Beverage Air SPED48-08-2 User Manual
Item No.
Quantity
3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax# 1-336-245-6453
http://www.Beverage-Air.com
Commercial Refrigeration Equipment
General Specification
3 Year Parts/Labor Warranty
Additional 2 Year Compressor Warranty
SPED48 ELITE SERIES — STANDARD TOP
WITH DRAWERS
All around prep table with enhanced refrigeration system. Improved airflow
for less temperature gradient and uniform temperature distribution throughout the cabinet. Pans are cooled from the bottom, eliminating the necessity
of air blanket. Airflow assures that product in open containers is kept below
41°F and above freezing. This translates into increased product shelf life,
higher quality food, better food appearance, fresher product and a reduction
of bacteria build-up to combat food-borne illnesses.
CABINET CONSTRUCTION
Exterior construction includes heavy-duty stainless steel finish on front,
sides, top, drawers and grille. Removable hoods and insulated lid assemblies are made of matching stainless steel. Cabinet back and bottom are
constructed of galvanized steel. Interior liner is made of aluminum for superior resistance to corrosion.
In cabinets with doors and drawers, doors are mounted to face of cabinet
on cartridge-style hinges permitting them to self close under their own
weight. Hinges also allow doors to stay open 120° and permit easy door
removal for service and cleaning if required. A plug-in type vinyl magnetic
gasket is attached to each door for positive seal.
Drawer frames are constructed of heavy-duty stainless steel and are supported on heavy-duty telescoping drawer slides for maximum support of
stored food products. Slides have locking mechanism to prevent from
drawers being pulled off of cabinets. Upper pull-out drawers accommodate
4” deep pans. Lower pull-out drawers accommodate up to 6” deep pans.
Heavy-duty pan divider supports are supplied. Foodservice pans for drawers are not included. Snap-type vinyl magnetic gasket is attached to each
drawer for positive seal. Top drawer extends 17 3/4” (when opened) and
bottom drawer extends 15 3/4” (when opened).
Cabinet insulation is CFC and HCFC-free foamed-in-place polyurethane of
two-inch minimum thickness. Six-inch casters, 2 with brakes, are standard.
Legs are available as an option.
Cutting board supplied with cabinet is 10” wide constructed of high-density
white polyethylene plastic. It is readily removable for cleaning. Pans
furnished for top are 4” deep and made of polycarbonate plastic.
REFRIGERATION
More robust refrigeration system provides added capacity and efficiency.
Systems are designed using CFC and HCFC-free R134a refrigerant.
Recirculated, forced air from evaporator is moved under pans, which are
recessed 2” from top of cabinet. Forced air over the condenser is drawn
through grille under bottom drawer as well as the back and bottom of cabinet. Automatic condensate evaporator is provided to eliminate the need of
floor drains.
FOOD PREPARATION
SERIES PREP TABLES
SPED48 ELITE SERIES
STANDARD TOP WITH DRAWERS
SPED48-12-2 (pictured)
ELECTRICAL CONNECTION
Units pre-wired at factory and
include 8’ long cord and plug set.
MODELS:
SPED48
*Note: Not all markings may apply to all model variations.
Available From:
Model Specified
Location
Food Prep Table — Standard Top With Drawers
Models: SPED48
Store#
Quantity
PLAN VIEWS
48”
743
13.9
394
44”
19”
483
23”
584
SPED48-08-4
1219
29 1/4”
41 11/16”
1059
17 3/4”
15 3/4”
1118
MODEL SPED48-08-2
EXTERNAL DIMENSIONAL DATA
Length Overall (inches)
Length Overall (mm)
Depth Overall (inches)
Depth Overall (mm)
Height Overall— (inches)
Height Overall— (mm)
Number of drawers 2
Number of doors 1
Top Drawer Extension (when opened) 17 3/4”
Bottom Drawer Extension (when opened) 15 3/4”
INTERNAL DIMENSIONAL DATA
NET Capacity (cubic ft.)
NET Capacity (Liters)
Internal Length Overall (inches)
Internal Length Overall (mm)
Internal Depth Overall (inches)
Internal Depth Overall (mm)
Internal Height Overall—(inches)
Internal Height Overall—(mm)
ELECTRICAL DATA
Full Load Amperes 115/60/1 5
ENERGY CONSUMPTION (KWH) 4
REFRIGERATION DATA
Horsepower 1/4
WEIGHT DATA
Gross Weight (Crated lbs) 275
Gross Weight (Crated kg) 125
1219
29 1/4”
41 11/16”
1059
1118
48”
743
13.9
394
44”
19”
483
23”
584
1/4
275
125
SPED48-10-2
4
-
5
4
48”
1219
29 1/4”
743
41 11/16”
1059
2
1
17 3/4”
15 3/4”
13.9
394
44”
1118
19”
483
23”
584
5
4
1/4
290
132
SPED48-10-4
48”
1219
29 1/4”
743
41 11/16”
1059
4
-
17 3/4”
15 3/4”
13.9
394
44”
1118
19”
483
23”
584
5
4
1/4
290
132
SPED48-12-2
48”
1219
29 1/4”
743
41 11/16”
1059
2
1
17 3/4”
15 3/4”
13.9
394
44”
1118
19”
483
23”
584
5
4
1/4
331
150
SPED48-12-4
48”
1219
29 1/4”
743
41 11/16”
1059
4
-
17 3/4”
15 3/4”
13.9
394
44”
1118
19”
483
23”
584
5
4
1/4
300
136
Note: Not all markings may apply to all model variations.
*N/A:: Not available at time of printing.
DRAWER SUPPORT CAPACITY
MODEL # OF PAN
SUPPORTS
(SUPPLIED)
SPED48 1 1 HALF SIZE AND
3779 Champion Blvd. • Winston-Salem, NC 27105 USA • (336) 245-6400 • Fax (336) 245-6453 • (888) 845-9800 • www.beverage-air.com
POSSIBLE PAN
COMBINATION
2 1/6TH SIZE
1 HALF SIZE AND
1 1/3RD SIZE
TOP PAN
CONFIGURATIONS
SPED48-08
SPED48-10
BEVERAGE-AIR® CORPORATION
Specifications are subject to change without prior notice. 06/13
SPED48-12
Loading...