MANUAL
MASK SERIES
INFO@APART-AUDIO.COM
MASK SERIES
APART THANKS YOU
Apart thanks you for purchasing the MASK 8.
Read this manual carefully to get the best result out of your music system.
MASK two way loudspeakers have been designed to fi t in any interior and to be applicable in
most situations.
The MASK supports shipped along, are a great tool for easy reliable installation and orientation.
Each model has a unique protection circuit, which will only appear in the audio path when
We’re sure your MASK8F loudspeakers will give the finishing touch to your sound system.
We’re sure your MASK 8 loudspeakers will give the fi nishing touch to your sound system.
needed.
F.
Features
• MDF wooden cabinet
• Available in black or white
• Paintable
• 2 L-brackets for safe and reliable mounting
• Wall and ceiling mountable
• 8 rigging points, M8
• Unique overload protection
• Protective steel grill
• Dome tweeter on 360° Waveguide horn for broad dispersion
• 8 Ω, 8” coated paper cone HD woofer
• Two speakon 4 connectors
• Great power handling
• Smooth professional HiFi sound
wide dispersion waveguide horn for broad dispersion
2
WWW.APART-AUDIO.COM
MASK SERIES
MASK8BL
MASK8F
MASK8 Series
The MASK8F is a full range loudspeaker fitted with an 8” LF driver and a smooth-sounding
The senior MASK is a full range loudspeaker fi tted with an 8” LF driver and our smooth
ferro-fluid cooled silk dome tweeter on a wide dispersion waveguide horn for high output.
sounding ferro-fl uid cooled silk dome tweeter on a 360° Waveguide horn for high output,
The coated paper cone combined with the stiff suspension results in a well-controlled
without getting aggressive.
sound.
The coated paper cone together with the stiff suspension results in a well controlled sound.
Use MASK8F anywhere you need big sound from a small enclosure.
This wooden bass refl ex loaded model is only in 8Ω available.
You can use the MASK 8 anywhere you need a BIG sound from a rather small enclosure.
MASK8F-BL MASK8F-W
MASK8BL
Subwoofers
To improve reproduction of lower frequencies, it is advisable to add (powered) sub-
woofers to your sound system.
To calculate the number of subwoofers needed, determine the maximum rated output
of a single subwoofer. Placing your subwoofer near one or more boundaries, increases
the SPL by 3-6dB for each boundary (for certain frequencies).
MASK8W
3
WWW.APART-AUDIO.COM
SUB2400
SUB2200 SUB-A165
MASK SERIES
Mounting
For safe mounting eight 8mm rigging points are available; one at the top and bottom, two at
each side and two at the back.
Two strong L brackets are shipped along for easy mounting to a wall or ceiling.
Fix the brackets to the wall or ceiling (1), put the M8 screw in the M treat at the top and the
bottom (2), and just hook your MASK into the brackets (3).
The sleeve in the brackets helps you to hook up your MASK in a easy and safe way.
Then fasten the M8 screws to secure.
This mounting system can be used for vertical, horizontal or ceiling mounting.
If safety rules allow, it is possible to mount the MASK8 vertically with one bracket only fi g.A
However in that case we strongly recomend to use a extra safety cable.
(2) M8 Screw
(2) M8 Screw
(1) Fix the brackets to the wall
4
WWW.APART-AUDIO.COM
(3) Hook into the brackets
Fig. A
MASK SERIES
Connecting the speakers
Safety Instructions
1. Keep this manual for future reference.
2. Clean only with dry cloth.
3. Do not operate near heaters or place it on other apparatus which produce a lot of heat.
4. Take care for the speaker leads. Never use damaged leads and install them in such
a way that no one can walk on it.
5. Only use accessories specifi ed by the manufacturer.
6. Make sure the mounting surface can easily support the speaker’s weight.
7. Use only industry-accepted rigging tools and methods.
8. Choose the right speaker for the right job.
9. Use suffi cient loudspeakers and avoid death spots.
10. No main power shall be connected to the loudspeakers.
11. This apparatus should only be serviced by qualifi ed personnel. If not, the warranty might be void.
12. Removal of the grill causes risk to loudspeaker damage.
13. Use cables of the right gauge, certainly for long runs.
14. Use cables with clear colour codes and maintain polarity throughout the whole system.
15. Switch amplifi ers on with the volumes turned down completely to avoid loud clicks and clacks.
16. Avoid loud feedback for this is a main speaker killer!
17. Please check the unit’s condition after unpacking. If the outside of the carton box has been damaged, inform
your shipper immediately.
Music colours our life but too much sound might damage yours and others hearing permanently!
Wiring
Being exposed to loud sound levels over a long time can cause severe hearing loss. Don’t forget to
consult the local law regulations regarding producing sound in public places. In some countries ear
Two parallel wired speakon 4 connectors are available (wired +1/-1).
protection is obliged when the continuous sound level over 8 hours time is 80dB (A). Each halving of
To avoid confusion, use cables which have clear (colour) codes, so correct polarity can be
time allows an increase of 3dB.
maintained. Also use wires of the right gauge, certainly for longer distances.
Too week amplifi ers can burn your speakers
By pushing your amplifi er or its inputs too much, your amp can produce more power than the power
published in his manual.
This power is not always clean and can be very distorted. When such signal is fed into your loud-
speakers for a longer period, damage can be the result. Don’t cut in the budget of your amplifi er. A
loudspeaker can demand to ten times the average power to reproduce those smashing sonic bursts
you are kicking on. If your amplifi er has enough reserve power, your sound will remain clear. When
you squeeze your amp’s throat, he’ll be pushed to produce sounds which will kill your tweeters fi rst.
Protection systems are not built to be activated all the time, they are there to warn you and to
give you a safe margin!
Wiring
Two parallel wired speakon 4 connectors are available (wired +1/-1).
To avoid confusion, use cables which have clear (colour) codes, so correct polarity can be
maintained. Also use wires of the right gauge, certainly for longer distances.
Load 2,5mm² 4mm²
2 Ω <7.5m <12,5m
4 Ω <15m <25m
8 Ω <30m <50m
16 Ω <60m <100m
equity between loss and cable length
As long as you stay under these cable
lengths the loss of amplifi er power
will remain below +/- 10%.
INFO@APART-AUDIO.COM
5
MASK SERIES
Overload Protection
All MASK models have a unique overload protection, which only comes into the signal
path when needed. When too much power is fed into your MASK, fi rst a red led will
blink. When you neglect this warning, the overload protection will disconnect the signal
going to the loudspeakers and the red led will remain on. Turn down the level and after
about 5 seconds cooling down your favourite music will be heard again. When you
don’t want to work on your client’s nerves, don’t activate the overload protection !
Protection LED
Safety information
Important Safety Instructions
Before pushing your loudspeaker volumes to the edge, take a few minutes to read
these instructions carefully. This little time might avoid claims afterwards.
1. Keep this manual for future reference.
2. Clean only with dry cloth.
3. Do not operate near heaters or place it on other apparatus which produce a lot of heat.
4. Take care for the speaker leads. Never use damaged leads and install them in
such a way that no one can walk on it.
5. Only use accessories specifi ed by the manufacturer.
6. Make sure the mounting surface can easily support the speaker’s weight.
7. Use only industry-accepted rigging tools and methods.
8. Choose the right speaker for the right job.
9. Use suffi cient loudspeakers and avoid death spots.
10. No main power shall be connected to the loudspeakers.
11. This apparatus should only be serviced by qualifi ed personnel.
If not, the warranty might be void.
12. Removal of the grill causes risk to loudspeaker damage.
13. Use cables of the right gauge, certainly for long runs.
14. Use cables with clear colour codes and maintain polarity throughout the whole system.
15. Switch amplifi ers on with the volumes turned completely down to avoid loud clicks and clacks.
16. Avoid loud feedback for this is a main speaker killer!
17. Please check the units’ condition after unpacking. If the outside of the carton
box has been damaged, inform your shipper immediately.
6
INFO@APART-AUDIO.COM
Loading...