Binatone DECT Combo Plus Single, iDECT Carrera Combo Plus User Manual
USER GUIDE
Combo
ComboCombo
Combo Plus
Plus Plus
Plus Single
SingleSingle
Single/Twin/Triple/Quad
/Twin/Triple/Quad/Twin/Triple/Quad
/Twin/Triple/Quad
DECT
DECTDECT
DECT
Te
TeTe
Te
llll
ephone
ephoneephone
ephone
wwww
iiii
th
thth
th Answer
AnswerAnswer
Answering
inging
ing Mach
MachMach
Mach
iiii
ne
nene
ne
Binatone
BinatoneBinatone
Binatone
HHHH
elpline
elplineelpline
elpline
(for
(for(for
(for
UK
UKUK
UK
only)
only)only)
only)
Monday to Friday from 9:00am to 5:00pm
T
el: 0845 345 9677**
**Please note that all calls are charged at local rate
Or visit our website:
www.iDECTonline.com
www.iDECTonline.comwww.iDECTonline.com
www.iDECTonline.com
Before operating this set,
Before operating this set,Before operating this set,
Before operating this set,
please read these instructions carefully.
please read these instructions carefully.please read these instructions carefully.
please read these instructions carefully.
THE CORDLESS HANDSET
THE CORDLESS HANDSETTHE CORDLESS HANDSET
THE CORDLESS HANDSET IS
ISIS
IS NOT
NOTNOT
NOT DESIGNED
DESIGNEDDESIGNED
DESIGNED FOR
FORFOR
FOR MAKING
MAKING MAKING
MAKING
EMERGENCY
EMERGENCYEMERGENCY
EMERGENCY TELEPHONE
TELEPHONETELEPHONE
TELEPHONE CALLS
CALLSCALLS
CALLS WITHOUT MAINS POWER
WITHOUT MAINS POWERWITHOUT MAINS POWER
WITHOUT MAINS POWER; BUT IF
; BUT IF ; BUT IF
; BUT IF
THERE IS A POWER FAILURE, YOU CAN STILL USE THE BASE AND
THERE IS A POWER FAILURE, YOU CAN STILL USE THE BASE AND THERE IS A POWER FAILURE, YOU CAN STILL USE THE BASE AND
THERE IS A POWER FAILURE, YOU CAN STILL USE THE BASE AND
THE CORDED HANDSET TO
THE CORDED HANDSET TO THE CORDED HANDSET TO
THE CORDED HANDSET TO MAKE AN EMERGENCY CALL.
MAKE AN EMERGENCY CALL.MAKE AN EMERGENCY CALL.
MAKE AN EMERGENCY CALL.
TECHNICAL
TECHNICALTECHNICAL
TECHNICAL
DETAILS
DETAILSDETAILS
DETAILS
Standard
StandardStandard
Standard
Digital Enhanced Cordless Telecommunication
(DECT)
Frequency range
Frequency rangeFrequency range
Frequency range
1.88 to 1.9 GHz (bandwidth = 20 MHz)
Channel band
Channel bandChannel band
Channel band
width
widthwidth
width
1.728 MHz
Operating range
Operating rangeOperating range
Operating range
Up to 300m outdoors; Up to 50m indoors
Operating time
Operating timeOperating time
Operating time
Standby:
230
hours
; Talking:
13 hours
Battery charge time:
15 hours
Temperature range
Temperature rangeTemperature range
Temperature range
Operating
: 0oC to 40
o
C; Storage
: -20oC to 60
o
C
Electrical power
Electrical powerElectrical power
Electrical power
Base unit
Base unitBase unit
Base unit
power
powerpower
power
adapter
adapteradapter
adapter
::::
Ten Pao: S003IB0600050 & S003IV0600050
Input 100-240Vac 50-60Hz; Output 6Vdc/500mA.
Charger unit
Charger unitCharger unit
Charger unit power adapter
power adapterpower adapter
power adapter::::
Ten Pao: S003IB0600015 & S003IV0600015
Input 100-240Vac 50-60Hz; Output 6Vdc/150mA.
Battery information
Battery informationBattery information
Battery information (each handset)
(each handset)(each handset)
(each handset)::::
2 X 1.2V AAA size, 650mAh NiMH (Rechargeable)
CAUTION
CAUTIONCAUTION
CAUTION
Risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Port specification
Port specificationPort specification
Port specification
The
port (connected to the mains power supply) is a SELV port with
respect to EN41003.
The port (connected to the telephone line) is a TNV port with
respect to EN41003.
CLEANING AND CARE
CLEANING AND CARECLEANING AND CARE
CLEANING AND CARE
Do not clean
Do not cleanDo not clean
Do not clean any part of your phone system with benzene, thinners or
other solvent chemicals as this may cause permanent damage, which is
not covered by the Guarantee.
When necessary, clean it with a damp cloth.
When necessary, clean it with a damp cloth.When necessary, clean it with a damp cloth.
When necessary, clean it with a damp cloth.
Keep your phone system away from hot, humid conditions or strong
hot, humid conditions or strong hot, humid conditions or strong
hot, humid conditions or strong
sunlight,
sunlight,sunlight,
sunlight, and don't let it get wet.
don't let it get wet.don't let it get wet.
don't let it get wet.
Every effort has been made to ensure high standards of reliability for
your phone system. However, if something does go wrong, please do not
do not do not
do not
try to repair it yourself, but consult your supplier or call the Helpline.
try to repair it yourself, but consult your supplier or call the Helpline.try to repair it yourself, but consult your supplier or call the Helpline.
try to repair it yourself, but consult your supplier or call the Helpline.
1
TABLE OF CONTENTS
TABLE OF CONTENTSTABLE OF CONTENTS
TABLE OF CONTENTS
1
IMPORTANT SAFETY INSTRUCTIONS ................................................... 7
2
INSTALLING YOUR PHONE ................................................................. 10
2.1
Connecting the Corded Base Station ......................................... 10
2.2
Installing and Charging the Rechargeable Batteries of your
Cordless Handset ....................................................................... 10
3
Overview of the Corded Base............................................................ 12
3.1
Display Icons and Symbols on the Corded Base ........................ 15
4
USING THE CORDED BASE ................................................................. 17
4.1
Set Date & Time using the Corded Base .................................... 17
4.2
Make a call from the Corded Base ............................................. 17
4.2.1
Pre-dialling ....................................................................... 17
4.2.2
Direct dialling ................................................................... 17
4.3
Adjust Earpiece or Speaker Volume on the Corded Base .......... 18
4.4
Set Ringer Volume on the Corded Base ..................................... 18
4.5
Turn off Ringer on the Corded Base .......................................... 18
4.6
Lock/Unlock the Keypad on the Corded Base ............................ 18
4.7
Mute/Unmute the Microphone ................................................ 18
4.8
Initiate an Intercom Call from the Corded Base to a Registered
Cordless Handset ....................................................................... 19
4.9
Answer an External Call during an Intercom Call on the Corded
Base ........................................................................................... 19
4.10
Transfer an External Call from the Corded Base to a Cordless
Handset ................................................................................ 20
4.11
Initiate a Conference Call during a Call on the Corded Base 20
4.12
Call from the Redial List on the Corded Base ........................ 21
2
4.13
Store a pre-dial number to the Phonebook on the Corded
Base ...................................................................................... 21
4.14
Store a number from the Redial List to the Phonebook on the
Corded Base .......................................................................... 21
4.15
Access the Phonebook on the Corded Base ......................... 22
4.16
Store a Number to the Phonebook on the Corded Base ...... 22
4.17
Modify a Phonebook Entry on the Corded Base .................. 23
4.18
Delete a Phonebook Entry on the Corded Base ................... 23
4.19
Delete All Phonebook Entries on the Corded Base ............... 23
4.20
Access the Call Log on the Corded Base ............................... 24
4.21
Delete a Call Log Entry on the Corded Base ......................... 24
4.22
Delete All Call Log Entries on the Corded Base ..................... 25
4.23
Save a Call Log Entry into the Phonebook on the Corded
Base ...................................................................................... 25
4.24
Answering Machine Operations ........................................... 25
5
Overview of the Cordless Handset and Charging Pod ....................... 26
5.1
Display Icons and Symbols on the Cordless Handset ................ 29
5.2
Menu Map and Menu Navigation on the Cordless Handset ..... 31
5.3
Text and Number Entry on the Cordless Handset ..................... 32
5.3.1
Character Map ................................................................. 32
6
USING YOUR CORDLESS HANDSET .................................................... 33
6.1
Make a Call ................................................................................ 33
6.1.1
Pre-dialling ....................................................................... 33
6.1.2
Direct Dialling .................................................................. 33
6.1.3
Call from the Redial List ................................................... 33
6.1.4
Call from the Call Log ....................................................... 33
3
6.1.5
Call from the Phonebook ................................................. 33
6.2
Answer and End a Call ............................................................... 34
6.3
Handset Speakerphone ............................................................. 34
6.4
Adjust Earpiece Volume ............................................................. 34
6.5
Adjust Speaker Volume .............................................................. 34
6.6
Mute/Unmute the Microphone ................................................ 34
6.7
Paging ........................................................................................ 35
6.8
Switching the Handset On/Off ................................................... 35
6.9
To Lock/Unlock the Keypad ....................................................... 35
6.10
Make an Internal Call ............................................................ 36
6.11
Initiate an Intercom Call to the Corded Base ........................ 36
6.12
Initiate an Intercom Call with another Registered Cordless
Handset ................................................................................ 37
6.13
Answer an External Call during an Intercom Call .................. 37
6.14
Initiate an Intercom during a Call ......................................... 38
6.15
Transfer an External Call to another Handset ....................... 39
7
DIRECT ACCESS MEMORY ON A CORDLESS HANDSET ...................... 40
7.1
Add Direct Access Memory to a Cordless Handset .................... 40
7.2
Delete Direct Access Memory from a Cordless Handset ........... 41
8
PHONEBOOK ON A CORDLESS HANDSET .......................................... 42
8.1
Store a Phonebook Entry on your Cordless Handset ................. 42
8.2
Access the Phonebook on your Cordless Handset .................... 43
8.3
Modify a Phonebook Entry on your Cordless Handset .............. 43
8.4
Delete a Phonebook Entry on your Cordless Handset ............... 44
8.5
Delete All Entries from the Phonebook List on your Cordless
Handset ..................................................................................... 44
4
9
CALLER DISPLAY (NETWORK DEPENDENT) ON A CORDLESS
HANDSET ........................................................................................... 45
9.1
Call Log on your Cordless Handset ............................................ 45
9.1.1
Access the Call Log on your Cordless Handset ................. 45
9.1.2
Save a Call Log Entry into the Phonebook on your Cordless
Handset ............................................................................ 46
9.1.3
Delete a Call Log Entry on your Cordless Handset ........... 46
9.1.4
Delete All Entries in the Call Log on your Cordless
Handset ............................................................................ 46
9.2
Redial List on your Cordless Handset ........................................ 47
9.2.1
Access the Redial List on your Cordless Handset ............. 47
9.2.2
Save a Redial Number into the Phonebook on your
Cordless Handset ............................................................. 47
9.2.3
Edit a Redial Number on your Cordless Handset ............. 47
9.2.4
Delete a Redial Number on your Cordless Handset ......... 48
9.2.5
Delete All Entries from the Redial List on your Cordless
Handset ............................................................................ 48
10
CLOCK AND ALARM SETTINGS ON YOUR CORDLESS HANDSET . 49
10.1
Date and Time Settings ........................................................ 49
10.1.1
Change the Time Format on your Cordless Handset ....... 50
10.1.2
Change the Date Format on your Cordless Handset ........ 50
10.2
Alarm Settings on your Cordless Handset ............................ 51
10.2.1
Set the Alarm Tone on your Cordless Handset ................ 52
11
PERSONAL SETTINGS ON YOUR CORDLESS HANDSET ............... 53
11.1
Set the Ring Volume on your Cordless Handset ................... 53
11.2
Set the Ring Tone on your Cordless Handset ........................ 53
11.3
Set the Key Beep on your Cordless Handset ......................... 54
5
11.4
Rename your Cordless Handset ............................................ 54
11.5
Set the Display Language on your Cordless Handset ............ 55
11.6
Set Auto Hang-up on your Cordless Handset ....................... 55
12
ADVANCED SETTINGS on your cordless handset ....................... 56
12.1
Cordless Handset Registration .............................................. 56
12.2
Register Additional Cordless Handsets ................................. 56
12.3
Un-register your Cordless Handset ....................................... 57
12.4
Change the Master PIN from your Cordless Handset ........... 57
12.5
Set the Auto Prefix on your Cordless Handset ...................... 58
12.6
Change the Recall Time from your Cordless Handset .......... 59
12.7
Set the First Ring from your Cordless Handset ..................... 59
12.8
Reset the Cordless Handset .................................................. 60
13
OPERATING THE ANSWERING MACHINE FROM YOUR CORDLESS
HANDSET ................................................................................... 61
13.1
Turning the Answering Machine On/Off ............................... 61
13.2
Answer Mode ....................................................................... 62
13.2.1
Set Answer Mode ............................................................ 62
13.3
Answering Machine Settings ................................................ 62
13.3.1
Set the Ring Delay ............................................................ 62
13.3.2
Activate/Deactivate Remote Access ................................ 63
13.3.3
Change the Voice Language ............................................. 63
13.4
Message Playback ................................................................. 64
13.5
Delete All Messages .............................................................. 64
13.6
Outgoing Message (OGM) .................................................... 65
13.6.1
Record a Personal Outgoing Message ............................. 65
13.6.2
Listen to an Outgoing Message ........................................ 66
6
13.6.3
Delete a Personal Outgoing Message .............................. 66
13.7
Remote Access ...................................................................... 67
13.7.1
Access the Answering Machine Remotely ....................... 67
14
TROUBLESHOOTING .................................................................. 71
15
DECLARATION OF CONFORMITY ............................................... 75
16
GUARANTEE AND SERVICE ........................................................ 76
16.1
While the
unit is
under Guarantee
...................................... 76
16.2
After the Guarantee has expired
......................................... 76
7
1111 IMPOR
IMPORIMPOR
IMPORTTTTANT SAFE
ANT SAFEANT SAFE
ANT SAFETY
TYTY
TY INSTRUCTIONS
INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONS
Please follow these safety instructions when using your telephone
equipment to reduce risk of fire, electric shock and injury:
1) Read and understand all the instructions.
2) Follow all warnings and instructions marked on the product.
3) Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
4) Keep this product away from hot, humid conditions or strong
sunlight, and don’t let it get wet or use it near water (for example,
near a bath tub, kitchen sink, or swimming pool).
5) Do not overload wall outlets and extension cords as this can result
in the risk of fire or electric shock.
6) Unplug this product from the wall outlet and obtain the service of
our Repair Centre under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If the product fails to operate normally despite following the
operating instructions.
• If the product has been dropped and the cabinet has been
damaged.
• If the product exhibits a distinct change in performance.
7) NEVER use your phone outdoors during a thunderstorm. Unplug
the base from the telephone line and the mains socket when there
are storms in your area. Damage caused by lightning is not covered
by the guarantee.
8) Do not use the telephone to report a gas leak in the vicinity of the
leak.
9) Use only the supplied NiMH (Nickel Metal Hydride) batteries that
came with your phone or an authorised replacement
recommended by the manufacturer. There is a risk of explosion if
you replace the battery with an incorrect battery type. The use of
other battery types or non-rechargeable batteries/primary cells
can be dangerous. They may cause interference and/or damage
to the unit or surroundings. The manufacturer will not be held
liable for damage arising from such non-compliance.
10) Do not use third party charging pods. Damage may be caused to
the batteries.
11) Please ensure that the batteries are inserted in the correct polarity.
12)
Dispose of batteries safely. Do not burn, immerse them in water,
disassemble, or puncture the batteries.
8
Package
Package Package
Package CCCContent
ontentontent
ontent for single model
for single modelfor single model
for single model
The package contains the following items:
• 1 Cordless Handset
• 1 Corded Handset
• 1 Corded Base Station
• 1 Charging Pod for the Cordless Handset
• 1 Mains Power Adapter for the Corded Base Station
• 1 Telephone Line Cord for the Corded Base Station
• 1 Coiled Telephone Handset Cord for the Corded Handset
• 2 AAA NiMH Rechargeable Batteries for the Cordless Handset
• 1 Back Cover for the Cordless Handset
• 1 User Guide
Note:
Note: Note:
Note:
If you have purchased a Twin, Triple or Quad system, you will also
have the corresponding
extra cordless handset(s) and batteries, charging
pod(s) and a back cover for each extra cordless handset.
Connection and
Connection and Connection and
Connection and CCCConditions for
onditions for onditions for
onditions for UUUUse
sese
se
You can connect your phone to a direct exchange line (DEL) on a local
exchange with its own phone number; to an extension socket
connected to a DEL; or to an extension on an approved compatible PBX.
Do not connect as an extension to a pay phone.
The ringer equivalence numbers (REN) of all equipment (phones, fax
machines, modems, etc.) connected to an exchange line must not add
up to more than 4, otherwise one or more of them may not ring and/or
answer calls correctly. The phone has a REN of 1, and most other
telephones have a REN of 1 unless marked otherwise.
9
Cordles
CordlesCordles
Cordless
s s
s Handset
Handset Handset
Handset &&&& Base Connection
Base ConnectionBase Connection
Base Connection
1) When purchased, all cordless handsets are already registered to the
base unit and should link to it when they are all powered up.
2) To use your cordless handset and base unit together, you must be able
to establish a radio link between them. The signal between the
handset and the base unit is in accordance with the normal standards
for a DECT phone: Maximum range up to 300 metres outdoors or 50
metres indoors. Be aware that:
> Large metal objects, such as refrigerators, mirrors or filing cabinets,
between the handset and the base unit may block the radio signal.
> Solid structures, such as walls, may reduce the signal strength.
> Electrical equipment may cause interference and/or affect the range.
3) Do not place the base unit close to another telephone, TV or audio
equipment - it may cause interference.
4) Putting the base unit as high as possible ensures the best signal.
5) If the sound in the earpiece becomes faint or distorted during a call,
you may be going out of range of the base unit. Move nearer to the
base unit within 20 seconds; otherwise the line may be cut off.
10
2222 INSTALLING YOUR PHON
INSTALLING YOUR PHONINSTALLING YOUR PHON
INSTALLING YOUR PHONEEEE
2.1
2.12.1
2.1 Connecting the
Connecting the Connecting the
Connecting the Corded
Corded Corded
Corded BBBBase
ase ase
ase SSSStation
tationtation
tation
1) Plug the mains power cable,
telephone line cord and coiled
handset cord into the corded base
station.
2) Plug the other end of the coiled
handset cord into the corded
handset, making sure it clicks fully
into place.
3) Place the corded handset in the cradle of the corded base station.
4) Plug the power adapter into a 100 - 240Vac, 50 - 60Hz mains power socket,
and the telephone line cord into a telephone line socket.
Warning:
Warning:Warning:
Warning:
Always use the cables provided in the box. Use only the supplied adaptor.
Using other power cables may damage the unit.
Note
NoteNote
Note::::
Place the corded base unit within easy reach of the mains power socket.
Never try to lengthen the mains power cable.
The corded base station needs mains power for normal operation, and
the cordless handsets will not work without it.
2.2
2.22.2
2.2 Installing and
Installing and Installing and
Installing and CCCCharging the
harging the harging the
harging the RRRRechargeable
echargeable echargeable
echargeable BBBBatteries
atteriesatteries
atteries ooooffff
your Cordless Handset
your Cordless Handsetyour Cordless Handset
your Cordless Handset
1) Insert the 2 supplied batteries into the battery
compartment of the cordless handset, observing the
correct polarity (see markings inside battery
compartment).
Warning:
Warning:Warning:
Warning: Use only the supplied NiMH rechargeable batteries.
2) Place the back cover over the back of the cordless
handset and press down until it clicks into place.
3) Place the cordless handset on the charging pod and
charge for 15 hours before using the cordless
handset for the first time.
•
The cordless handset will give a double beep
when it is properly placed on a charging pod.
•
The battery charging indicator on the charging pod lights up to
indicate charging.
To the
telephone line
socket
To the mains
power socket
To the
corded
handset
11
Note:
Note:Note:
Note: The cordless handset may become warm when the batteries are
being charged or during prolonged periods of use. This is normal and
does not indicate a fault.
If you have a
If you have a If you have a
If you have a bbbbroadband line
roadband lineroadband line
roadband line
If you connect your telephone to a line with a broadband connection, you
will need to insert a micro-filter between the telephone and the
telephone line; otherwise you may get interference between the
telephone and the broadband, which could cause problems.
In a home with broadband, every telephone must have a micro-filter
connected, not just the one at the telephone point that your modem is
connected to.
If you need more broadband micro-filters contact your broadband
supplier.
12
3333 OVERVIEW OF THE CORD
OVERVIEW OF THE CORDOVERVIEW OF THE CORD
OVERVIEW OF THE CORDED BASE
ED BASEED BASE
ED BASE
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
13
①
HOOKSWITCH
HOOKSWITCHHOOKSWITCH
HOOKSWITCH
Press to end a call on a corded
h
andset.
Pressed down to end a call on a corded handset
when replacing the corded handset on the base.
Released to enter dialling mode or answer a call,
when picking up the corded handset off the
base.
②
3
In
standby mode, p
ress and hold
to
start
message playback on the answering machine.
During message playback, press to stop playback
and return to standby mode.
③
2
During message playback, p
ress
to skip
to the
next message.
④
C
In standby mode, press to acc
ess the call log
(CID).
In standby mode, press and hold to set date and
time.
In settings mode, press to confirm a setting.
⑤
R
In standby mode, p
ress to
show
the
last dialled
number.
⑥
#
In standby mode, press and hold to turn
the
base ringer On/Off.
When dialling, press and hold to add a dialling
pause.
⑦
*
In standby mode, press and hold to switch the
key lock on or off.
⑧
S
Press to make
or receive a
call
in
speaker
mode.
⑨
P
In standby mode, p
ress to access
the
Phonebook.
Press and hold to enter the phonebook
programming mode.
⑩
F
During a call, press to send a
Flash
FlashFlash
Flash
signal (also
called Recall) for network services.
⑪
LCD screen
LCD screenLCD screen
LCD screen
14
IMPORTANT
IMPORTANTIMPORTANT
IMPORTANT!!!!
In the event of a mains power failure, the cordless handsets will not
work, and the display on the corded base will be off, but the corded
handset can still be used to make or receive calls.
The corded base will still ring if there is an incoming call, and the call
can be answered with the corded handset, but there will be a delay
of up to 5 seconds after picking up the handset before the handset
becomes active and you can start a conversation.
If you want to make a call when the mains power is off, pick up the
corded handset and wait for approximately 5 seconds until you hear
the dial tone. Then dial the number you want to call. (The
phonebook, call log and redial memories will not be accessible when
there is no mains power to the base.)
⑫
M
During pre
-
dialling
or number editing
, press
to delete the last digit entered.
During a call, press to mute the microphone,
and press again to resume conversation.
⑬
4
During message playback, press to
repeat
the current message, and press twice to skip
back to the previous message.
⑭
+
-
In standby mode, p
ress
to adjust
base ringer
volume.
During a call, press to adjust the earpiece or
speaker volume.
When in the phonebook or call log, press to
scroll
through the entries.
⑮
Press to find / page all registered
cordless
handsets.
Press again to turn off the page signal.
Press and hold to start registration p
rocess.
15
3.1
3.13.1
3.1 Display Icons and Symbols on the Corded Base
Display Icons and Symbols on the Corded BaseDisplay Icons and Symbols on the Corded Base
Display Icons and Symbols on the Corded Base
The LCD screen on the corded base gives you information on the current
status of the phone.
Icon
IconIcon
Icon
Meaning
Meaning Meaning
Meaning
AN ON
AN ONAN ON
AN ON
Displays when the
answering machine is On.
AN OFF
AN OFFAN OFF
AN OFF
Displays when the
answering machine i
s Off.
Displays when the keypad is locked.
Displays when the microphone is muted.
Displays when the line is in use.
Flashes when there is an incoming call.
Flashe
s when you have
a
new voicemail message.
(This is a
caller display service and is not usually available from UK
network providers.)
Displays when you have new missed calls, or the call log is
being viewed.
Displays when the phonebook is accessed.
Displays when
the
base unit
ringer is turned off.
Displays when the
base un
it is in speaker
phone
mode.
16
Turns on when there are more digits after those being
displayed
Press
C
to view more digits on the right.
Turns on when there are more digits in front of those being
displayed.
Press
C
to view more digits on the left.
On steady
when
the
answering machine
is turned
on,
there
are no new messages and the answering machine is not full.
Flashes slowly when there are new answering machine
message(s).
Flashes quickly when the answering machine is full.
####
88
8888
88
Phonebook and Call Log record number indicator.
88: 88
88: 8888: 88
88: 88
88
8888
88
DDDD
/88
/88/88
/88
MMMM
T
ime/date
display.
The time is displayed in 24-hours format and the date in
DD/MM format.
17
4444 USING THE CORDED BAS
USING THE CORDED BASUSING THE CORDED BAS
USING THE CORDED BASEEEE
4.1
4.14.1
4.1 Set Date & Time
Set Date & TimeSet Date & Time
Set Date & Time using
usingusing
using the Corded Base
the Corded Basethe Corded Base
the Corded Base
If you subscribe to Caller Display, the time and date settings should be
updated automatically from the network when you receive a call. The
time and date can also be set from a cordless handset.
Using the cordless base, you can set the date in DD/MM
DD/MMDD/MM
DD/MM format and the
time in 24
2424
24----hours
hourshours
hours format.
1. In standby mode, press and hold C to enter date & time
settings.
• ---- ----:
: :
: ---- ----
---- ----
DDDD
/
/ /
/ ---- ----
MMMM
is displayed.
2. Enter the current time, followed by the date. If you make a mistake,
press
M to delete the last digit entered.
3. Press
C to confirm the date and time settings.
•
A confirmation tone is played and the corded base returns to
standby mode.
4.2
4.24.2
4.2 Make a call
Make a call Make a call
Make a call from
fromfrom
from the Corded
the Cordedthe Corded
the Corded Base
BaseBase
Base
4.2.1
4.2.14.2.1
4.2.1 Pre
PrePre
Pre----dialling
diallingdialling
dialling
1. In standby mode, enter the phone number (maximum 24 digits).
2. If you make a mistake, press M to delete the last digit entered.
3. Pick up the corded handset from the base unit or press to
S dial
the number in speakerphone mode.
4. When you complete the call, return the handset to the corded base
unit or press
S.
4.2.2
4.2.24.2.2
4.2.2 Direct dialling
Direct diallingDirect dialling
Direct dialling
1. Pick up the corded handset from the base unit or press S.
2. Listen for the dial tone and then enter the phone number.
3. When you complete the call, return the handset to the corded base
unit or press
S.
18
4.3
4.34.3
4.3 Adjust
Adjust Adjust
Adjust Earpiece or Speaker
Earpiece or Speaker Earpiece or Speaker
Earpiece or Speaker Volume on the Corded Base
Volume on the Corded BaseVolume on the Corded Base
Volume on the Corded Base
There are 5 volume levels. The default level is L3
L3L3
L3.
During a call, press +- to select from L1
L1L1
L1 to L5
L5L5
L5.
•
The current setting is shown.
•
When you end the call, the setting will remain at the last
selected level.
4.4
4.44.4
4.4 Set Ring
Set RingSet Ring
Set Ringer
erer
er Volume on the Corded Base
Volume on the Corded BaseVolume on the Corded Base
Volume on the Corded Base
You can set the ringer volume on the corded base from L0
L0L0
L0 (ringer off) to
L5
L5L5
L5. The default level is L3
L3L3
L3.
1. In standby mode, press
+- to select the desired setting
(each volume level will play as it is select).
Note:
Note:Note:
Note:
The corded base will ring at the selected volume level when it receives an
incoming call.
If you set ringer volume to L0
L0L0
L0, will appear on the display and the
corded base will not ring when it receives an incoming call.
4.5
4.54.5
4.5 Turn off Ring
Turn off RingTurn off Ring
Turn off Ringer
erer
er on the Corded Base
on the Corded Baseon the Corded Base
on the Corded Base
1. In standby mode, press and hold
#
to turn off the ringer.
•
is displayed.
2. To turn the ringer back on, press and hold
#
again.
4.6
4.64.6
4.6 Lock/Unlock t
Lock/Unlock tLock/Unlock t
Lock/Unlock the Keypad on the Corded Base
he Keypad on the Corded Basehe Keypad on the Corded Base
he Keypad on the Corded Base
1. In standby mode, press and hold
*
to lock the keypad.
2. To unlock the keypad, press and hold
*
again.
Note:
Note: Note:
Note: Incoming calls can still be answered and calls can still be made with
the corded handset, even if the keypad is locked.
4.7
4.74.7
4.7 Mu
MuMu
Mute/Unmute the Microphone
te/Unmute the Microphonete/Unmute the Microphone
te/Unmute the Microphone
1. During a call, press M to turn off the microphone.
•
is displayed.
2. To unmute the microphone, press M again.
19
4.8
4.84.8
4.8 Initiate an Intercom Call
Initiate an Intercom CallInitiate an Intercom Call
Initiate an Intercom Call from the Corded Base to a
from the Corded Base to a from the Corded Base to a
from the Corded Base to a Registered
Registered Registered
Registered Cordless
Cordless Cordless
Cordless
Handset
HandsetHandset
Handset
The system allows an intercom call between the corded base and a
registered cordless handset.
1. Pick up the corded handset from the corded base or press S.
2. Press
at the bottom of the corded base.
•
All registered cordless handsets will start to ring.
3. Press T on any handset to intercom with the corded base.
•
The paging tone on all handsets and the corded base will stop.
Note:
Note:Note:
Note:
1) You can cancel the intercom call before it is answered by pressing
at the bottom of the corded base.
2) If there is no answer from the cordless handset within one minute,
the paging will be cancelled automatically.
4.9
4.94.9
4.9 AAAAnswer an External Call
nswer an External Call nswer an External Call
nswer an External Call dddduring an Intercom Call
uring an Intercom Calluring an Intercom Call
uring an Intercom Call on the Corded Base
on the Corded Baseon the Corded Base
on the Corded Base
You will hear an alert tone when you receive an incoming external call
during an intercom call on your corded base, and you can choose from the
following options:
1) Replace the corded handset onto the corded base or press
S to
end the intercom call. The base will start ringing and you can answer
the incoming call like a normal call.
2) Press
at the bottom of the corded base to put the intercom call on
hold and answer the incoming call. Then you can press and hold
to
set up a conference call between all three parties, or you can end the
call on the corded handset, which will transfer the incoming call to the
other intercom handset.
20
4.10
4.104.10
4.10 Transfer an External Ca
Transfer an External CaTransfer an External Ca
Transfer an External Call
ll ll
ll from the Corded Base
from the Corded Base from the Corded Base
from the Corded Base to
to to
to aaaa Cordless
Cordless Cordless
Cordless Handset
HandsetHandset
Handset
1. During the call, press at the bottom of the corded base to put
the external call on hold.
•
Intercom ringing starts immediately with all registered cordless
handsets.
Note:
Note: Note:
Note: If there is no answer from the cordless handset, or you wish to
cancel the intercom call before it is answered, press
at the bottom of
the corded base to return to the external call.
2. Press
T on the cordless handset to answer the internal call, where
both internal callers can talk.
3. Return the corded handset to the corded base or press S to
transfer the external call to the cordless handset.
4.11
4.114.11
4.11 Initiate
Initiate Initiate
Initiate a Conference
a Conferencea Conference
a Conference Call
Call Call
Call dddduring a Call
uring a Calluring a Call
uring a Call on the Corded Base
on the Corded Baseon the Corded Base
on the Corded Base
You can establish a 3-way conference by inviting another cordless
handset to join in a conference call with you and the external caller.
1. During the call, press
at the bottom of the corded base to put
the external call on hold.
•
Intercom ringing starts immediately with all registered cordless
handsets.
Note:
Note: Note:
Note: If there is no answer from the cordless handset, or you wish to
cancel the intercom call before it is answered, press
at the bottom of
the corded base to return to the external call.
2. Press T on the cordless handset to answer the internal call, where
both internal callers can talk.
3. When the intercom call is connected, press and hold
at the
bottom of the corded base for 2 - 3 seconds to connect the call in
conference mode.
21
4.12
4.124.12
4.12 Call from the Redial List on the C
Call from the Redial List on the CCall from the Redial List on the C
Call from the Redial List on the Corded Base
orded Baseorded Base
orded Base
The corded base stores only the last number dialled from the base.
1. In standby mode, press
R
on the corded base.
•
The last number dialled is displayed.
2. Press S or lift up the handset from the corded base.
•
The number will be dialled out automatically.
4.13
4.134.13
4.13 Store a pre
Store a preStore a pre
Store a pre----dial number to
dial number to dial number to
dial number to the Phone
the Phonethe Phone
the Phonebook on
book on book on
book on the C
the Cthe C
the Corded Base
orded Baseorded Base
orded Base
1. In standby mode, enter the pre-dial number.
2. Press and hold P.
•
The pre-dial number is displayed.
3. Press C to save the pre-dial number into the phonebook.
•
A confirmation tone is played and the corded base returns to
standby mode.
4.14
4.144.14
4.14 Store a number from
Store a number from Store a number from
Store a number from the Redial L
the Redial Lthe Redial L
the Redial List to
ist to ist to
ist to the P
the Pthe P
the Phone
honehone
honebook on
book onbook on
book on the C
the Cthe C
the Corded Base
orded Baseorded Base
orded Base
1. In standby mode, press
R on the corded base.
•
The last number dialled is displayed.
2. Press and hold P.
•
The redial number remains on the screen, but with a flashing
cursor at the end.
•
To modify the redial number, press
+-
to move the
cursor and use
M
to delete digits.
3. Press C to save the redial number into the phonebook.
•
A confirmation tone is played and the corded base returns to
standby mode.
22
4.15
4.154.15
4.15 Access the Phonebook on the Corded Base
Access the Phonebook on the Corded BaseAccess the Phonebook on the Corded Base
Access the Phonebook on the Corded Base
The corded base can store up to 30 phonebook entries. Each phonebook
entry can have a maximum of 24 digits for the phone number, but you
cannot store the names of your contacts on the phonebook. Entries are
stored in the next free location, with the number of the location being
shown at the top right of the screen when viewing the phonebook list.
1. In standby mode, press P to view the first record on the
phonebook.
2. Press +- to scroll through the list of entries in the
phonebook.
• #01
#01#01
#01
to
#30
#30#30
#30
is displayed on the top right of the LCD to indicate
the record number, where
#01
#01#01
#01
represents the first record in the
phonebook.
•
If you know the location of a number, you can enter digits to go
straight to the number instead of scrolling through using
+-
.
Note:
Note:Note:
Note:
If the phone number has more than 14 digits, press C to view
additional digits.
Phonebook entries are stored in the next free location.
4.16
4.164.16
4.16 Store a Number
Store a Number Store a Number
Store a Number to
toto
to the Phonebook
the Phonebookthe Phonebook
the Phonebook on the Corded Base
on the Corded Baseon the Corded Base
on the Corded Base
1. In standby mode, press and hold P.
2. Enter the telephone number. If you make a mistake, press
M
to delete the last digit entered.
3. Press
C to confirm.
•
A confirmation tone is played and the corded base returns to
standby mode.
Loading...