Beverage Air SPED48-12M-2 User Manual
Item No.
Quantity
3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax# 1-336-245-6453
http://www.Beverage-Air.com
Commercial Refrigeration Equipment
General Specification
3 Year Parts/Labor Warranty
Additional 2 Year Compressor Warranty
SPED48 ELITE SERIES — MEGA TOP
WITH DRAWERS
Fifty percent greater pan capacity than the all-around standard prep table. Features enhanced refrigeration system. Improved airflow for less temperature
gradient and uniform temperature distribution throughout the cabinet. Pans are
cooled from the bottom, eliminating the nece ssity of air blanke t. Airflow assures
that product in open containers is kept below 41°F and above freezing. This
translates into increased product shelf life, higher quality food, better food appearance, fresher product and a reduction of bacteria build-up to combat foodborne illnesses.
CABINET CONSTRUCTION
Exterior construction includes heavy-duty stainless steel finish on front, sides,
top, drawers and grille. Removable hoods and insulated lid assemblies are made
of matching stainless steel. Cabinet back and bottom are constructed of galvanized steel. Interior liner is made of aluminum for superior resistance to corrosion.
In cabinets with doors and drawers, doors are mounted to face of cabinet on
cartridge-style hinges permitting them to self close under their own weight. Hinges also allow doors to stay open 120° and permit easy door removal for service
and cleaning if required. A plug-in type vinyl magnetic gasket is attached to
each door for positive seal.
Drawer frames are constructed of heavy-duty stainless steel and are supported
on heavy-duty telescoping drawer slides for maximum support of stored food
products. Slides have locking mechanism to prevent from drawers being pulled
off of cabinets. Upper pull-out drawers accommodate 4” deep pans. Lower pullout drawers accommodate up to 6” deep pans. Heavy-duty pan divider supports
are supplied. Foodservice pans for drawers are not included. Snap-type vinyl
magnetic gasket is attached to each drawer for positive seal. Top drawer extends 17 3/4” (when opened) and bottom drawer extends 15 3/4” (when opened).
Cabinet insulation is CFC an d HCFC-fr ee fo amed-i n-pl ace pol yure thane of twoinch minimum thickness. Six-in ch cast ers, 2 with brakes, are standa rd. Legs ar e
available as an option.
Cutting board supplied with cabinet is 10” wide constructed of high-density white
polyethylene plastic. It is readily removable for cleaning. Pans furnished for top
are 4” deep and made of polycarbonate plastic.
REFRIGERATION
More robust refrigeration system provides added capacity and efficiency. Systems are designed using CFC and HCFC-free R134a refrigerant. Recirculated,
forced air from evaporator is moved under pans, which are recessed 2” from top
of cabinet. Forced air over the condenser is drawn through grille under bottom
drawer as well as the back and bottom of cabinet. Automatic condensate evaporator is provided to eliminate the need of floor drains.
FOOD PREPARATION
SERIES PREP TABLES
SPED48 ELITE SERIES
MEGA TOP WITH DRAWERS
SPED48-12M-2 (pictured)
ELECTRICAL CONNECTION
Units pre-wired at factory and
include 8’ long cord and plug set.
MODELS:
SPED48-M
*Note: Not all markings may apply to all model variations.
Available From:
Model Specified
Location
Store#
Quantity
Food Prep Table — Mega Top With Drawers
Models: SPED48-M
MODEL SPED48-12M-2 SPED48-12M-4 SPED48-18M-2 SPED48-18M-4
EXTERNAL DIMENSIONAL DATA
Length Overall (inches)
Length Overall (mm)
Depth Overall (inches)
Depth Overall (mm)
Height Overall— (inches)
Height Overall— (mm)
Number of drawers 2 4 2 4
Number of doors 1 - 1 -
Top Drawer Extension (when opened) 17 3/4” 17 3/4” 17 3/4” 17 3/4”
Bottom Drawer Extension (when opened) 15 3/4” 15 3/4” 15 3/4” 15 3/4”
INTERNAL DIMENSIONAL DATA
NET Capacity (cubic ft.)
NET Capacity (Liters)
Internal Length Overall (inches)
Internal Length Overall (mm)
Internal Depth Overall (inches)
Internal Depth Overall (mm)
Internal Height Overall—(inches)
Internal Height Overall—(mm)
ELECTRICAL DATA
Full Load Amperes 115/60/1 5 5 5 5
ENERGY CONSUMPTION (KWH) 4 4 4 4
REFRIGERATION DATA
Horsepower 1/4 1/4 1/4 1/4
WEIGHT DATA
Gross Weight (Crated lbs) 350 350 350 350
Gross Weight (Crated kg)
48”
1219
36 5/8”
930
45 1/2”
1156
13.9
394
44”
1118
19”
483
17 1/2”
445
159 159 159 159
48”
1219
36 5/8”
930
45 1/2”
1156
13.9
394
44”
1118
19”
483
17 1/2”
445
48”
1219
36 5/8”
930
45 1/2”
1156
13.9
394
44”
1118
19”
483
17 1/2”
445
48”
1219
36 5/8”
930
45 1/2”
1156
13.9
394
44”
1118
19”
483
17 1/2”
445
PLAN VIEWS
Note: Not all markings may apply to all model variations.
*N/A:: Not available at time of printing.
DRAWER SUPPORT CAPACITY
MODEL # OF PAN
SPED48 1 FULL SIZE PAN
SUPPORTS
(SUPPLIED)
2
3779 Champion Blvd. • Winston-Salem, NC 27105 USA • (336) 245-6400 • Fax (336) 245-6453 • (888) 845-9800 • www.beverage-air.com
POSSIBLE PAN
COMBINATION
2 HALF SIZE PANS
6 1/6TH SIZE PANS
3 1/3RD SIZE PANS
SPED48-12M
BEVERAGE-AIR® CORPORATION
Specifications are subject to change without prior notice. 06/13
TOP PAN
CONFIGURATIONS
SPED48-18M
Loading...