Bio Bidet BB-800 User Manual

PERSONLAL HYGIENE APPLIANCE

Installation Manual and
Operating Instructions

lifestyle Upgrade

BB-800 & BB-1000

This Product should be installed according to this manual.

Please read this manual carefully and install properly.

Please keep this manual for future reference.

Please register Warranty for proper service.

lifestyle Upgrade

Thank you for purchasing Bio Bidet Advanced Toilet Seat

This unit was manufactured for household use.

Installation Manual and Operating Instructions

2

lifestyle Upgrade

Contents

PREP ARA TION

IMPORTANT SAFEGUARDS /

GENERAL CAUTIONS

CAUTIONS BEFORE INSTALLATION

CARTON CONTENTS / IDENTIFICATION

OPERATION (BASIC)

OPERATION (DETAILS)

INSTALLATION

SEPARATION OF THE UNIT FROM

THE TOILET BOWL

4

6

8

OPERA TION INST ALLA TION MAINTENANCE

9

10

14

17

MAINTENANCE

WATER DRAINING

TROUBLE SHOOTING

SPECIFICATIONS

WARRANTY

INFORMATION TO THE USER

Installation Manual and Operating Instructions

18

19

20

21

22

23

3

lifestyle Upgrade

1

IMPORT ANT SAFEGU ARDS / GENERAL CAUTIONS

READ ALL INSTRUCTIONS BEFORE INSTALLATION AND USE

The following terms are used in this manual to indicate hazards of varying degrees of severity

DANGER

WARNING

CAUTION

DANGER - To reduce the risk of electrocution

WARNING - To reduce the risk of burns, electrocution, fire, or injury to persons

PLEASE OBSERVE THE FOLLOWING PRECAUTION BEFORE USING THIS PRODUCT

Do not dismantle

Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.

Indicates potentially hazardous situation which, if not avoided,
could result in death or serious injury.

Indicates potentially hazardous situation which, if not avoided, may result in minor or
moderate injury or in damage to the product or other property.

Do not open the product to repair or remodel.
Only qualified service personnel should service this product.
Do not use attachments not recommended by the manufacturer.

Connect this product to cold water supply pipe
carrying portable water.
Do not connect to an industrial water supply line that

Prohibited

Prohibited

Prohibited

Installation Manual and Operating Instructions

4

does not carry water of drinking quality.
This will negatively effect hygiene and performance.

About Low Temperature Burns-

A burn occurs when the skin has been exposed to high temperatures. However,
a low temperature burn may occur when the skin has been in contact with an
object at relatively low temperature (about 104 ℉). Close supervision is
necessary when this product is used by children or adults with sensitive skin.

If using any chemical toilet bowl cleaner, be sure to
wipe up any spills that splash onto Electric Bidet.
Do not use benzene or any acid chemical detergent.
Only neutral detergent permitted.

Prohibited

Grounding

Do not spray water

lifestyle Upgrade

PREP ARA TION

Do not plug in the power cord before connecting
the water supply hose.

This product must be grounded.
An approved Ground Fault Circuit Interrupt must be used.

Do not splash water on this product. Please provide
adequate ventilation to avoid damage to electronic
components due to high level of humidity.
It is necessary to provide adequate ventilation with a
fan, open door or open window when bathing.

Wet hands prohibited

Observe at all times

Observe at all times

Use of fire prohibited

Do not touch the power cord with wet hands.
Do not reach for a product that has fallen into water.
Unplug immediately!

This product must be connected to a standard
voltage power source. Do not connect power
cord if the cord is damaged or broken.
Do not plug the unit into a loose electric outlet.

Please disconnect the power cord when you clean
this product or detach it from toilet bowl.
Do not supply electrical power to the unit until the
plumbing work has been completed.

Keep the electrical cord away from heated surfaces to
prevent a fire hazard. Also, keep any flammable materials
away from this product at all times.

Installation Manual and Operating Instructions

5

lifestyle Upgrade

CAUTION

Prohibited

Prohibited

Prohibited

Observe at all times

Never operate this product if it is not
working properly, if it has been
dropped or damaged, or dropped into
water. Return the product to a service
center for examination and repair.

Do not stand or sit
on the seat cover lid.
It is not designed to
support a user’s
body weight.

Do not strain or push the connected hose and tube connecter;
it may cause water leakage. Never drop or insert any object
into any opening or hose. Use proper plumbing supplies if any
modification is to be made.

Use this product only as
described in the operating
instructions. Never use while
sleeping or drowsy.
Do not use while bathing.

Prohibited

Prohibited

Observe at all times

Do not obstruct or
put anything into the
dry air outlet. Do not
apply excessive force
to the shower nozzle.

Allow the seat
and lid to close
automatically
do not force the
lid closed.

Be careful so that
this product does not
become stained with
excrement and urine.

Drain the water from unit and unplug the power if it is
not going to be used for an extended period of time.
Refer to page 19

Observe at all times

- SAVE THESE INSTRUCTIONS -

2

CAUTIONS BEFORE INSTALLA TION

WIRING REQUIREMENT

THIS PRODUCT MUST BE PLUGGED into a regular voltage Grounded GFCI outlet (North
America 120V ac, 60Hz / Europe 220-240V~ , 50/60Hz). The rated power consumption is 660W /
600-700W. In locations where only a standard two-prong outlet is available, it is the responsibility
of the user to install a grounded three-prong outlet. Using a higher voltage is dangerous and may
result in a fire or other accident. This product is not responsible for damage resulting from the use of
it on other than specified voltage, or operating it without proper grounding.

Installation Manual and Operating Instructions

6

lifestyle Upgrade

This Product must be on a separate circuit. No other
appliance should share the circuit with this product.

WARNING

Sharing a circuit could cause the branch circuit fuse to blow
or the circuit breaker to trip. Continuous usage under these
conditions could result in fire or property damage.

GROUND INSTRUCTIONS

(1) This product has a three-prong grounding plug, which must be plugged into an outlet that is properly installed and

grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. If repair or replacement of the cord or plug is necessary, do not connect the
grounding wire to either flat blade terminal. The wire with insulation having an outer surface that is green with or
without yellow stripes is the grounding wire. Check with a qualified electrician or serviceman if the grounding
instructions are not completely understood, or if in doubt as to whether the product is properly grounded.

(2) This product is for use on a nominal 120V circuit, and has a grounding plug that looks like the plug illustrated in

sketch A in Figure 1. A temporary adapter, which looks like the adapter illustrated in sketches B and C, may be
used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available.
The temporary adapter should be used only until a properly grounded outlet (sketch A) can be installed by a qualified
electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by the screw.

PREP ARA TION

GROUNDED
OUTLET

GROUNDING PIN

GROUNDED
OUTLET BOX

ADAPTER

METAL SCREW

- Figure 1-

ADAPTER

TAB for
Grounding Screw

This appliance has to be earthed.

OPTIONAL GROUND INSTRUCTIONS

IMPROPER GROUNDING CAN RESULT IN A RISK OF ELECTRIC SHOCK.

DANGER

The use of an extension cord is not recommended or advised. If it is necessary to use an extension cord, use
only a three-prong extension cord (one to one), and a three slot built-in GFCI receptacle that will accept the
plug on this product. The marked rating of the extension cord should be equal to or greater than the electrical
rating of the unit (10amp). Consult a qualified electrician or service person if you are not sure whether the unit is
properly grounded.

Electric wiring has to be done in accordance with all local codes,
or in the absence of local codes, with the National Electrical Codes.

Installation Manual and Operating Instructions

7

lifestyle Upgrade

3

1

IDENTIFICA TION

MAIN UNIT

BB-800

Posterior Wash Nozzle

Feminine Wash Nozzle

Control Panel for BB-800

Caution Label

Lid

Operation LED Window

Deodorizer
(Only BB-1000)

Dryer Vent

Turbo Wash Nozzle

BB-1000

Simple Operation Panel

For

BB-1000

Feminine Wash Nozzle

VORTEX Wash Nozzle

Posterior Wash Nozzle

ACCESSORIES

2

T-Valve and Washer

3/8” Spare Nut
(With Packing)

Mounting Bolts (2 pcs)

Water Supply Hose to Bidet

Water Supply Hose to Fill Valve

Operation
Guide

Cone Packing (2 pcs)

User
Operating
Manual

Drain / Quick Release

Digital Occupied Sensor

Heated Seat

Nuts (2 pcs)

Bolt Guide (2 pcs)

Deodorizer Filter Cartridge/

Parts for BB-1000 only

Remote

Remote control

control

Bracket

Catch Plate (1 pc)

Carbon Deodorant

(BB-1000 Models)

Battery (2pcs)

1.5V AA

Installation Manual and Operating Instructions

8

lifestyle Upgrade

4

OPERA TION (B ASIC)

BB-800 Control Panel

Adjust the water pressure and
warm air dryer temperature.

Adjust the osillation funtion and
nozzle position(5 levels).

BB-1000 Remote Control

Adjust the water and
seat temperature(3 levels).

Power Saving
mode button.

Simple Operation Pane

OPERA TION

l

Adjust the water
pressure and
warm air dryer
temperature.

Adjust the osillation
funtion and
nozzle position
(5 levels).

Adjust the water and
seat temperature(3 levels).

Power Saving
mode button.

•When you sit on this product, please sit down on the central position
in order to activate the sensor.

•After an extended wash, allow water to be reheated for 3 minutes.

Installation Manual and Operating Instructions

Stop

Posterior Wash

Feminine Wash

9

lifestyle Upgrade

5

1

•Check for any water leaks.

•Plug the unit into the proper power source and the LED power light will start flashing.

•Wait until the LED power light stops flashing and becomes solid red.

•The water tank will be filled after pushing a “Wash”( or ) button.

•When the water tank is filling the buzzer “Beeps”continuously,
after the water tank is full the buzzer will end with “One Solid Beep”.

2

OPERA TION (DETAILS)

PREPARATION

OPERATION

SIT DOWN ON THE SEAT

•

When you sit down on the seat, the ORANGE LED lamp on the control panel will light up.

•

When the digital sensor on the seat is activated, the operation LED window on the main unit
will light “Occupied sensor”and simultaneously, the deodorizer fan will start to work.
(BB-900 / 1000 Models)

•See page 11 for details about changing the seat or water temperature.

STOP

•Press this button to stop all operation.

CLEANSING

•CLEANSING 1. (Posterior Wash)

1- Press “Posterior Wash”( ). Automatically, the nozzle comes out and

sprays warm water to posterior.

2- Additional functions during your Posterior Wash experience are available. See Oscillation,

pg.12 and Massage, pg. 13 for details.

•CLEANSING 2. (Feminine Wash)

1- Press “Feminine Wash”( ). Automatically, the nozzle comes out and

sprays warm water to feminine area.

2- Additional functions during your Feminine Wash experience are available. See Oscillation,

pg.12 and Massage, pg. 13 for details.

•

CLEANSING 3. (Turbo Wash / Vortex Wash)

1- Press “Turbo Wash”or “Vortex Wash”, the nozzle spray is more or

focused to produce the effect of strong wash, to help stimulate bowel movement.

2-

Press “Water pressure - High & Low button”to adjust the water pressure.

Installation Manual and Operating Instructions

10

lifestyle Upgrade

CAUTION

DO NOT ALLOW CHILDREN TO USE THE TURBO WASH or VORTEX WASH FUNCTION!
SUPERVISION IS STRONGLY RECOMMENDED FOR THE ELDERLY OR OTHER PERSONS

Observe at all times

CLEANSING cont.

•CLEANSING 3. (Turbo Wash or Vortex Wash)

1- Press “Turbo Wash”or “Vortex Wash”continuously for 3 to 5 seconds. Automatically, the water

2- If necessary, adjust “Position”of water stream with the ( / )buttons.
3- Press “Water pressure High & Low button”( / )to adjust the water pressure

4- Press the “STOP”( )button when you feel your abdomen is full or wait until

5- You will shortly feel the urge to push the water out of your colon, push the water and feces

6- Relax for a few minutes and be sure you feel your colon is empty and then use

THAT MAY HAVE LIMITATIONS IN BODY MOVEMENT, ILLNESS OR DISABILITIES!

nozzle comes out and sprays a warm stream of water to the posterior center of the rectum.

to your desired comfort.

the “Turbo Wash”or “Vortex Wash”function stops, approximately 1 minutes.

out as thoroughly as you can.

the “Posterior Wash”and “Air Dry”function to finish.

OPERA TION

WARM AIR DRYER

1- Press “Dry”( ), warm, dry air is gently directed to washed area for about 3 minutes.
2- You may adjust the warm air temperature by pressing High( ) and Low( ) buttons.
※This product memorizes the air temperature of prior use.

WATER PRESSURE ADJUSTMENT

•After sitting down on the this product, the LED lamp( ) for water
pressure on the Power Control will light at third or middle level( )

•Press high( ) , or low( ) to adjust the pressure of the water spray to
your desired comfort level

WARM WATER TEMPERATURE
AND SEAT TEMPERATURE ADJUSTMENT

•The temperature of water and seat are adjustable to the desired level by pressing

the “WATER”( )and “SEAT”( ) button.

WATER TEMPERATURE

Room temperature approx. 93.2℉ (34

℃

) 98.6℉ (37℃) 104℉ (40℃)

SEAT TEMPERATURE

Room temperature approx. 93.2℉ (34

℃

) 98.6℉ (37℃) 104℉ (40℃)

Installation Manual and Operating Instructions

11

lifestyle Upgrade

5

OPERA TION (DETAILS)

NOZZLE POSITION ADJUSTMENT

•Nozzle position is adjustable to the desired position by pressing “Front”( ) or

“Rear”( ) button from 1 to 5 positions.

After using this product, the nozzle will return to position 3.

DEODORIZER

•The deodorizer fan is activated when this product is occupied.

When finished, the fan will stop after 1 minute.

•Air current for the deodorizer has 4 adjustable levels. While pressing the “STOP”( ) button,

press the “WATER”( ) button to the desired air current level. See diagram:

+

(Level1~4)

1 Level

OFF

(BB-1000 Model Only)

2 Level 3 Level 4 Level

Deodorizer

(Air Current)

Occupied 

Low Speed

After using 

Low Speed

Deodorizer

(Air Current)

Occupied 

Low Speed

After using 

High Speed

Deodorizer

(Air Current)

Occupied 

High Speed

After using 

High Speed

OSCILLATION

•When using Posterior or Feminine Washing functions, pressing the “MOVE”( , )

button will provide a short-motion, front to back oscillating spray for a much wider cleansing
experience. Note: This funtion will not work during the “Turbo Wash”or “Vortex Wash”function.

•

You may change the position of the Oscillating spray by pressing the “MOVE

button again and “Front”( ) or “Rear”( ) buttons simultaneously.

Push the “MOVE

•

Auto-Setting of Oscillation Feature

•You can set this function to automatically oscillate whenever the seat is occupied and the Posterior or

Feminine washes are in operation.

Step 1: Do not sit on the this product.
Step 2: Press the “MOVE”( , ) button for 3 seconds or until you hear a single Chime.
Step 3: Sit on the this product and proceed with Posterior or Feminine Wash.
Note

: In the automatic setting, you may still adjust the position of the Oscillating spray by pressing the

“Front”( ) or “Rear”( ) buttons.

Canceling the Automatic Oscillation function
Step 1: Do not sit on the this product.
Step 2: Press the “MOVE”( , ) button for 3 seconds or until you hear a double Chime.

Installation Manual and Operating Instructions

12

( Nozzle Movement Function)

”( , )

”( , )

button again and the oscillation motion will stop automatically.

lifestyle Upgrade

MASSAGE (Rhythm Wash)

•When using the Posterior Wash or Feminine Wash functions, pressing the “MASSAGE”( , )

button will provide a pulsation spray.

•You may change the pressure of the spray by pressing the “High”( ) button or

“Low”( ) buttons.

•Push the “MASSAGE”( , ) button again and the pulsating action will stop automatically.

Auto-Setting of Massage Feature

•You can set this function to automatically pulsate whenever the seat is occupied and the Posterior

or Feminine washes are in operation.

Step 1: Do not sit on the this product.
Step 2: Press the “MASSAGE”( , ) button for 3 seconds or until you hear a single Chime.
Step 3: Sit on the this product and proceed with Posterior or Feminine Wash.
Note

: In the automatic setting, you may still adjust the pressure of the pulsating spray by

pressing the “high”( ) or “low”( ) functions.

Canceling the Automatic Oscillation function
Step 1: Do not sit on the this product.
Step 2: Press the “MASSAGE”( , ) button for 3 seconds or until you hear a double Chime.

OPERA TION

ECONOMY (Energy Save Mode)

- The ENERGY SAVER is not on when the LED light is off.

- Press button once to choose“ECONOMY 1”

- Press button again to choose“ECONOMY 2”

- Press button third time to turn “ECONOMY”off

✽The ECONOMY 1 : the water temperature will be kept at 90
✽The ECONOMY 2 (SMART MODE) : this will lower the water temperature to 90℉

being used, and raise the water temperature back to normal level during the time of use.
It takes about 5 days for the unit to“learn”, and “remember”, the usage pattern of the user(s)

℉(32℃)

(32℃)

when it is not

NOZZLE CLEANING (Automatically)

•

This product has an automatic nozzle self-cleaning function that cleans the nozzle before and after each use.

NOZZLE CLEANING (Manual)

•Nozzle can be cleaned manually by pressing “Posterior Wash”( / ) button for 3 seconds
without being occupied on the seat and nozzle will come out without spraying water. After cleaning
the nozzle, Press “Stop”( , ) button to return nozzle to stand-by mode.
( , : in Simple Operation panel -Remote Model)

CHIME SOUND ON/OFF SET

•While sitting on the this product, press “MOVE”( , ) button for 3 seconds and you can hear
the chime sound change to ON or OFF. (Remote model doesn’t have off function, BB-1000)

Installation Manual and Operating Instructions

13

Lifestyle Upgrade

6

INST ALLATION

CAUTION BEFORE INSTALLATION

•Do not plug in before installation.
If you need an electric power system or extension, please consult a qualified electrician.

•

STEPS

Turn Off Water.

1

•Shut off the water supply shut off valve.
Drain the toilet tank completely.
Then remove the existing fill valve

water supply hose.

Removing the existing seat and lid.

2

•Remove mounting bolts to release existing
toilet seat from toilet.

Connect T-Valve.

3

•Remove existing supply tube from fresh tank

•Connect supplied 1/2" T-Valve Adaptor.
Use 3/8" conversion nut if existing shut off
valve is 3/8".

※Check for any water leaks.

Installation Manual and Operating Instructions

14

Flexible Tube

3/8" conversion nut
with packing

Water Supply to Tank Assembly.

4

•Connect supplied fill valve water supply hose as
illustrated.

lifestyle Upgrade

Installation Catch Plate. Bolt and Nut Assembly.

5

Place the plate and guides over each mounting hole.
Insert the mounting bolts through the plate and
mounting holes.

Bolt Guide

Bolt

catch plate

6

Slide cone packing and washers onto the bolts
then fasten to securely mount bidet seat to toilet.

Cone Packing

Nut

Assembly. Water Supply Tube Assembly.

7

1. Slide this product onto the catch plate
centering the unit with the guide arrows on the Base.

2. You will hear a click once this product is securely
mounted to the catch plate.

3. This product will feel a little loose on the toilet bowl.
Adjust the fit from front to back and side to side for balance.

4. Tighten the nuts on both bolts securely.

8

1. Connect the flexible tube from side of
T-Valve to this product.

2. Open water valve.

3. Check for leaks.

4. If there are no leaks and the surrounding

area is clean and dry, connect the power
cord to a ground protected power outlet.

INST ALLA TION

※Check for any water leaks.

Installation Manual and Operating Instructions

15

lifestyle Upgrade

6

9

1

INST ALLATION

Deodorizer Installation.

Insert the deodorant cartrige into the unit.
(BB- 1000 Only)

•Deodorant assembly diagram.

•Follow the below photos to change the deodorant.

Deodorant case

Deodorant

Cover

How to change the deodorant catalyst

Insert the new deodorant case into the unit.

2

10

Wireless remote mounting guide. (BB-1000)

1. Remove adhesive from back of bracket and

2. Place remote into remote bracket.

Adhesive Tape

Installation Manual and Operating Instructions

16

place bracket where desired.

Insert supplied batteries and

close battery cover

lifestyle Upgrade

7

1

2

3

4

SEPARA TION OF UNIT FROM THE T OILET BO WL

Disconnect the power plug.

Close water supply shut-off valve.

Drain water from bidet seat using drainage
as illustrated.

Remove bidet seat from toilet as illustrated.

-Drainage is also release button from catch plate.

INST ALLA TION

Do not turn unit upside down.

Installation Manual and Operating Instructions

17

lifestyle Upgrade

8

MAINTENANCE

CLEANING THE NOZZLE

•When the “Posterior Wash (
for 3 seconds without occupying the seat, the nozzle can be
cleaned with a soft toothbrush.

( : in Simple Operation panel -Remote Model)

•After cleaning the nozzle, push the “Stop ( , )”
button once again, and the nozzle retracts itself.

( : in Simple Operation panel -Remote Model)

)”button is pressed

/

CLEANING THE BODY OF UNIT

•When you clean this product, do not use thinner, benzene or

toilet bowl cleaner. It may cause damage to the surface of unit.

•Use a wet cloth when you clean this product.

•Do not spray water directly on to this product.

•When you clean this product, disconnect the power plug.

CLEANING THE STRAINER

This product will not operate
properly if the strainer is clogged.
Please clean the strainer regularly.

1) Close the water shut off valve.

2) Flush the toilet to empty the water reservoir.

3) Unscrew the water filter nut.

4) Clean the strainer with a small brush or water.

5) Re-screw the water filter nut.

6) Open the water shut off valve.

Installation Manual and Operating Instructions

18

BB-800

BB-1000

lifestyle Upgrade

9

If you do not intend to use this product for 14 days or longer,
drain the water from this product’s warm water tank.

1) Disconnect the power plug.

2) Close the water shut off valve.

3) Press the drain lever until the water is

4) To re-supply water after draining,

WA TER DRAINING

DRAINING THE WARM WATER TANK IN THE UNIT

completely drained from water tank.

open the water shut off valve.

Do not drink the drained water.
Do not insert finger into the drain hole.
Before draining, unplug the power cord and wait 30 minutes until the unit has cooled down.

MAINTENANCE FOR WINTER SEASON

Check the power cord if it is plugged in or not.

1

Keep the water temperature on “Middle or High Level” to prevent water from freezing.

2

If you do not intend to use the unit for 14 days or longer, disconnect the power

3

plug and drain the water.

Installation Manual and Operating Instructions

MAINTENANCE

19

lifestyle Upgrade

10

TROUBLE SHOO TING

Trouble Cause Remedy

1. Wait about one minute.

2.Press the desired washing

button once again.

3.Turn on the shut off valve to

open.

4.Heat the room (for about two

hours). Operating the unit while

parts are frozen will cause a

malfunction.

1.Connect the power cord.

2. Check the power supply

system in your house.

3.Occupy the seat (The unit has

an occupied sensor).

4.Replace the battery.

The washing water
does not spray

The unit is not
operating

1.The water tank is not filled.

2.The shut off valve is closed.

3. Freezing inside the main unit

or the water supply pipe.

1.Disconnected the power cord.

2.The seat is not occupied.

3. The battery of remote

controller is exhausted.

(Only BB-1000 model)

1.Check the water supply system

Water is leaking

The washing water
pressure is weak

The washing water
is not warm

The seat and dryer
is not warm

Installation Manual and Operating Instructions

20

1.The water pressure level is set to

“LOW”.

2.The strainer is clogged.

1.The water temperature is set to

“LOW”.

2.Continuous operation has

depleted the supply of warm

water.

1.The seat & dryer temperature is

set to “LOW”

1. If water is leaking from the

main unit, call the service

center or the place you

purchased unit.

1.Set the water pressure to

“HIGH”.

2.Clean the strainer.

1.Set the water temperature to

“HIGH”

2. Wait about three minutes.

1. Set the seat & dryer

temperature to “HIGH”.

lifestyle Upgrade

11

Water inlet type

SPECIFICA TIONS

Specification

Power Rating

Type

Water inlet pressure

Power cord

Posterior Wash

Feminine Wash

Wash

Device

Water Pressure

Adjustable

Warm Water

Temperature

Heater

Safety Devices

Temperature

BB-800 BB-1000

Australia or Europe: 220 - 240V~, 50/60Hz , 600 - 700W

America or Canada: 120Vac, 60Hz, 660W

Direct Inlet flow type

0.4 ~ 7.5 kgf/㎠( 5.69 psi ~ 106.7psi )

(1.2m (4 feet): AMERICA) / (1.8m:Australia or Europe)

Max. 1.2ℓ/min ( Max. 0.32 GPM )

Max. 1.2ℓ/min ( Max. 0.32 GPM )

5 Levels

℃

Room Temp - 40

Thermal fuse, Thermal switch, Float switch

Room Temp ~ 40

( Room Temp. 104℉)

600 W

℃

( Room Temp. ~ 104℉)

Heated Seat

Warm

Air Dryer

Device

Heater

Safety Device

Adjustable Dry Temperature

(Room Temp~45℃)

Heater

(250W)

Safety Device

(Themal fuse, bimetal)

Turbo& Vortex Function

Deodorizer

Remote control

Inlet water temperature

Ambient Temperature

Dimension

Weight (kg)

55 W

Thermal fuse

○

○

-

-

3℃~ 35℃ ( 37.4℉ ~ 95℉ )

3℃~ 40℃ ( 37.4℉ ~ 104℉ )

Elongated(Control) Elongated (Remote)Round (Control) Round (Remote)

W : 495mm (19.4 inch)

L : 525mm (20.6 inch)

H : 185mm (7.28 inch)

5.3kg 5.4kg 5.2kg

W : 495mm (19.4 inch)

L : 493mm (19.4 inch)

H : 185mm (7.28 inch)

W : 475mm (18.7 inch)

L : 525mm (20.6 inch)

H : 185mm (7.28 inch)

Installation Manual and Operating Instructions

○

○

○

○

W : 475mm (18.7 inch)

L : 493mm (19.4 inch)

H : 185mm (7.28 inch)

MAINTENANCE

21

lifestyle Upgrade

12

WARRANTY

Three Years Limited Warranty

1. 100% Coverage of all parts and labor for the entire product for the first year from original date of purchase

2. 75% Coverage of all parts and labor for the entire product for the second year from original date of purchase

3. 50% Coverage of all parts and labor for the entire product for the third year from original date of purchase

BBC Innovation warrants its products to be free from manufacturing defects under normal use and service for a period of

three (3) years prorated base as above from date of purchase. This warranty is extended only to the ORIGINAL PURCHASER.

BBC Innovation’s obligations under this warranty are limited to repair or replacement, at BBC Innovation’s option, of

products or parts found to be defective, provided that such products were properly installed and used in accordance with

instructions. BBC Innovation reserves the right to make such inspections as may be necessary in order to determine the

cause of the defect. BBC Innovation will not charge for labor or parts in connection with warranty repairs or replacements.

BBC Innovation is not responsible for the cost of removal, return and/or reinstallation of products.

This warranty does not apply to the following items:

Damage or loss sustained in a natural calamity such as fire, earthquake, flood, thunder electrical storm, etc.

Damage or loss resulting from any unreasonable use, misuse, abuse, negligence, or improper maintenance of the product.

Damage or loss resulting from removal, improper repair, or modification of the product.

Damage or loss resulting from sediments or foreign matter contained in a water system.

Damage or loss resulting from improper installation or from installation of a unit in a harsh and/or hazardous environment.

This warranty gives you specific legal rights. You may have other rights which vary from state to state.

To obtain warranty repair service under this warranty, you must take the product or deliver it prepaid to a BBC Innovation

service facility together with a letter stating the problem, or contact a BBC Innovation distributor or products service

contractor, or write directly to BBC Innovation Corporation, 205 Bert Street, Algonquin, IL 60102.

This written warranty is the only warranty made by BBC Innovation. Repair or replacement as provided under this warranty

shall be the exclusive remedy available to the purchaser. BBC Innovation shall not be responsible for loss of the product or for

other incidental, special or consequential damages or expenses incurred by the purchaser, or for labor or other costs due to

installation or removal, or costs of repairs by others, or for any other expense not specifically stated above. Except to the

extent prohibited by applicable law, any implied warranties, including that of merchantability or fitness for use, are expressly

limited to the duration of this warranty. Some states do not allow limitations on how long an implied warranty lasts, or the

exclusion or limitation of incidental or consequential damages, so the above limitation and exclusion may not apply to you.

Warning! BBC Innovation shall not be responsible or liable for any failure of, or damage to, this plumbing product or product

component caused by either chloramines in the treatment of public water supply or in-tank bowl cleaners containing chlorine

(calcium hypochlorite).

Note: The use of high concentration of chlorine or chlorine related products can seriously damage the fittings.
This damage can cause leakage and serious property damage.

Installation Manual and Operating Instructions

22

lifestyle Upgrade

13

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more
of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

INFORMA TION T O THE USER (F or America)

WARNING

Changes or modifications not expressly approved by the manufacturer could void the user's authority to
operate the equipment.
Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

For Service & Technical Support, call or write to:

BBC Innovation Corporation
205 Berg St
Algonquin, IL 60102
U.S.A

Tel

: 847.458.2334
Fax: [phone]
Support:@biobidet.com

MAINTENANCE

Installation Manual and Operating Instructions

23

www.biobidet.com

BBC Innovation Corporation