Billion BiPAC 7300VGP, BiPAC 7300VP Quick Start Guide

BiPAC 7300VP/ 7300VGP

VoIP/(802.1 1g) ADSL2+ Router

Quick Start Guide

Billion BiPAC 7300VGP Series ADSL2+ Router

A

For more detailed instructions on configuring and using
the VoIP/802.11g ADSL2+ Router, please refer to the
on-line manual.

Package Contents

VoIP/(802.11g) ADSL2+ Router
CD-ROM containing the on-line manual
RJ-11 ADSL/telephone Cable
Ethernet (CAT-5 LAN) Cable
AC-DC power adapter (12VDC, 1.2A)
This Quick Start Guide

Warning

ttention

 Do not use the BiPAC 7300VGP Series in high humidity or high

temperatures.

 Do not use the same power source for the BiPAC 7300VGP

Series as other equipment.

 Do not open or repair the case yourself. If the BiPAC 7300VGP

Series are too hot, turn off the power immediately and have it
repaired at a qualified service center.

 Avoid using this product and all accessories outdoors.

 Place the BiPAC 7300VGP Series on a stable surface.
 Only use the power adapter that comes with the package. Using

a different voltage rating power adaptor may damage the router.

1

Quick Start Guide

The Front LEDs

LED Description

1 PWR： Lights when the power is ON.
2 SYS： Lights when the system is ready.

Steady glow when connected to an Ethernet device.
Glows green for 100Mbps; Orange for 10Mbps.
Blinking light when data is Transmitted / Received.

Lit green when the wireless connection is established.
Flashes when sending/receiving data.

3-6

7

LAN Port
1-4：

WLAN：

(7300VGP
only)

8-9 Phone： Lit green when the phone is off-hook.

10 LINE：

Lit when the inbound and outbound calls transmitted

through PSTN.

11 VoIP： Lit when SIP registration is OK.
12 PPP： Steady glow when there is a PPPoA / PPPoE connection.

13 ADSL：

Lights when successfully connected to an ADSL DSLAM

(linesync).

2