Beverage Air SPE27-SNZ User Manual

Item No.
Quantity

3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax# [phone]
http://www.Beverage-Air.com

Commercial Refrigeration Equipment
General Specification

3 Year Parts/Labor Warranty

Additional 2 Year Compressor Warranty

SPE ELITE SERIES — Condiment Stations

All around prep table series with enhanced refrigeration system and new and
improved grille system for better airflow and less temperature gradient. Improved
design envelops cold air around pans and provides uniform temperature distribu­tion throughout the cabinet. Airflow assures that product in open containers is
kept below 41°F and above freezing. This translates into increased product shelf
life, higher quality food, better food appearance, fresher product and a reduction
of bacteria build-up to combat food-borne illnesses.

CABINET CONSTRUCTION

Exterior construction includes heavy-duty stainless steel finish on front, sides,
top, door(s), back and grille. Sneeze guard assembly constructed of stainless
steel and clear plastic.

Doors (cabinet front only) are mounted to face of cabinet on cartridge style hing­es permitting them to self close. Hinges also allow doors to stay open 120°. A
plug in type vinyl magnetic gasket is attached to each door for positive seal.
Door handle is made from extruded aluminum with a black anodized finish. It is
contoured to permit eas y openi ng of doo rs with f ingers from bo th top and botto m
of handle. Digital thermometer on door to monitor interior cabinet temperature.

Cabinet insulation is CFC and HCFC-free foamed-in-place polyurethane of two­inch minimum thickness.

Six-inch adjustable legs are standard. Six-inch casters and three-inch ADA
compliant casters are available.

Dual-sided countertop is constructed of stainless steel for added durability.
SPE27-SNZ will accommodate 8-1/6th size pans. SPE48-12-SNZ will accom­modate 12-1/6th size pans. Pans furnished are 4” deep and made of polycar­bonate plastic and are centered for service on both sides of unit (will accommo-
date up to 6” deep food service pans—not included).

Two epoxy-coated steel wire shelves per door section supplied as standard.

REFRIGERATION

More robust refrigeration system provides added capacity and efficiency. Sys­tems are designed using CFC free R134a refrigerant and capillary tube between
condenser and evaporator. Recirculated, forced air from evaporator is moved
under pans, which are recessed 2” from top of cabinet. Forced air over the con­denser is drawn through grille under door as well as the back and bottom of
cabinet. Automatic condensate evaporator is provided to eliminate the need of
floor drains.

CERTIFICATIONS

Designed and tested in 86°F ambient to 20 09 NSF/ANSI 7 sta ndard to hold food
product below 41°F. Food must be pre-chilled before placing into pans. Approv­als: UL-EPH, NSF7 for Open Buffets, and Canadian (CSA).

FOOD PREPARATION
SERIES PREP TABLES

SPE ELITE SERIES
WITH SNEEZE GUARD

CONDIMENT STATIONS

Optional Night Covers Available

For Condiment Stations

SPE27-SNZ

(SHOWN WITH

OPTIONAL 6” LEGS)

SPE48-12-SNZ

(SHOWN WITH

STANDARD 6” CASTERS)

ELECTRICAL CONNECTION

Units pre-wired at factory
and include 8’ long cord and
plug set located at rear,
bottom left.

MODELS:
SPE27-SNZ
SPE48-12-SNZ

Model Specified
Location

Store#
Quantity

Food Preparation Table

Models: SPE27-SNZ, SPE48-12-SNZ

MODEL SPE27-SNZ

EXTERNAL DIMENSIONAL DATA

Length Overall (inches) / (mm)

Includes overall sneeze guard

Depth Overall (inches) / (mm)

Includes door and handle

Height Overall (inches) / (mm) 53 1/8” / 1349 53 1/8” / 1349
Working Height (inches) / (mm) 35 5/8” / 905
Number of doors

Depth with Door Open 90 o 55 1/8”
Clear Door Opening (inches) 22 1/2” x 21 1/2”
INTERNAL DIMENSIONAL DATA
NET Capacity (cubic ft.)

NET Capacity (Liters)
Number of shelves 2

ELECTRICAL DATA
Full Load Amperes 115/60/ 1 4.0
REFRIGERATION DATA
Horsepower 1/6
WEIGHT DATA
Gross Weight (Crated lbs) 202
Gross Weight (Crated kg) 92

27 5/8” / 702

30 1/8” / 765

1

7.3

207

SPE48-12-SNZ

48 5/8” / 1235

30 1/8” / 765

35 5/8” / 905

22 1/2” x 21 1/2”

2

55 1/8”

13.9
394

4

5.0

1/4

309
140

SPE27-SNZ

FRONT VIEW

PLAN VIEWS

SPE48-12-SNZ

FRONT VIEW

PAN

CONFIGURATION

COMMON

END VIEW

BEVERAGE-AIR® CORPORATION

3779 Champion Blvd. • Winston-Salem, NC 27105 USA • [phone] • Fax [phone] • [phone] • www.beverage-air.com

Specifications are subject to change without prior notice. 06/13