Biostar GF7050V-M7 SE Owner's Manual

192

1 Mi c L eft in 2 Gr oun d 3 Mi c R igh t i n 4 GP IO 5 Ri ght line in 6 Ja ck Sen se 7 Fr ont Sense 8 Ke y 9 Le ft lin e i n 10 J ack Sense

1 Gr oun d 2 +1 2V 3 FAN R PM r ate s en se

PS/2

Mous e

PS/2

Keyb oard

USBX 2USBX 2

10/1 00 Mbps L AN

COM1

VGA

Line I n/ Surr ound

Line O ut

Mic In 1 / Bass / Cente r

Atomic AuJa Bjorn3D BUG

Hartware

3Ditalia

CHIP CHIP CHIP

CLUB OVERCLOCKER

Custom PC Custom PC CRW

CRW DOSV Power Report Guru3D

HardwareZone Igromania Noticias 3D Noticias 3D

OverclockerCafe PC Achat HardwareZone PC Lab

PC Magazine

PC Porfessionale

PC Power Play PC WORLD PC WORLD PC WORLD

PC WORLD PC WORLD TweakTown

CHIP

CHIP HardOCPiXBT

PC Modding PC Modding

PC Stats

WWW.ANANDTECH.COM

CD-IN Connector

1 Left Channel Inp ut 2 Ground 3 Ground 4 Right Channel In put

8 16

Power LED

On/Off

Reset

HDD LED

Speaker

+ +

Pi n 1-2 C lo se:

Norma l Op era ti on (defa ult)

Pi n 2-3 C lo se:

Clear C MO S dat a

1 +5 V 2 SP DIF_O UT 3 Gr ound

1 Ground 2 +12V 3 FAN RPM rate

sense

4 Smart Fan Control

1 + 12 V 2 + 12 V 3 G ro un d 4 G ro un d

*CD-IN-Anschluss *Connecteur d’entrée CD *Connettore CD-in *Conector de entrada de CD *Conector para entrada de CDs *Złącze wejścia CD *Разъём ввода для CD *CDインコネクタ CD-IN ﺬﻔﻨﻡ*

5.1-Channel HD Audio

*Unterstützt High-De󰘰nition Audio / 5.1-Kanal-Audioausgabe *Prise en charge de l’audio haute dé󰘰nition / Sortie audio à 5.1

voies *Supporto audio High-De󰘰nition (HD) / Uscita audio 5.1 canali *Soporte de sonido de Alta De󰘰nición / Salida de sonido de 5.1

canales *Suporta a especi󰘰cação High-De󰘰nition Audio / Saída de áudio

de 5.1 canais *Obsługa High-De󰘰nition Audio / 5.1 kanałowe wyjście audio *Звуковая поддержка High-De󰘰nition / 5.1канальный звуковой

выход *ハイデフィニションオーディオのサポート / 5.1 チャンネルオ

ーディオアウト تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ 5.1 /ﻦﻡ ﻒﻳﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺕ ﻢﻋﺪﺕ*

Back Panel I/O Connectors

*Rückseiten-E/A *E/S du panneau arrière *I/O pannello posteriore *Panel trasero de E/S ﺔﻴﻔﻠﺨﻟا ﺔﺣﻮﻠﻟا جﺮﺥ/ﻞﺥد ﺬﻓﺎﻨﻡ*

*Entradas/Saídas no painel traseiro *Back Panel I/O *Задняя панель средств ввода-

вывода

*背面パネルI/O

Power Connector (4pin)

*Stromanschluss(4-polig) *Connecteur d’alimentation(4 broches) *Connettore alimentazione(4 pin) *Conector de alimentación(4 patillas) *Conector de alimentação(4 pinos) *Złącze zasilania (4 pinowe) *Разъем питания (4 вывод) *電源コネクタ(4ピン) (سﻮﺑد4)ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ*

Front Audio Connector

*Front-Audioanschluss *Connecteur Audio du panneau avant *Connettore audio frontale *Conector de sonido frontal *Conector de áudio frontal *Przednie złącze audio *Входной звуковой разъём *フロントオーディオコネクタ ﻲﻡﺎﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ*

Printer Port Connector

*Druckeranschluss Anschluss *Connecteur de Port d’imprimante *Connettore Porta stampante *Conector Puerto de impresora *Разъём Порт подключения принтера

*Conector da para impressora *Złącze Port drukarki *プリンタポートコネクタ

ﺔﻌﺏﺎﻃ ﺬﻔﻨﻡ*

Floppy Disk Drive Connector

*Diskettenlaufwerkanschluss *Connecteur de disquette *Connettore 󰘱oppy *Conector disco 󰘱exible ﺔﻥﺮﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ*

*Conector da unidade de disquetes *Złącze napędu dyskietek *Разъём НГМД *フロッピーコネクタ

USB 2.0 Connectors

*USB 2.0-Anschluss *Connecteur USB 2.0 *Connettore USB 2.0

*Conector USB 2.0 *Conector USB 2.0 *Złącze USB 2.0

*USB 2.0-разъём *USB 2.0コネクタ USB 2.0ﺬﻔﻨﻡ*

LGA 775 for

Intel Core2Duo/Core2Quad/Pentium D/

Pentium 4/Celeron 4xx Processor

Supports 45nm CPU FSB: 1333 MHz

*LGA 775

Intel Core2Duo/Core2Quad/Pentium D/Pentium 4/Celeron 4xx Prozessoren

*LGA 775

Processeurs Intel Core2Duo/Core2Quad/Pentium D/Pentium 4/Celeron 4xx

*LGA 775

Processore Intel Core2Duo/Core2Quad/Pentium D/Pentium 4/Celeron 4xx

*LGA 775

Procesador Intel Core2Duo/Core2Quad/Pentium D/Pentium 4/Celeron 4xx

*LGA 775

Processador Intel Core2Duo/Core2Quad/Pentium D/Pentium 4/Celeron 4xx

*LGA 775

Procesor Intel Core2Duo/Core2Quad/Pentium D/Pentium 4/Celeron 4xx

*LGA 775

Процессор Intel Core2Duo/Core2Quad/Pentium D/Pentium 4/Celeron 4xx

تﺎﺠﻟﺎﻌﻡIntel Core2Duo/Core2Quad/Pentium D/Pentium 4/Celeron 4xx

LGA 775*

Chipset: GeForce 7050/nForce 610i

*Chipsatz: GeForce 7050/nForce 610i *Conjunto de chips: GeForce 7050/ nForce 610i

*Набор микросхем: GeForce 7050/nForce 610i *チップセット: GeForce 7050/nForce 610i GeForce 7050/nForce 610i ﺢﺋاﺮﺸﻟا ﺔﻋﻮﻤﺠﻡ*

CPU Fan Header

*CPU-Lüfter-Sockel *Embase de ventilateur UC *Collettore ventolina CPU *Cabecera de ventilador de CPU *Conector da ventoinha da CPU *Złącze główkowe wentylatora

procesora

*Контактирующее приспособление

вентилятора центрального процессора

*CPUファンヘッダ ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻡ ﺔﻠﺹو*

Front Panel Connector

*Fronttafelanschluss *Connecteur du panneau avant *Connettore pannello frontale *Conector de panel frontal *Conector do painel frontal *Złącze panela przedniego *Разъём на лицевой панели *フロントパネルコネクタ ﺔﻴﻡﺎﻡﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ*

System Fan Header

*System-Lüfter-Sockel *Embase de ventilateur système *Collettore ventolina sistema *Cabecera de ventilador de sistema *Conector da ventoinha do sistema *Złącze główkowe wentylatora

systemowego *Контактирующее приспособление

вентилятора системы *システムファンヘッダ

مﺎﻈﻨﻟا ﺔﺣوﺮﻡ ﺔﻠﺹو*

SATA Connectors

*SATA-Anschluss *Connecteur SATA *Connettore SATA

*Conector SATA *Conector SATA *Złącze SATA

PCI Slots

*PCI-Steckplatz *Fente PCI *Alloggio PCI

*Ranura PCI *Ranhura PCI *Gniazdo PCI

PCI-Express x16 Slot

*PCI Express x16-Steckplatz *Fente PCI Express x16 *Alloggio PCI Express x16 *Ranura PCI express x16 PCI Express x16ﺔﺤﺘﻓ*

*Ranhura PCI Express x16 *Gniazdo PCI Express x16 *Слот PCI Express x16 *PCI Express x16スロット

*Разъём SATA *SATAコネクタ SATA ﺬﻔﻨﻡ*

*Слот PCI *PCIスロット PCI ﺔﺤﺘﻓ*

S/PDIF-OUT Connector

*S/PDIF-Ausgangsanschluss *Connecteur de sortie S/PDIF *Connettore output SPDIF *Conector de salida S/PDIF *Conector de saída S/PDIF *Złącze wyjścia S/PDIF *Разъём вывода для S/PDIF *S/PDIFアウトコネクタ

S/PDIFجﺮﺥ ﺬﻔﻨﻡ*

Clear CMOS Header

*“CMOS löschen”-Sockel *Embase d’e󰘯acement CMOS *Collettore cancellazione CMOS *Cabecera de borrado de CMOS *Conector para limpeza do CMOS *Złącze główkowe kasowania CMOS *Открытое контактирующее

приспособление CMOS *CMOSクリアヘッダ CMOS ﺢﺴﻡ ﺔﻠﺹو*

Power Connector (24pin)

*Stromanschluss(24-polig) *Connecteur d’alimentation

(24 broches) *Connettore alimentazione(24 pin) *Conector de alimentación

(24 patillas)

*Conector de alimentação

(24 pinos) *Złącze zasilania (24 pinowe) *Разъем питания (24 вывод) *電源コネクタ(24ピン) (سﻮﺑد24)ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ*

IDE Connector

*IDE-Anschluss *Connecteur IDE *Connettore IDE

*Conector IDE *Conector IDE *Złącze IDE

*Разъём IDE *IDEコネクタ IDEﺬﻔﻨﻡ*

PCI-Express x1 Slot

*PCI Express x1-Steckplatz *Fente PCI Express x1 *Alloggio PCI Express x1 *Ranura PCI express x1

PCI Express x1ﺔﺤﺘﻓ*

*Ranhura PCI Express x1 *Gniazdo PCI Express x1 *Слот PCI Express x1 *PCI Express x1スロット

DDR2 DIMM Slots

Each DIMM supports 256MB/512MB

/1GB/2GB DDR2 533/667/800

*DDR2 DIMM-Steckplätze

Jeder DIMM unterstützt 256MB/512MB/1GB/2GB DDR2 533/667/800

*Fentes DDR2 DIMM

Chaque DIMM prend en charge des DDR2 533/667/800 de 256Mo/ 512Mo/1Go/2Go

*Alloggi DIMM DDR2

Ciascun DIMM supporta DDR2 533/667/800 256MB/512MB/1GB/2GB

*Ranuras DIMM DDR2

Cada DIMM admite DDR2 533/667/800 de 256MB/512MB/1GB/2GB

*Ranhuras DIMM DDR2

Cada módulo DIMM suporta uma memória DDR2 533/667/800 de 256MB/512MB/1GB/2GB

*Gniazda DDR2 DIMM

Każde gniazdo DIMM obsługuje moduły 256MB/512MB/1GB/2GB DDR2 533/667/800

*Слоты DDR2 DIMM

Каждый модуль DIMM поддерживает 256МБ/512МБ/1ГБ/2ГБ DDR2 533/667/800

*DDR2 DIMMスロット

各DIMMは 256MB/512MB/1GB/2GB DDR2 533/667/800をサポート

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺕ DIMM عﻮﻥ ﻦﻡ ةﺮآاذ ﻢﻋﺪﺕ DDR2 533/667/800 ﺔﻌﺳ

ﺖﻳﺎﺑ 256 ﺖﻳﺎﺑ ﺎﺠﻴﻡ /512 ﺎﺠﻴﺝ ﺖﻳﺎﺑ ﺎﺠﻴﺝ 1و/2و ﺖﻳﺎﺑ ﺎﺠﻴﻡ

DDR2 DIMM ﺔﺤﺘﻓ*

Step 1:CPU Installation

Pi n 1 -2 Close:

Normal Operation (default)

Pi n 2 -3 Close:

Clear CMO S d at a

LGA 775 CPU Socket

Supports Intel Core2Duo/Core2Quad/ Pentium D/Pentium 4/Celeron 4xx processor Supports 45nm CPU FSB: 1333 MHz

Step 4: Hold the CPU down 󰘰rmly, and then lower the

lever to locked the position.

Package Checklist

▲ Installation Guide x 1 ▲ HDD Cable x 1

▲ Fully Setup Driver CD x 1 ▲ Rear I/O Panel x 1

(full version manual les inside)

▲ Serial ATA Cable x 1 ▲ FDD Cable x 1 (optional)

▲ Serial ATA Power Cable x 1 (optional) ▲ Parallel Printer Cable x1 (optional)

Note: The package contents may differ by area or your motherboard version.

Serial NO. Denition

NF73VM7-xx 60xxxxxxx00001

Step 1: Remove the protection

cap from the CPU socket and keep the cap well.

CAUTION

Our RMA policy only accepts the mainboard comes with the cap on the CPU socket, so please keep the protection cap well after installation. We will not be responsible for any damage to the pin-leg of the CPU socket resulting from misplacement/loss/incorrect removal of the protection cap.

Step 2: Pull the socket locking lever out

from the socket and then raise the lever up to a 90-degree angle.

Step 3: Look for the triangular

cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will 󰘰t only in the correct orientation.

Step 5: Place the CPU fan assembly on top of

the installed CPU and make sure that the four fasteners match the motherboard holes. Orient the assembly and make the fan cable is closest to the CPU fan connector.

Step 6: Press down two fasteners at one time

in a diagonal sequence to secure the CPU fan assembly in place. CPU installation completes.

Note:

Do not forget to connect the CPU fan connector. For further information, please refer

to Step 3:Power Connection.

PCB Version NO.

Serial NO. of Production

Manufacturer’s Internal Part NO.

Q&A of Technical Support

Q: How to get a quick response for my request on technical support?

A: Please carry out a simple troubleshooting before sending “Technical Support Form” on our website.

Q: Is the motherboard dead? Do I need to return it to where I bought from or go through an RMA

process?

A: After you had gone through the troubleshooting procedures, yet the problem still exists, or you nd an

evident damage on the motherboard. Please contact your reseller shop to get the RMA service.

The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or 󰘰tness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. Product names appearing in this manual are for identi󰘰cation purpose only and trademarks and product names or brand names appearing in this document are the property of their respective owners. This document contains materials protected under International Copyright Laws. All rights reserved. No part of this manual may be reproduced, transmitted or transcribed without the expressed written permission of the manufacturer and authors of this manual. If you do not properly set the motherboard settings, causing the motherboard to malfunction or fail, we cannot guarantee any responsibility.

Step 2:Memory Installation

DDR2 DIMM Slot x2

Supports DDR2 533/667/800 Each DIMM supports 256MB / 512MB / 1GB / 2GB DDR2 Max Memory Capicity is 4GB

Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the break on the Slot.

Step 2: Insert the DIMM vertically and 󰘰rmly into the slot until the retaining chip

snap back in place and the DIMM is properly seated.

Step 3:Power Connection

CPU Fan Power (JCFAN1)

JCFAN1 supports 4-pin head connector. When connecting with wires onto connectors, please note that the black wire is Ground and should be connected to pin#1(Ground).

24-pin ATX Power (JATXPWR1)

JATXPWR1 is the main power supply connector located along the edge of the board next to the DIMM slots. Firmly plug the power supply cable into the con-

nector and make sure it is secure.

4-pin ATX Power (JATXPWR2)

JATXPWR2, the 4-pin ATX 12V power connection, is used to provide power to the CPU. Align the pins to the connector and press rmly until seated.

Installation Complete

Follow the three steps to nish CPU, memory, and power instal-

lation, and the whole motherboard assembly should looks like this picture.

50-RNX73VXM7X-Q-B1

Clear CMOS Header

The Occasion to Clear CMOS

1. Forgot the supervisor/user password preset in the BIOS menu.

2. Unable to boot up the system because the CPU clock was incorrectly set in the BIOS menu.

3. The CMOS data becomes corrupted.

Clear CMOS Header

(CMOS1)

Clear CMOS Procedure

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait for ve seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Reset your desired password or clear the CMOS data.

NOTE: How to Setup Jumpers

The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”.

Pin Opened Pin Closed Pin 1-2 Closed

Driver & Manual

After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance.

You will see following window after you insert the CD.

Click on Driver to start the process of driver installation.

The installation program will detect

your system to nd out the driver

needed to be installed.

Click on Install and the program will begin to install the proper driver for your system.

When the driver installation completes, there will be a dialogue appears asking you to restart the system. Please click on YES to restart your computer.

For more information of the mainboard setup and BIOS setup, please refer to the full version manual in the setup CD.

In the Setup CD auto-run program,

click on Manual and then click on Mainboard User Manual or BIOS User Manual.