ ブ、

H/Wモニ ター

ファン速度コ ント ローラ/ モニター

ITE の「スマート ガー ディアン」 機能

最高3.0 Gb/秒 / 6.0 Gb /秒のデー タ転送 速度

SATAバージョン2 .0 / 3.0仕様に準拠 。

10 / 100 / 1000 Mb/秒のオート ネゴシ エーション

半/全二重機能

HDオ ーディ

オのサポート

USB3.0

スロット

58

ALC892

ハイデフィニ ショ ンオーディ オのサポー ト

5.1 チ ャンネルオ ーディ オアウト

ASM1042 データ転送速 度最大600 MB /秒の

PCIスロット x2

PCI-E Gen2 x16 @ x16スロット x1

PCI-E Gen2 x16 @ x4ス ロット x1

PCI Express Gen2 x 1ス ロット x1

オンボードコ

ネクタ

背面パネル

I/O

ボードサイズ

OSサポー ト

TZ68K+

仕様

SATA3コネクタ x2 各コネクタは 1つのSATA3デバイスをサ ポートしま す

SATA2コネクタ x4 各コネクタは 1つのSATA2デバイスをサ ポートしま す

フロントパネ ルコ ネクタ x1 フロントパネ ル機 能をサポー トします

フロントオー ディ オコネクタ x1 フロン トパネ ルオーディ オ機能をサ ポー トします

CPUファンヘッダ x1 CPUファン電源装置(スマートフ ァン 機能を搭載 )

システムファ ンヘ ッダ x2 システ ムファン電 源装置

CMOSクリアヘッダ x1

USB2.0コネ クタ x3

消費者IR コネクタ x1

プリンタポー トコ ネクタ x1 各コネクタは 1つのプリ ンタポート をサポ ートします

シリアルポー ト x1

S/PDIFアウトコネ クタ x1 デジタルオー ディ オアウト機 能をサ ポートしま す

電源コネクタ (24 ピン) x1

電源コネクタ (8ピン) x1

PS/2キーボード / マウス x1

HDMIポート x1

VGAポート x1

DVI-Dポート x1

LANポート x1

USB2.0ポー ト x2

USB3.0ポー ト x2

オーディオジ ャッ ク x3

230 mm (幅) X 305 mm (高さ)

Windows XP / Vista / 7

各コネクタは 2つのフロ ントパネル USB2.0ポー トをサポ

ートします

USB3.0デバ イス (で ASM1042)

USB2.0/USB1.Xデバイ ス (で Z68)

Biostarは事前の サポートな しにOSサ ポー トを追加ま たは

削除する権利 を留 保します。

2011/07/19

59