Page 1
V SERIES
Owner’s Guide
Compact
Stage Monitors
MX8
MX10
Page 2
PRODUCT DESCRIPTION
MX
The V SERIES MX8 and MX10 stage monitors are designed to be aordable, yet
highly eective for a wide range of demanding applications such as houses of
worship, scholastic and corporate auditoriums, nightclubs, and numerous other
venues that require clarity of speech, musicality, and high power output. The
MX8 and MX10 feature a low profile design that does not visually dominate the
stage. Both models utilize advanced co-axial drivers to provide true pointsource acoustical output—a highly desirable characteristic for loudspeakers
that are used in close proximity to microphones.
The LF and HF sections utilize separate magnetic structures for maximum
eciency and freedom from intermodulation distortion. The low frequency
cones employ Community’s patented Carbon Ring Cone Technology™ which
increases the eective area of the cone, while mechanically reinforcing the
critical juncture between the cone and the surround for greater durability and
longer life span.
The MX8 and MX10 feature exceptionally high sensitivity, permitting the use of
smaller power amplifiers to obtain very high output levels. Precision engineered
internal crossovers eliminate the need for bi-amplification, further reducing the
overall system cost. Characterized by a smooth, flat frequency response
coupled with low distortion, both models provide exceptional resistance to
feedback. The Tru-Phase™ high frequency waveguide aords precision pattern
control to avoid acoustic hot spots on the stage, thereby greatly simplifying the
task of the personnel who mix monitors. Community’s Uniform Voicing
Technology ensures that the two models are virtually interchangeable with one
another, though greater acoustic output and extended low frequency
reproduction can be expected from the larger MX10.
Compact, lightweight, attractive, and durable, the MX8 and MX10 are
exceptional stage monitors available in black or white finishes. A single rear
Ergo-Grip™ handle oers convenience for portable applications.
Optional yoke mounting brackets for flush mounting an MX8 or MX10 monitor
tightly against a wall or ceiling are sold separately (part no. MX-Y8 and
MX-Y10). Corner mounting is also possible when the yoke is mounted vertically
and the loudspeaker horizontally with the bottom and rear of the enclosure
against adjacent walls, further aided by the convenient location of the input
panel on the bottom rear of the loudspeaker enclosure. The brackets are also
available in black or white finishes to match the loudspeaker color.
The V SERIES MX8 and MX10 stage monitors are the perfect complement to any
of Community’s Front of House systems including the ENTASYS column linearray, powerful I SERIES product lines, and the rest of the versatile V SERIES
line.
MX10
SHIPPING DAMAGE
If the product is damaged during
transit you must file a damage
claim directly with the freight
company. Be sure to save the
carton and packing materials, as
damage claims can be denied if
these materials are not retained.
If evidence of physical damage
exists upon arrival, be cautious
before signing a delivery
acceptance receipt. Often, the
fine print will waive your right to
file a claim for damage or loss
after you sign it. Make sure that
the number of cartons shown on
the freight documents have
actually been delivered.
PACKING LIST
Rear image showing input panel
and Ergo-Grip™ handle.
(1) MX8 or MX10
Stage Monitor
(1) Warranty Card
(1) Owner’s Guide
MX8 and MX10 Owner’s Guide — Page 2
Page 3
INSTALLATION
MX stage monitors can be placed on a stage or floor, or can be permanently mounted to a surface using the
appropriate yoke (MX-Y8 or MX-Y10). Instructions for yoke attachment are included with the yokes.
Wired / cable connections can be made to the input panel using the terminal block or NL4-type connectors.
IMPORTANT SAFETY INFORMATION
Modern professional power amplifiers are capable of delivering lethal voltages. Installation and service
personnel must be cautious to ensure that all amplifiers are disconnected from the AC Mains supply whenever
such personnel might potentially come in contact with un-insulated wiring.
When installing the bracket and loudspeaker, or otherwise suspending the loudspeaker by any other means, it is
essential to adhere to safe rigging and construction practices. Installation of loudspeakers should only be
performed by trained and qualified personnel and it is strongly recommended that a licensed and certified
professional structural engineer approve the mounting design.
MX8/MX10 LOUDSPEAKER SPECIFICATIONS*
MODEL MX8 MX10
Loudspeaker Type:
Operating Range:
Max Input Ratings:
Sensitivity 1W/1m:
Maximum Output:
Nominal Impedance:
Nominal –6dB Beamwidth:
Input Connection:
Handles:
Required Accessory:
Optional Accessory:
Dimensions—Height:
Width (front):
Depth:
Weight:
Shipping Weight:
*Community strives to improve its products on a continual basis. Specifications may therefore be subject to change without notice.
Two-way, full-range 8-inch coaxial
floor monitor, passive crossover
80 Hz to 18 kHz
90 Hz to 16 kHz (+/-3dB)
150W continuous / 375W program 200W continuous / 500W program
96.4 dB SPL
(125 Hz to 12.5 kHz, 1/3 octave)
117 dB SPL 122 dB SPL
8 ohms 8 ohms
115° Conical 100° Conical
(2) Paralleled NL4-type connectors
(pins 1+ & 1-) internally looped to
(1) two terminal barrier strip
(1) Ergo-Grip™ rear pocket handle (1) Ergo-Grip™ rear pocket handle
24 dB/Octave 100 Hz high pass filter 24dB/Octave 90 Hz high pass filter
MX-Y8 Yoke mounting wall bracket MX-Y10 Yoke mounting wall bracket
10.4 inches (263 mm)
10.8 inches (275 mm)
14.5 inches (367 mm)
17 lbs (8 kg) 22 lbs (10 kg)
23 lbs (11 kg) 29 lbs (14 kg)
Two-way, full-range 10-inch coaxial
floor monitor, passive crossover
70 Hz to 18 kHz
90 Hz to 16 kHz (+/-4dB)
99 dB SPL
(125 Hz to 12.5 kHz. 1/3 octave)
(2) Paralleled NL4-type connectors
(pins 1+ & 1-) internally looped to
(1) two terminal barrier strip
10.8 inches (275 mm)
12.6 inches (321 mm)
16.5 inches (419 mm)
MX8 and MX10 Owner’s Guide — Page 3
Page 4
TRANSFERABLE WARRANTY “(LIMITED)”
(VALID IN THE USA ONLY}
The V SERIES MX8 and MX10 loudspeaker systems are designed and backed by Community Professional
Loudspeakers. For complete warranty information within the USA please refer to the warranty card enclosed
with the product or the website (www.communitypro.com/warranty-statement). Please call 610-876-3400 to
locate your nearest Authorized Field Service Station.
For Factory Service call 610-876-3400. You must obtain a Return Authorization (R/A) number prior to the
return of your product for factory service.
WARRANTY INFORMATION AND SERVICE FOR COUNTRIES
OTHER THAN THE USA
To obtain specific warranty information and available service locations for countries other than the United
States of America, contact the authorized Community Distributor for your specific country or region.
FIND THE LATEST ONLINE
The latest version of the manual and the most recent product information is available at
www.communitypro.com
Community Professional Loudspeakers
333 East Fifth Street
Chester, PA 19013-4511 USA
TEL: 1-(610) 876-3400 FAX: 1-(610) 874-0190
www.communitypro.com
© 2018 All Rights Reserved
MX8 and MX10 Owner’s Guide — Page 4
25MAY2018
Loading...