Beverage Air SPE72-10C User Manual

Item No.
Quantity

3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax# [phone]
http://www.Beverage-Air.com

Commercial Refrigeration Equipment
General Specification

3 Year Parts/Labor Warranty

Additional 2 Year Compressor Warranty

SPE72 ELITE SERIES — CUTTING TOP

Larger 17” wide cutting board prep table. Features enhanced re­frigeration system. Improved airflow and less temperature gradient
inside the cabinet. Better airflow management and uniform temper­ature distribution throughout the cabinet. Pans are cooled from the
bottom, eliminating the necessity of air blanket. Airflow assures that
product in open containers is kept below 41°F and above freezing.
This translates into increased product shelf life, higher quality food,
better food appearance, fresher product and a reduction of bacteria
build-up to combat food-borne illnesses.

CABINET CONSTRUCTION

Exterior construction includes heavy-duty stainless steel finish on
front, sides, top, door(s) and grille. Removable hoods and insulated
lid assemblies are made of matching stainless steel. Cabinet back
and bottom are constructed of galvanized steel. Interior liner is
made of aluminum for superior resistance to corrosion.

Doors are mounted to face of cabinet on cartridge style hing es per­mitting them to self close under their own weight. Hinges also allow
doors to stay open 120° and permit easy door removal for service
and cleaning if required. A plug in type vinyl magnetic gasket is
attached to each door for positive seal. Door handle is m ade from
extruded aluminum with a black anodized finish. It is contoured to
permit easy opening of doors with fingers from both top and bottom
of handle.

Cabinet insulation is CFC free foamed-in-place polyurethane of t wo

-inch minimum thickness. Six-inch casters, 2 with brakes, are
standard. Legs are available as an option.

Cutting board supplied with cabinet is 17” wide constructed of high­density white polyethylene plastic. It is readily removable for clean­ing. Two epoxy-coated steel wire shelves are supplied as stand ard.
Pans furnished are 4” deep and made of polycarbonate plastic.

REFRIGERATION

More robust refrigeration system provides added capacity and effi­ciency. Systems are designed using CFC free R134a refrigerant.
Forced air from evaporator is moved under pans, which are re­cessed 2” from top of cabinet. Forced air over the condenser is
drawn from back and bottom of cabinet. Automatic condensate
evaporator is provided to eliminate the need of floor drains.

FOOD PREPARATION
SERIES PREP TABLES

SPE72 ELITE SERIES
CUTTING TOP

SPE72-18C

ELECTRICAL CONNECTION

Units pre-wired at factory and

include 8’ long
cord and plug

MODELS:
SPE72-08C
SPE72-10C
SPE72-12C
SPE72-18C

Available From:

Model Specified
Location

Food Preparation Table — Cutting Top

Models: SPE72-08C, SPE72-10C, SPE72-12C, SPE72-18C

MODEL SPE72-08C

EXTERNAL DIMENSIONAL DATA

Length Overall (inches)
Length Overall (mm)

Depth Overall (inches)
Depth Overall (mm)

Height Overall— (inches)
Height Overall— (mm)

Number of doors 3

Depth with Door Open 90 o 50 7/8”
Clear Door Opening (inches) 19 1/2” x 21 1/2”
INTERNAL DIMENSIONAL DATA
NET Capacity (cubic ft.)

NET Capacity (Liters)
Internal Length Overall (inches)

Internal Length Overall (mm)
Internal Depth Overall (inches)

Internal Depth Overall (mm)
Internal Height Overall—(inches)

Internal Height Overall—(mm)
Number of shelves 6
ELECTRICAL DATA
Full Load Amperes 115/60/ 1 9.6

ENERGY CONSUMPTION (KWH) 4.4
REFRIGERATION DATA

Horsepower 1/3
WEIGHT DATA
Gross Weight (Crated lbs) 431
Gross Weight (Crated kg) 196

72”

1829

36”
914

41 11/16”

1059

21.5
609

68”

1727

19 1/4”

489

17 1/2”

445

SPE72-10C

72”

1829

36”
914

41 11/16”

1059

3

50 7/8”

19 1/2” x 21 1/2”

21.5
609

68”

1727

19 1/4”

489

17 1/2”

445

6

9.6

4.4

1/3

430
195

SPE72-12C

72”

1829

36”
914

41 11/16”

1059

3

50 7/8”

19 1/2” x 21 1/2”

21.5
609

68”

1727

19 1/4”

489

17 1/2”

445

6

9.6

4.4

1/3

406
184

Store#
Quantity

SPE72-18C

72”

1829

36”
914

41 11/16”

1059

3

50 7/8”

19 1/2” x 21 1/2”

21.5
609

68”

1727

19 1/4”

489

17 1/2”

445

6

9.6

4.4

1/3

355
161

PLAN VIEWS

SPE72-08C

TOP VIEW

SPE72-10C

TOP VIEW

SPE72-12C

TOP VIEW

SPE72-18C

TOP VIEW

BEVERAGE-AIR® CORPORATION

3779 Champion Blvd. • Winston-Salem, NC 27105 USA • [phone] • Fax [phone] • [phone] • www.beverage-air.com

Specifications are subject to change without prior notice. 06/13