Item No.
Quantity
3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax# 1-336-245-6453
http://www.Beverage-Air.com
Commercial Refrigeration Equipment
General Specification
SPED27 ELITE SERIES — CUTTING TOP
WITH DRAWERS
Larger 17” wide cutting board prep table. Features enhanced refrigeration system. Improved airflow for less temperature gradient and uniform temperature distribution throughout the cabinet. Pans are cooled
from the bottom, eliminating the necessity of air blanket. Airflow assures that product in open containers is kept below 41°F and above
freezing. This translates into increased product shelf life, higher quality
food, better food appearance, fresher product and a reduction of bacteria build-up to combat food-borne illnesses.
CABINET CONSTRUCTION
Exterior construction includes heavy-duty stainless steel finish on front,
sides, top, drawers and grille. Removable hoods and insulated lid
assemblies are made of matching stainless steel. Cabinet back and
bottom are constructed of galvanized steel. Interior liner is made of
anodized aluminum for superior resistance to corrosion.
Drawer frames are constructed of heavy-duty stainless steel and are
supported on heavy-duty telescoping drawer slides for maximum
support of stored food products. The drawer slides have a locking
mechanism that prevents the drawers from being inadvertently pulled
off the cabinets. Upper pull-out drawers accommodate 6” deep pans.
Lower pull-out drawers accommodate two 4” deep pans. Heavy-duty
pan divider supports are supplied. Foodservice pans for drawers are
not included. Snap-type vinyl magnetic gasket is attached to each
drawer for positive seal.
Cabinet insulation is CFC and HCFC-free foamed-in-place polyurethane of two-inch minimum thickness. Six-inch casters, 2 with brakes,
are standard. Legs are available as an option.
Cutting board supplied with cabinet is 17” wide constructed of highdensity white polyethylene plastic. It is readily removable for cleaning.
Pans furnished for top are 4” deep and made of polycarbonate plastic.
REFRIGERATION
More robust refrigeration system provides added capacity and
efficiency. Systems are designed using CFC and HCFC-free R134a
refrigerant. Recirculated, forced air from evaporator is moved under
pans, which are recessed 2” from top of cabinet. Forced air over the
condenser is drawn through grille under bottom drawer as well as the
back and bottom of cabinet. Automatic condensate evaporator is
provided to eliminate the need of floor drains.
FOOD PREPARATION
SERIES PREP TABLES
SPED27 ELITE SERIES
CUTTING TOP WITH DRAWERS
SPE27C
ELECTRICAL CONNECTION
Units pre-wired at factory and
include 8’ long cord and plug set.
MODELS:
SPED27C-A
SPED27C-B
*Note: Not all markings may apply to all model variations.
Available From:
Model Specified
Location
Food Prep Table — Cutting Top With Drawers
Models: SPED27C-A, SPED27C-B
MODEL SPED27C-A
EXTERNAL DIMENSIONAL DATA
Length Overall (inches)
Length Overall (mm)
Depth Overall (inches)
Depth Overall (mm)
Height Overall— (inches)
Height Overall— (mm)
Number of drawers 2
Top Drawer Extension (when opened) 17 3/4”
Bottom Drawer Extension (when opened) 15 3/4”
INTERNAL DIMENSIONAL DATA
NET Capacity (cubic ft.)
NET Capacity (Liters)
Internal Length Overall (inches)
Internal Length Overall (mm)
Internal Depth Overall (inches)
Internal Depth Overall (mm)
Internal Height Overall—(inches)
Internal Height Overall—(mm)
Number of pans 6 1/6 size &
ELECTRICAL DATA
Full Load Amperes 115/60/1 4
REFRIGERATION DATA
Horsepower 1/6
WEIGHT DATA
Gross Weight (Crated lbs) 227
Gross Weight (Crated kg) 103
27”
686
37 7/8”
962
41 11/16”
1059
7.3
207
23 1/16”
586
19”
483
23”
584
2 1/9 size
SPED27C-B
27”
686
37 7/8”
962
41 11/16”
1059
2
17 3/4”
15 3/4”
7.3
207
23 1/16”
586
19”
483
23”
584
8 1/6 size
4
1/6
227
103
Store#
Quantity
PLAN VIEWS
Note: Not all markings may apply to all model variations.
*N/A:: Not available at time of printing.
DRAWER SUPPORT CAPACITY
MODEL # OF PAN
SPED27 1 FULL SIZE PAN
SUPPORTS
(SUPPLIED)
2
3779 Champion Blvd. • Winston-Salem, NC 27105 USA • (336) 245-6400 • Fax (336) 245-6453 • (888) 845-9800 • www.beverage-air.com
POSSIBLE PAN
COMBINATION
2 HALF SIZE PANS
6 1/6TH SIZE PANS
3 1/3RD SIZE PANS
TOP PAN
CONFIGURATION
BEVERAGE-AIR® CORPORATION
Specifications are subject to change without prior notice. 06/10