Beverage Air SPED36-15M User Manual

Item No.
Quantity

3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax# [phone]
http://www.Beverage-Air.com

Commercial Refrigeration Equipment
General Specification

3 Year Parts/Labor Warranty

Additional 2 Year Compressor Warranty

SPED36 ELITE SERIES — MEGA TOP

Fifty percent greater pan capacity than the all around standard prep table.
Features enhanced refrigeration system and new and improved grille
system for better airflow and less temperature gradient. Improved design
provides better airflow management and uniform temperature distribution
throughout the cabinet. Pans are cooled from the bottom, eliminating the
necessity of air blanket. Airflow assures that product in open containers is
kept below 41°F and above freezing. This translates into increased product
shelf life, higher quality food, better food appearance, fresher product and a
reduction of bacteria build-up to combat food-borne illnesses.

CABINET CONSTRUCTION

Exterior construction includes heavy-duty stainless steel finish on front,
sides, top, drawers and grille. Removable hoods and insulated lid assem­blies are made of matching stainless steel. Cabinet back and bottom are
constructed of galvanized steel. Interior liner is made of aluminum for
superior resistance to corrosion.

Drawer frames are constructed of heavy-duty stainless steel and are
supported on heavy-duty telescoping drawer slides for maximum support of
stored food products. Slides have locking mechanism to prevent from
drawers being pulled off of cabinets. Upper pull-out drawers accommodate
4” deep pans. Lower pull-out drawers accommodate up to 6” deep pans.
Heavy-duty pan divider supports are supplied. Foodservice pans for draw­ers are not included. Snap-type vinyl magnetic gasket is attached to each
drawer for positive seal. Top drawer extends 17 3/4” (when opened) and
bottom drawer extends 15 3/4” (when opened).

Cabinet insulation is CFC and HCFC-free foamed-in-place polyurethane of
two-inch minimum thickness. Six-inch casters, 2 with brakes, are standard.
Legs are available as an option.

Cutting board supplied with cabinet is 10” deep constructed of high-density
white polyethylene plastic. It is readily removable for cleaning. Pans
furnished for top are 4” deep and made of polycarbonate plastic.

REFRIGERATION

More robust refrigeration system provides added capacity and efficiency.
Systems are designed using CFC free R134a refrigerant and capillary tube
between condenser and evaporator. Recirculated, forced air from evapora­tor is moved under pans, which are recessed 2” from top of cabinet. Forced
air over the condenser is drawn through grille under door as well as the
back and bottom of cabinet. Automatic condensate evaporator is provided
to eliminate the need of floor drains.

FOOD PREPARATION
SERIES PREP TABLES

SPED36 ELITE SERIES
MEGA TOP

SPED36-12M

ELECTRICAL CONNECTION

Units pre-wired at factory and

include 8’ long
cord and plug

MODELS:
SPED36-12M
SPED36-15M

Available From:

Model Specified
Location

Store#
Quantity

Food Preparation Table — Mega Top

Models: SPED36

MODEL SPED36-12M SPED36-15M

EXTERNAL DIMENSIONAL DATA

Length Overall (inches)
Length Overall (mm)

Depth Overall (inches)
Depth Overall (mm)

Height Overall— (inches)
Height Overall— (mm)

Number of Drawers 2 2

Top Drawer Extension (when opened) 17 3/4” 17 3/4”
Bottom Drawer Extension (when opened) 15 3/4” 15 3/4”
INTERNAL DIMENSIONAL DATA
NET Capacity (cubic ft.)

NET Capacity (Liters)
Internal Length Overall (inches)

Internal Length Overall (mm)
Internal Depth Overall (inches)

Internal Depth Overall (mm)
Internal Height Overall—(inches)

Internal Height Overall—(mm)
Number of shelves 4 4
ELECTRICAL DATA
Full Load Amperes 115/60/1 5 5
REFRIGERATION DATA
Horsepower 1/4 1/4
WEIGHT DATA
Gross Weight (Crated lbs) 309 320
Gross Weight (Crated kg) 140 145

36”
914

38 5/16”

973

45 9/16”

1157

10.2
289

32”
813

20”
508

18”
457

36”
914

38 5/16”

973

45 9/16”

1157

10.2
289

32”
813

20”
508

18”
457

PLAN VIEWS

DRAWER SUPPORT CAPACITY

# OF PAN

MODEL

SPED36

SUPPORTS
(SUPPLIED)

1 WIDE

and

2 NARROW

(1) FULL SIZE PAN + (1) 1/3 SIZE PAN OR

POSSIBLE PAN

COMBINATION

(4) 1/3 SIZE PANS OR

(8) 1/6 SIZE PANS

SPED36-12M

Pan Configuration

SPED36-15M

Pan Configuration

BEVERAGE-AIR® CORPORATION

3779 Champion Blvd. • Winston-Salem, NC 27105 USA • [phone] • Fax [phone] • [phone] • www.beverage-air.com

Specifications are subject to change without prior notice. 06/13