Beverage Air SPE48-18M-STL User Manual

Item No.
Quantity

3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax# [phone]
http://www.Beverage-Air.com

CUSTOMER’S CHOICE FOR A HOT KITCHEN
Tested & Certified to Ambient Class of 100°F

3 Year Parts/Labor Warranty

Additional 2 Year Compressor Warranty

SPE48 ELITE SERIES — MEGA TOP WITH SEE-THRU LID

Fifty percent greater pan capacity than the all around standard prep table.
Features enhanced refrigeration system and new and improved grille sys­tem for better airflow and less temperature gradient. Improved design pro­vides better airflow management and uniform temperature distribution
throughout the cabinet. Pans are cooled from the bottom, eliminating the
necessity of air blanket. Airflow assures that product in open containers is
kept below 41°F and above freezing. This translates into increased product
shelf life, higher quality food, better food appearance, fresher product and a
reduction of bacteria build-up to combat food-borne illnesses.

CABINET CONSTRUCTION

Exterior construction includes heavy-duty stainless steel finish on front,
sides, top, door(s) and grille. Cabinet back and bottom are constructed of
galvanized steel. Interior liner is made of aluminum for superior resistance
to corrosion.

Doors are mounted to face of cabinet on cartridge style hinges permitting
them to self close under their own weight. Hinges also allow doors to stay
open 120° and permit easy door removal for service and cleaning if re­quired. A plug in type vinyl magnetic gasket is attached to each door for
positive seal. Door handle is made from extruded aluminum with a black
anodized finish. It is contoured to permit easy opening of doors with fingers
from both top and bottom of handle.

Cabinet insulation is CFC free foamed-in-place polyurethane of two-inch
minimum thickness. Six-inch casters, 2 with brakes, are standard. Legs are
available as an option.

Cutting board supplied with cabinet is 10” wide constructed of high-density
white polyethylene plastic. It is readily removable for cleaning. Two epoxy­coated steel wire shelves per section are supplied as standard.
Pans furnished are

See-Thru Lid Construction

Features 1-piece hinge with hydraulic lift. Self-closing lid features variable
set points for height variations.

Note: If sides are exposed to customer, side guards are required.

REFRIGERATION

More robust refrigeration system provides added capacity and efficiency.
Systems are designed using CFC free R134a refrigerant and capillary tube
between condenser and evaporator. Recirculated, forced air from evapora­tor is moved under pans, which are recessed 2” from top of cabinet. Forced
air over the condenser is drawn through grille under door as well as the
back and bottom of cabinet. Automatic condensate evaporator is provided
to eliminate the need of floor drains.

1/6 size and made of polycarbonate plastic.

FOOD PREPARATION
SERIES PREP TABLES

SPE48 ELITE SERIES
MEGA TOP
WITH SEE-THRU GLASS LID

SPE48-18M-STL

(60” UNIT SHOWN WITH

SEE-THRU GLASS LID)

ELECTRICAL CONNECTION

Units pre-wired at factory and

include 8’ long
cord and plug

MODELS:
SPE48-18M-STL

Available From:

Model Specified
Location

Food Preparation Table — Mega Top

Models: SPE48-18M-STL With See-Thru Lid

MODEL SPE48-18M-STL

EXTERNAL DIMENSIONAL DATA

Length Overall (inches)
Length Overall (mm)

Depth Overall (inches) - includes cutting board
Depth Overall (mm) - includes cutting board

Height Overall— (inches)
Height Overall— (mm) - with lid closed

Number of doors 2

Depth with Door Open 90
Clear Door Opening (inches) 19 3/8” x 22”
INTERNAL DIMENSIONAL DATA
NET Capacity (cubic ft.)

NET Capacity (Liters)
Internal Length Overall (inches)

Internal Length Overall (mm)
Internal Depth Overall (inches)

Internal Depth Overall (mm)
Internal Height Overall—(inches)

Internal Height Overall—(mm)
Number of shelves 4
ELECTRICAL DATA
Full Load Amperes 115/60/1 5

ENERGY CONSUMPTION (KWH) 4
REFRIGERATION DATA

Horsepower 1/4
WEIGHT DATA
Gross Weight (Crated lbs) 338
Gross Weight (Crated kg) 153

- with lid closed

o

52 1/4”

48”

1219

37 3/4”

959

37 5/8”

956

13.9
394

44”

1118

20”
508

18”
457

SPE48-18M-STL

FRONT VIEW

WITH LID CLOSED

Store#
Quantity

PLAN VIEWS

SPE48-18M-STL

END VIEW

WITH LID CLOSED

SPE48-18M-STL

FRONT VIEW

WITH LID OPEN

SPE48-18M-STL

END VIEW

WITH LID OPEN

BEVERAGE-AIR® CORPORATION

3779 Champion Blvd. • Winston-Salem, NC 27105 USA • [phone] • Fax [phone] • [phone] • www.beverage-air.com

Specifications are subject to change without prior notice. 11/13