Beverage Air SPED27-B User Manual

Item No.
Quantity

3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax# [phone]
http://www.Beverage-Air.com

Commercial Refrigeration Equipment
General Specification

3 Year Parts/Labor Warranty

Additional 2 Year Compressor Warranty

SPED27 ELITE SERIES — STANDARD TOP
WITH DRAWERS

All around prep table with enhanced refrigeration system. Improved
airflow for less temperature gradient and uniform temperature distribu­tion throughout the cabinet. Pans are cooled from the bottom, eliminat­ing the necessity of air blanket. Airflow assures that product in open
containers is kept below 41°F and above freezing. This translates into
increased product shelf life, higher quality food, better food appear­ance, fresher product and a reduction of bacteria build-up to combat
food-borne illnesses.

CABINET CONSTRUCTION

Exterior construction includes heavy-duty stainless steel finish on front,
sides, top, drawers and grille. Removable hoods and insulated lid as­semblies are made of matching stainless steel. Cabinet back and bot­tom are constructed of galvanized steel. Interior liner is made of alumi­num for superior resistance to corrosion.

Drawer frames are constructed of heavy-duty stainless steel and are
supported on heavy-duty telescoping drawer slides for maximum sup­port of stored food products. The drawer slides have a locking mecha­nism that prevents the drawers from being inadvertently pulled off the
cabinets. Upper pull-out drawers accommodate 4” deep pans. Lower
pull-out drawers accommodate up to 6” deep pans. Heavy-duty pan
divider supports are supplied. Foodservice pans for drawers are not
included. Snap-type vinyl magnetic gasket is attached to each
drawer for positive seal. Top drawer extends 17 3/4” (when
opened) and bottom drawer extends 15 3/4” (when opened).

Cabinet insulation is CFC and HCFC-free foamed-in-place polyure­thane of two-inch minimum thickness. Six-inch casters, 2 with brakes,
are standard. Legs are available as an option.

Cutting board supplied with cabinet is 10” wide constructed of high­density white polyethylene plastic. It is readily removable for cleaning.
Pans furnished for top are 4” deep and made of polycarbonate plastic.

REFRIGERATION

More robust refrigeration system provides added capacity and effi­ciency. Systems are designed using CFC and HCFC-free R134a refrig­erant. Recirculated, forced air from evaporator is moved under pans,
which are recessed 2” from top of cabinet. Forced air over the conden­ser is drawn through grille under bottom drawer as well as the back and
bottom of cabinet. Automatic condensate evaporator is provided to
eliminate the need of floor drains.

FOOD PREPARATION
SERIES PREP TABLES

SPED27 ELITE SERIES
STANDARD TOP WITH DRAWERS

SPED27

ELECTRICAL CONNECTION

Units pre-wired at factory and
include 8’ long cord and plug set.

MODELS:
SPED27-A
SPED27-B

*Note: Not all markings may apply to all model variations.

Available From:

Model Specified
Location

Store#
Quantity

Food Prep Table — Standard Top With Drawers

Models: SPED27A, SPED27B

MODEL SPED27A

EXTERNAL DIMENSIONAL DATA

Length Overall (inches)
Length Overall (mm)

Depth Overall (inches)
Depth Overall (mm)

Height Overall— (inches)
Height Overall— (mm)

Number of drawers 2

Top Drawer Extension (when opened) 17 3/4”
Bottom Drawer Extension (when opened) 15 3/4”
INTERNAL DIMENSIONAL DATA
NET Capacity (cubic ft.)

NET Capacity (Liters)
Internal Length Overall (inches)

Internal Length Overall (mm)
Internal Depth Overall (inches)

Internal Depth Overall (mm)
Internal Height Overall—(inches)

Internal Height Overall—(mm)
Number of pans 6 1/6 size &

ELECTRICAL DATA
Full Load Amperes 115/60/1 4
REFRIGERATION DATA
Horsepower 1/6
WEIGHT DATA
Gross Weight (Crated lbs) 227
Gross Weight (Crated kg) 103

27”
686

31”
787

41 11/16”

1059

7.3
207

23 1/16”

586
19”

483
23”

584

2 1/9 size

SPED27B

27”
686

31”
787

41 11/16”

1059

2

17 3/4”
15 3/4”

7.3
207

23 1/16”

586
19”

483
23”

584

8 1/6 size

4

1/6

227
103

PLAN VIEWS

Note: Not all markings may apply to all model variations.

*N/A:: Not available at time of printing.

DRAWER SUPPORT CAPACITY

MODEL # OF PAN

SPED27 1 FULL SIZE PAN

SUPPORTS
(SUPPLIED)

2

3779 Champion Blvd. • Winston-Salem, NC 27105 USA • [phone] • Fax [phone] • [phone] • www.beverage-air.com

POSSIBLE PAN

COMBINATION

2 HALF SIZE PANS

6 1/6TH SIZE PANS

3 1/3RD SIZE PANS

TOP PAN

CONFIGURATION

BEVERAGE-AIR® CORPORATION

Specifications are subject to change without prior notice. 06/13