Beverage Air SPED48-08C-2 User Manual
Item No.
Quantity
3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax# 1-336-245-6453
http://www.Beverage-Air.com
Commercial Refrigeration Equipment
General Specification
3 Year Parts/Labor Warranty
Additional 2 Year Compressor Warranty
SPED48 ELITE SERIES — CUTTING TOP
WITH DRAWERS
Larger 17” wide cutting board prep table. Features enhanced refrigeration system. Improved airflow for less temperature gradient and uniform temperature
distribution throughout the cabinet. Pans are cooled from the bottom, eliminating
the necessity of air blanket. Airflow assures that product in open containers is
kept below 41°F and above freezing. This translates into increased product shelf
life, higher quality food, better food appearance, fresher product and a reduction
of bacteria build-up to combat food-borne illnesses.
CABINET CONSTRUCTION
Exterior construction includes heavy-duty stainless steel finish on front, sides,
top, drawers and grille. Removable hoods and insulated lid assemblies are made
of matching stainless steel. Cabinet back and bottom are constructed of galvanized steel. Interior liner is made of aluminum for superior resistance to corrosion.
In cabinets with doors and drawers, doors are mounted to face of cabinet on
cartridge-style hinges permitting them to self close under their own weight. Hinges also allow doors to stay open 120° and permit easy door removal for service
and cleaning if required. A plug-in type vinyl magnetic gasket is attached to
each door for positive seal.
Drawer frames are constructed of heavy-duty stainless steel and are supported
on heavy-duty telescoping drawer slides for maximum support of stored food
products. Slides have locking mechanism to prevent from drawers being pulled
off of cabinets. Upper pull-out drawers accommodate 4” deep pans. Lower pullout drawers accommodate up to 6” deep pans. Heavy-duty pan divider supports
are supplied. Foodservice pans for drawers are not included. Snap-type vinyl
magnetic gasket is attached to each drawer for positive seal. Top drawer extends 17 3/4” (when opened) and bottom drawer extends 15 3/4” (when opened).
Cabinet insulation is CFC an d HCFC-fr ee fo amed-i n-pl ace pol yure thane of twoinch minimum thickness. Six-in ch cast ers, 2 with brakes, are standa rd. Legs ar e
available as an option.
Cutting board supplied with cabinet is 17” wide constructed of high-density white
polyethylene plastic. It is readily removable for cleaning. Pans furnished for top
are 4” deep and made of polycarbonate plastic.
REFRIGERATION
More robust refrigeration system provides added capacity and efficiency. Systems are designed using CFC and HCFC-free R134a refrigerant. Reci rculated,
forced air from evaporator is moved under pans, which are recessed 2” from top
of cabinet. Forced air over the condenser is drawn through grille under bottom
drawer as well as the back and bottom of cabinet. Automatic condensate evaporator is provided to eliminate the need of floor drains.
FOOD PREPARATION
SERIES PREP TABLES
SPED48 ELITE SERIES
CUTTING TOP WITH DRAWERS
SPED48-12C-2 (pictured)
ELECTRICAL CONNECTION
Units pre-wired at factory and
include 8’ long cord and plug set.
MODELS:
SPED48-C
*Note: Not all markings may apply to all model variations.
Available From:
Model Specified
Location
Food Prep Table — Cutting Top With Drawers
Models: SPED48-C
Store#
Quantity
PLAN VIEWS
48”
36”
914
44”
19”
23”
SPED48-08C-4
1219
41 11/16”
1059
17 3/4”
15 3/4”
13.9
394
1118
483
584
275
125
MODEL SPED48-08C-2
EXTERNAL DIMENSIONAL DATA
Length Overall (inches)
Length Overall (mm)
Depth Overall (inches)
Depth Overall (mm)
Height Overall— (inches)
Height Overall— (mm)
Number of drawers 2
Number of doors 1
Top Drawer Extension (when opened) 17 3/4”
Bottom Drawer Extension (when opened) 15 3/4”
INTERNAL DIMENSIONAL DATA
NET Capacity (cubic ft.)
NET Capacity (Liters)
Internal Length Overall (inches)
Internal Length Overall (mm)
Internal Depth Overall (inches)
Internal Depth Overall (mm)
Internal Height Overall—(inches)
Internal Height Overall—(mm)
ELECTRICAL DATA
Full Load Amperes 115/60/1 5
ENERGY CONSUMPTION (KWH) 4
REFRIGERATION DATA
Horsepower 1/4
WEIGHT DATA
Gross Weight (Crated lbs) 275
Gross Weight (Crated kg) 125
1219
41 11/16”
1059
13.9
394
1118
483
584
48”
36”
914
44”
19”
23”
1/4
4
-
5
4
SPED48-10C-2
48”
1219
36”
914
41 11/16”
1059
2
1
17 3/4”
15 3/4”
13.9
394
44”
1118
19”
483
23”
584
5
4
1/4
290
132
SPED48-10C-4
48”
1219
36”
914
41 11/16”
1059
4
-
17 3/4”
15 3/4”
13.9
394
44”
1118
19”
483
23”
584
5
4
1/4
290
132
SPED48-12C-2
48”
1219
36”
914
41 11/16”
1059
2
1
17 3/4”
15 3/4”
13.9
394
44”
1118
19”
483
23”
584
5
4
1/4
359
163
SPED48-12C-4
48”
1219
36”
914
41 11/16”
1059
4
-
17 3/4”
15 3/4”
13.9
394
44”
1118
19”
483
23”
584
5
4
1/4
270
123
Note: Not all markings may apply to all model variations.
*N/A:: Not available at time of printing.
DRAWER SUPPORT CAPACITY
MODEL # OF PAN
SUPPORTS
(SUPPLIED)
SPED48 1 1 HALF SIZE AND
3779 Champion Blvd. • Winston-Salem, NC 27105 USA • (336) 245-6400 • Fax (336) 245-6453 • (888) 845-9800 • www.beverage-air.com
POSSIBLE PAN
COMBINATION
2 1/6TH SIZE
1 HALF SIZE AND
1 1/3RD SIZE
TOP PAN
CONFIGURATIONS
SPED48-08C
SPED48-10C
BEVERAGE-AIR® CORPORATION
Specifications are subject to change without prior notice. 06/13
SPED48-12C
Loading...