Page 1
Page 1
Delete button
New Call LED
USER GUIDE
Check button
To review the dailled numbers
and the conversation time.
Function button
To move forward / backward for selecting
functions, to adjust and confirm time.
D33
Model 0433
Display Screen
Enter button
To select
individual
function
Program/esc
button
To enter / exit
the menu
Ringer LED
Recall button
Call back/
Pause/LNR
button
To call back,
pause or redial
last number
dialled
SECRECY button
Store
button
■ Binatone Help Line: 01325 304473, 9.00 am to 5.00 pm, Monday to Friday.
D33 User Guide-June03 6/13/2003, 3:06 PMPage 1 Adobe PageMaker 6.5C/PPC
Speakerphone
button
Press this to mute the mouth-piece
during a call so the person on the
other end cannot hear you.
Page 2
Page 2
OPERATION
BASIC FUNCTION
THE DISPLAY
On-Hook Status:
Current time
Number of
New Calls
Current date Current year
Off-Hook symbol
This appears when you
pick up the handset/
speakerphone
Total of calls
0
Dialling numbers
8
Call timer
Installing (or Replacing) the Battery
Use screwdriver to remove the screw in the battery compartment cover on the bottom of the base unit.
IMPORTANT — before removing the battery compartment cover, always make sure the base unit
is disconnected from the telephone line.
❉ Install 3 Alkaline AAA batteries into the battery compartment and re-fit the cover before use.
Warning : The unit will not work without batteries fitted.
Battery compartment
cover
3 R03/AAA Alkaline batteries
Connection and conditions for use
You can connect your D33, to public networks in the UK; or to an approved PBX using DTMF signalling.
Each item of telephone equipment (phones, fax machines, etc.) has a ringer equivalence numbers
(REN). The RENs of all equipment connected to an exchange line must not add up to more than 4
otherwise, one or more phones may not ring and/or answer calls correctly.
D33 has a REN of 1, and most other telephones have a REN of 1 unless marked otherwise.
Note :
Subscription to the Caller ID Service is required for the phone to display the callers number.
Please contact your line Provider. If you do not subscribe to Caller ID, the Caller Display will not
work but the phone will work.
■ Binatone Help Line: 01325 304473, 9.00 am to 5.00 pm, Monday to Friday.
D33 User Guide-June03 6/13/2003, 3:06 PMPage 2 Adobe PageMaker 6.5C/PPC
Page 3
Page 3
MAKING AND ANSWERING CALLS
To make a call
1 Lift the handset or press
SPEAKERPHONE
and wait for Dial tone
2 Dial the telephone number using the keypad
LAST NUMBER REDIAL
1 Lift up the handset or press
2 Press the LNR button
SPEAKERPHONE
CALL BACK / PAUSE
to get a dial tone
SECRECY
While you are on a call, to mute the mouthpiece so that your voice cannot be heard.
1 Press and hold
SECRECY
USE ON A PBX
If you are using your D33 on a PBX, and the PBX User Gulde tells you to press RECALL, press the
Recall
on your D33.
When making calls on some PBXS, you need to wait for a second Dial tone after dialling the outside line
access digit (e.g.”9”). If your PBX is of this type, you can use the “Pause function” when making calls, so
that last Number Redial will work later.
TO MAKE A LNR CALL ON A PBX :
1. Key in the outside line access digit then press
2. Dial the telephone number.
3. Now you can redial (Lift handset & Press
CALL BACK / PAUSE
CALL BACK / PAUSE
) and the phone will dial 9, Pause and then dial
the number.
PHONE BOOK
❉ Phone book can store 20 numbers (up to 16 digits) and 20 names (up to 16 characters).
ADD NUMBER AND NAME TO THE PHONE BOOK
1. Press
2. Press or to go to the last entry
3. Press
STORE
ENTER
4. LCD will display a flashing ‘_’
5. Input the number
6. Press
ENTER
to confirm
7. LCD will display a flashing ‘_’ under the number
8. Input the name through numerical button with letters
9. Press
■ Binatone Help Line: 01325 304473, 9.00 am to 5.00 pm, Monday to Friday.
D33 User Guide-June03 6/13/2003, 3:06 PMPage 3 Adobe PageMaker 6.5C/PPC
ENTER
to confirm
Page 4
Page 4
DELETE NUMBER AND NAME FROM THE PHONE BOOK
1. Press
2. Press or to find the number you want to delete
3. Press
STORE
DELETE
for 1 second
4. LCD will display ‘-EMPTY-’ when there is no number
MODIFY NUMBER AND NAME FROM THE PHONE BOOK
1. Press
2. Press or to find the number and name you want to modify
3. Press
4. The last digit of the number will be flashing
5. Press to modify the flashing number or press
6. Press
7. The last letter of the name will be flashing
8. Press
9. Press
STORE
ENTER
key you wish to add
ENTER
to confirm
DELETE
to delete the flashing letter or press the keypad digit for the letter you wish to add
ENTER
to confirm
DELETE
to delete flashing number or press the number
DIALLING FROM PHONE BOOK
1. Under On-Hook status, press
STORE
, the phone book reviewing status has been entered
2. Press or to find the number you want to dial out. The LCD will display the number and name
3. Press
CALL BACK / PAUSE
and the number will be dialled
COPY NUMBER FROM CALL LOG TO THE PHONE BOOK
1. Press or to select the number you wish to copy to the phonebook
2. Press
STORE
3. LCD will display “COPY TO ?”
4. Press “0 - 9” to store the number to the memory
You must contact your line provider and subscribe to Caller Display with them before the Caller ID
function on this phone will work.
■ Binatone Help Line: 01325 304473, 9.00 am to 5.00 pm, Monday to Friday.
D33 User Guide-June03 6/13/2003, 3:06 PMPage 4 Adobe PageMaker 6.5C/PPC
Page 5
Page 5
OUTGOING CALLS LOG
REVIEW DIALLED NUMBERS
1. Under On-Hook status
2. Press
3. Press or to review the dialled numbers and the conversation time
4. LCD will display ‘-EMPTY-’ when there is no number in the memory
Remark: No.1 is the last number dialled out and No.30 is the oldest number dialled out.
CHECK
TO DELETE OUTGOING CALL
1. Press
CHECK
2. Press or to find the number you want to delete
3. Press
DELETE
for 1 second
CALL
#01
3
1
1
4. LCD will display ‘-EMPTY-’ when there is no number
TO DIAL FROM OUTGOING CALL LOG
1. Press
2. Press
3. Press
CHECK
and use the or to select dialled number
CALL BACK / PAUSE
CALL BACK / PAUSE
, the number will be dialled.
again if the dialling is not successful
COPY A DIALLED NUMBER TO PHONE BOOK
1. Press
2. Press
CHECK
and select number you want to copy by pressing or key
STORE
3. LCD will display “COPY TO ?”
4. Press 0-9 to store the number to the memory
1. Display Shows 8888888888888888:
The display contrast is set too high and you can no longer see the Menu selections on the display. Please
follow these key presses. - Press and release the
button. - Press and release the
ENTER
button - Press and release the arrow button until the desired
ENTER
contrast is displayed and then press and release the
button twice - Press and release the
ENTER
button.
PGM/ESC
2. Display Is Blank:
The display contrast may be set too low so that you can no longer see the menu selections in the display.
ENTER
ENTER
button twice - Press and release the
button.
Please follow these key presses. - Press and release the
button. - Press and release the
ENTER
button - Press and release the arrow button until the desired
contrast is displayed and then press and release the
■ Binatone Help Line: 01325 304473, 9.00 am to 5.00 pm, Monday to Friday.
D33 User Guide-June03 6/13/2003, 3:06 PMPage 5 Adobe PageMaker 6.5C/PPC
PGM/ESC
Page 6
Page 6
CLI LOG (INCOMING CALLS LOG)
This phone can store up to 199 incoming numbers with time which can be reviewed, restored to Phone
book and dialled out.
REVIEWING INCOMING CALLS
1. Under On-Hook status
2. Press or , enter into reviewing status
3. LCD will display ‘-NO CALL-’ when there is no message
4. When reviewing to the first or last number, the LCD will display ‘-END OF LIST-’‘
END OF LISTS
DELETING NUMBER FROM CALLER ID LOG
1. Select number by pressing or key
2. Press and hold
number and the total of calls will decrease
3. Press and hold
DELETE
for 1 second, the number will be deleted. The LCD display will show the next
DELETE
for 3 seconds, all the numbers will be deleted
DIALLING FROM CALLER ID LOG
1. Press or to find the entry you want to dial.
2. Press
CALL BACK / PAUSE
3. If the dialling is not successful, press
ENTER
or
, and the number will be dialled.
CALL BACK / PAUSE
to try again
MEMORY FULL
When the called ID log is full, the next incoming number will overwrite the most recent incoming number.
The LCD display will display “-MEMORY FULL-” until you delete the numbers in the caller ID log.
LOW BATTERY INDICATOR FUNCTION
When the battery is low, the LCD will display the low battery symbol.
■ Binatone Help Line: 01325 304473, 9.00 am to 5.00 pm, Monday to Friday.
D33 User Guide-June03 6/13/2003, 3:06 PMPage 6 Adobe PageMaker 6.5C/PPC
Page 7
Page 7
SYSTEM MENU
1. Under On-Hook status
2. Press
3. Press
PGM/ESC
to enter into the menu
or to select one of the functions below that you wish to change and then press
ENTER
SET LCD CONTRAST
1. Press or to adjust the LCD contrast from 1 to 8
2. Press
PGM/ESC
ENTER
or
to set and exit menu
Please note, if the display is faint, try adjusting the contrast as explained above.
SET OFF TIME - To limit Call Duration
1. Press to set off time from 00 minute to 99 minutes
2. If you use this function we suggest you set it to more than 5 minutes. “Emergency calls are also
affected by this function.”
3. Press
PGM/ESC
or
ENTER
to set exit menu
SET DATE AND TIME
1. Press to modify the flashing number
2. Press to change the flashing digit
3. Press
PGM/ESC
ENTER
or
to set and exit menu
SET AREA CODE
Set this to your local area code. When you receive a local call, your Caller ID will log the full number
including the area code. When phoning back from the Caller ID log, the local area code will not be
dialled.
1. Input the area code
2. Press
ENTER
.
LONG PREFIX
Not used.
BROWSE DIALLED NUMBERS
Allows you to view and dial previously dialled numbers.
1. Press or key to select the “number”
2. Press or key to browse the number and press
ENTER
which ever dialling out and press
DELETE
key can delete the number
SET DISPLAY LANGUAGE
1. Press to choose the language of LCD among English, Netherlands, Deutsch, Francais, Svenska,
Espanol, Italiand or Danish
2. Press
■ Binatone Help Line: 01325 304473, 9.00 am to 5.00 pm, Monday to Friday.
D33 User Guide-June03 6/13/2003, 3:06 PMPage 7 Adobe PageMaker 6.5C/PPC
PGM/ESC
ENTER
or
to set and exit menu
Page 8
Page 8
Page 9
Guarantee and
While the unit is
under Guarantee
Repair after
the Guarantee
has expired
■
While the unit is under Guarantee
The Binatone D33 is guaranteed for 12 months from the date of purchase shown on your sales
receipt. The Guarantee does not cover damage by misuse or negligence, or by excessive voltages –
service
for example, faults on the telephone line, or lighting.
Please keep your sales (till) receipt – this is your guarantee. You should also keep the original
packaging material.
This does not affect your statutory rights.
In the unlikely event that you need to return your D33 to our Repair Centre while it is under guarantee,
there will be a £5 handling charge.
1. Disconnect the base unit from the telephone line.
2. Pack up all parts of your D33, using the original packaging. Remember to include the mains
adapter.
3. Return the unit to the shop where you bought it, making sure you take your sales receipt.
If the unit is no longer under Guarantee, first follow steps 1 and 2 as for repair under Guarantee.
Then...
4. Call our Service Department on 01325 304473 and ask for a quotation of the repair charge and
details of where to send your D33 for repair
5. Make sure you include with your D33:
• your name and address
• a cheque or postal order for the value of the repair charge
6. Return your D33 to the address given by the Service Department.
EC DECLARATION OF CONFORMITY
We: Binatone Telecom Plc
Unit 1, Ponders End Industrial Estate
East Duck Lees Lane
Enfield, Middlesex
EN3 7SP, United Kingdom
Declare under our sole responsibility that the following product(s):
Kind of Product: Telephone with Caller Display Facility
Type Designation: D33
is (are) in conformity ith the following relevant harmonised standards:
EN 55022 : 1998 EN 55024: 1998 EN60950 CTR38 iCTR37
following the provisions of Council Directive 1999/5/EC on radio equipment and the mutual
recognition of their conformity.
BTP Ver 2, June. 03
■ Binatone Help Line: 01325 304473, 9.00 am to 5.00 pm, Monday to Friday.
D33 User Guide-June03 6/13/2003, 3:06 PMPage 9 Adobe PageMaker 6.5C/PPC
Loading...