Billion BiPAC 710C2, BiPAC 711C2 User Manual

BIPAC-711C2 / 710C2

ADSL Modem / Router

Quick Start Guide

Billion BIPAC – 711C2 / 710C2 – ADSL Modem / Router

A

For more detailed instructions on configuring and using
the ADSL Modem/Router, please refer to the on-line
manual.

Package Contents

BIPAC-711C2 / 710C2 ADSL Router
CD-ROM containing the online manual
RJ-11 ADSL/telephone Cable
Ethernet (CAT-5 LAN) Cable
One USB cable (for 711C2 only)
AC-DC power adapter (12VDC, 1A)
This Quick Start Guide

 Do not use the BIPAC-711C2 / 710C2 in high humidity or high

Warning

 Place the BIPAC-711C2 / 710C2 on a stable surface.
 Only use the power adapter that comes with the package. Using

ttention

temperatures.

 Do not use the same power source for the BIPAC-711C2 / 710C2

as other equipment.

 Do not open or repair the case yourself. If the BIPAC-711C2 /

710C2 is too hot, turn off the power immediately and have it
repaired at a qualified service center.

a different voltage rating power adaptor may damage the router.

1

Quick Start Guide

The Front LEDs

5 3 1

7 4 2

LED Meaning

1 PWR Lit green when power adapter is connected.

2 SYS

3 USB

4 LNK Lit green when the LAN link is connected.

5 COL

7 ADSL

When lit, it indicates that the device is working properly.

When this LED is lit, it indicates that the USB port is connected to
the PC and working properly.

Flashes green when collision happens
When lit, it indicates that the ADSL (Line) port is connected to the

DSLAM and working properly.

The difference between BIPAC-711C2 and 710C2 is that BIPAC-710C2
does not have USB port; the rest functions are the same as BIPAC­711C2.

2

Billion BIPAC – 711C2 / 710C2 – ADSL Modem / Router

The Rear Ports

6 4 3 1

5 2

Port Meaning

1

2

3

4 RESET

5

6

Power Switch

PWR

LAN

(RJ-45 connector)

USB

(USB connector)

LINE

(RJ-11 connector)

Power ON/OFF switch

Connect the supplied power adapter to this jack.

Connect the supplied crossover cable to this port when
connecting to a NIC (Network Interface card) in PC.
Connect an UTP Ethernet cable to this port when connecting to a
LAN such as an office or home network.

Press it to restore the factory default setting back

Connect the supplied USB cable to this port when connecting to
the PC

Connect the supplied RJ-11 cable to this port when connecting to
the ADSL

BIPAC-710C2 does not have USB port.

3